Heubach International
Heubach International
Girgaon, Mumbai, Maharashtra
SEND SMS
SEND EMAIL

AISI 4130 Pipes

Leading Exporter of chromoly 4130 alloy steel pipes, aisi 4130 seamless tubes, aisi 4130 alloy steel tube, aisi 4130 seamless pipes, chrome moly alloy steel pipes and aisi 4130 tubes from Mumbai.

Chromoly 4130 Alloy Steel Pipes

Chromoly 4130 Alloy Steel Pipes
  • Chromoly 4130 Alloy Steel Pipes
  • Chromoly 4130 Alloy Steel Pipes
  • Chromoly 4130 Alloy Steel Pipes
  • Chromoly 4130 Alloy Steel Pipes
  • Chromoly 4130 Alloy Steel Pipes
  • Chromoly 4130 Alloy Steel Pipes
  • Chromoly 4130 Alloy Steel Pipes
  • Chromoly 4130 Alloy Steel Pipes
  • Chromoly 4130 Alloy Steel Pipes
  • Chromoly 4130 Alloy Steel Pipes
Get Best Quote
Approx. Price: Rs 400 / MeterGet Latest Price

Product Details:

Minimum Order Quantity50 Meter
Outer Diameter1/2 TO 20 INCH
EndPLAIN
Length3m, 6m
Unit Pipe Length3 meter, 6 meter
FeaturesPolished, Pickled, Anealed, Cold Drawn
Steel GradeALLOY STEEL 4130
Material Grade4130 GRADES
BrandHEUBACH
Unit Length6 m, 12 m
Diameter (Inch)1/2 TO 20 INCH
ScheduleSchedule 10 through 160, STD, XS, XXS.
Thickness (Millimetre)1.5 MM TO 15 MM THIK
TypesRound
ColorBLACK
MaterialAISI 4130 GRADES
Size1/2 TO 20 INCH
Min Outer Dimensions15 NB
Max Outer Dimensions20 INCH
Surface FinishMill Finished
ShapeRound
Nominal Size1 inch, 3/4 inch, 2 inch, 1/2 inch, 3 inch, >3 inch,1/2 TO 20 INCH
Test CertificateYes
GradeASTM A 519/4130

Alloy steels are designated by AISI four-digit numbers. They are more responsive to mechanical and heat treatments than carbon steels. They comprise different types of steels with compositions which exceed the limitations of B, C, Mn, Mo, Ni, Si, Cr, and Va in the carbon steels.

AISI 4130 alloy steel contains chromium and molybdenum as strengthening agents. It has low carbon content, and hence it can be welded easily.

Chemical Composition

The chemical composition of AISI 4130 alloy steel is listed in the following table.

ElementContent (%)
Iron, Fe97.03-98.22
Chromium, Cr0.80-1.10
Manganese, Mn0.40-0.60
Carbon, C0.280-0.330
Silicon, Si0.15-0.30
Molybdenum, Mo0.15-0.25
Sulfur, S0.040
Phosphorous, P0.035
Physical Properties

The following table shows the physical properties of AISI 4130 alloy steel.

PropertiesMetricImperial
Density7.85 g/cm30.284 lb/in
Melting point1432 DegreeC2610 DegreeF
Mechanical Properties

The mechanical properties of AISI 4130 alloy steel are outlined in the following table.

PropertiesMetricImperial
Tensile strength, ultimate560 MPa81200 psi
Tensile strength, yield460 MPa66700 psi
Modulus of elasticity190-210 GPa27557-30458 ksi
Bulk modulus (Typical for steel)140 GPa20300 ksi
Shear modulus (Typical for steel)80 GPa11600 ksi
Poissons ratio0.27-0.300.27-0.30
Elongation at break (in 50 mm)21.50%21.50%
Reduction of area59.659.60%
Hardness, Brinell217217
Hardness, Knoop (Converted from Brinell hardness)240240
Hardness, Rockwell B (Converted from Brinell hardness)9595
Hardness, Rockwell C (Converted from Brinell hardness, value below normal HRC range, for comparison purposes only.)1717
Hardness, Vickers (Converted from Brinell hardness)228228
Machinability (Annealed and cold drawn. Based on 100% machinability for AISI 1212 steel.)7070
Thermal Properties

The thermal properties of AISI 4130 alloy steel are outlined in the following table.

PropertiesMetricImperial
Thermal conductivity (100 DegreeC)42.7 W/mK296 BTU in/hr.ft2. DegreeF
Other Designations

Other designations that are equivalent to AISI 4130 alloy steel include the following.

AMS 6348AMS 6371ASTM A331ASTM A829DIN 1.7218
AMS 6350AMS 6373ASTM A506MIL S-18729UNI 25 CrMo 4
AMS 6351AMS 6374ASTM A507MIL S-6758JIS SCCrM 1
AMS 6360AMS 6528ASTM A513SAE J1397JIS SCM 2
AMS 6361AMS 7496ASTM A519SAE J404SS 2225
AMS 6362ASTM A29ASTM A646SAE J412B.S. CDS 110
AMS 6370ASTM A322ASTM A752AFNOR 25 CD 4 (S)SAE J770
Request
Callback


Additional Information:

  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A,Other
  • Port of Dispatch: MUMBAI NAHAVA SHEVA
  • Production Capacity: 240000
  • Delivery Time: 2 DAYS
  • Packaging Details: STANDARD
Yes! I am Interested
View PDF

AISI 4130 Seamless Tubes

AISI 4130 Seamless  Tubes
  • AISI 4130 Seamless  Tubes
  • AISI 4130 Seamless  Tubes
  • AISI 4130 Seamless  Tubes
  • AISI 4130 Seamless  Tubes
Get Best Quote
Approx. Price: Rs 500 / MeterGet Latest Price

Product Details:

Minimum Order Quantity20 Meter
ShapeRound
Outer Diameter1/2 TO 36 INCH
Unit Pipe Length6 meter, 3 meter
EndPLAIN
GradeASTM A 519/4130
Unit Length6m, 3m
Length3m, 6m
FeaturesPickled, Anealed, Polished, Cold Drawn
Size1 inch-2 inch, 3 inch-10 inch, 1/4 inch-1 inch, 10 inch-20 inch, 2 inch-3 inch
Steel GradeALLOY STEEL 4130
Surface FinishMill Finished
ScheduleSchedule 10 through 160, STD, XS, XXS.
Diameter (Millimeter)1/2 TO 36 INCH
Thickness (Millimetre)Schedule 10 through 160, STD, XS, XXS.
TypesRound
ColorBLACK
BrandHEUBACH
Min Outer Dimensions15 MM OD
Max Outer Dimensions915 MM OD
MaterialALLOY STEEL
Nominal Size1 inch, 3 inch, 1/2 inch, 2 inch, 3/4 inch
Thickness1.5 TO 10 MM THIK

4130 PIPESeamless Pipe is tubing made to the pipe schedule. Alloy pipe in the power industry generally refers to an A335 material, but in the oil and gas market, 4130 pipes are used. This product is made to the pipe schedule but uses A519-4130 as the controlling seamless specification. The material is then heat treated to L80, P110 or the customer's specified properties. This material is easily welded and is generally used for above ground applications and utilizes the fittings, flanges and other piping components with the same 4130 chemistry. This product is a good alternative to replace X65 through X80 piping items where the usage or repair is too small for mill production.American Piping

Products Inc. 4130 pipe:
  • A519-4130
  • L80 and P110 heat-treated mechanicals
  • NPS 2" to 12"
  • Schedules 120 through XXH
  • Non-Scheduled walls through 1.5"
  • We cater to the needs of all industry believe in quality material.
  • ASTM A 519 4130 PIPES
  • ASTM A 519 4130 SEAMLESS PIPES
  • ASTM A 519 4130 HOT ROLLED PIPE
  • ASTM A 519 4130 COLD DRAWN PIPE
  • ASTM A 519 4140 PIPES
  • ASTM A 519 4140 SEAMLESS PIPES
  • ASTM A 519 4140 HOT ROLLED PIPE
  • ASTM A 519 4140 COLD DRAWN PIPE
  • ASTM A 519 4130 HIGH TENSILE PIPE
  • ASTM A 519 4140 HIGH TENSILE PIPE
  • HIGH TENSILE ASTM A 519 PIPES
  • ASTM A 519 SEAMLESS PIPE
  • ASTM 519 SEAMLESS PIPES
  • HIGH TENSILE SEAMLESS PIPES
  • HIGH PRESSURE 4130 PIPES
  • SAE 4130 PIPES
  • AISI 4130 PIPES
  • HOT ROLLED ASTM A 519 PIPES
  • COLD DRAWN SEAMLESS 4130 PIPES
  • SEAMLESS 519 PIPES
  • 4130 SEAMLESS PIPES
  • HEAVY THICKNESS SEAMLESS 4130 PIPES
  • ASTM A 519 4130 SEAMLESS PIPES
  • ASTM A 519 SEAMLESS PIPE
  • ASTM A519 4130 SEAMLESS PIPES
  • Application Of 4130 Pipes
  • 4130 Properties
  • 4130 Normalize Annealed
  • 4130 Heat Treated
  • Aisi 4130 Normalized Properties
  • ROUND BAR AISI 4130
  • Aisi 4130 Round Bar Properties
  • ALLOY STEEL SHEET PLATE
  • Sae Round Bar
  • ALLOY STEEL OTHER SPECIFICATIONS
  • ASTM A519 Chemical Physical
  • ASTM A519-89ASME SA519
  • AISI 4140 PROPERTIES
  • 4140 STEEL PLATE
  • 4140
  • AISI 4140 Specification
  • AISI 4140 Properties
  • 41XX SERIES Chemical Properties
  • 41XX SERIES Mechanical Properties
  • 41XX SERIES STEEL
  • ASTM A 519 4130 PIPES
  • ASTM A519 4130 PIPE

Mechanical Properties:
  • Yield Strength: >700Mpa
  • Ultimate Tensile Strength: >750Mpa
  • Elongation %: Around 16%
  • Chemical Properties:
  • Carbon %: 0.295
  • Silicon %: 0.228
  • Manganese %: 0.581
  • Phosphorous %: 0.019
  • Sulfur %: 0.018
  • Chromium %: 0.874
  • Molybdenum %: 0.160

Application Of 4130 4140 Pipe Pipe Fittings:

  • Uses of 4130 Alloy
  • This alloy is used for manufacturing ball and roller bearings.
  • This alloy is also good for manufacturing gears due to their heat treatment property.
  • It is used for rock-crushing machinery and automotive parts.
  • It is used for manufacturing structural parts of aircraft.
  • The main use of this alloy is in the field of resistance welding.
  • It is used for cutter tools such as drills, taps, milling cutters, etc.

Summary
  • 4130 steel alloy is famous for its strength property when it is used for heat treatment. The importance of this steel is in aircraft manufacturing companies and welding purpose. It has features of both chromium and molybdenum steel alloys.
  • Perforating guns
  • Sand Screens
  • Downhole drill motors
Request
Callback


Additional Information:

  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A
  • Port of Dispatch: MUMBAI
  • Production Capacity: 50000
  • Delivery Time: 2 WEEKS
  • Packaging Details: STANDARD
Yes! I am Interested
View PDF

AISI 4130 Alloy Steel Tube

AISI 4130 Alloy Steel Tube
  • AISI 4130 Alloy Steel Tube
Get Best Quote
Approx. Price: Rs 400 / MeterGet Latest Price

Product Details:

Minimum Order Quantity50 Meter
Steel Grade4130
ShapeRound
Outer Diameter1/2 TO 36 INCH
EndPLAIN
Silicon Si0.15 - 0.30 %
Unit Length3m, 6m
Unit Pipe Length3 meter, 6 meter
Length6m, 3m
FeaturesCold Drawn, Anealed
Manganese Mn0.40- 0.60 %
Chromium Cr0.80 -1.10 %
ScheduleSchedule 10 through 160, STD, XS, XXS.
Diameter (Inch)1/2 TO 36
StandardDIN, API, BS, ASTM
Size1/2 TO 36
Thickness (Millimetre)1.6-3 mm
BrandHEUBACH
TypesRound
Min Outer Dimensions6 MM OD
Max Outer Dimensions915 MM OD
Nominal Size1/2 inch, 3 inch, 1 inch, 2 inch, 3/4 inch
MaterialALLOY STEEL
ColorBlack
Iron Fe97.03 -98.22 %
GradeASTM A 519/4130
Diameter25.40-31.75mm
Carbon C0.280 - 0.330 %
Molybdenum Mo0.15 - 0.25 %
Sulfur S0.04 %
Phosphorous P0.035 %

AISI/SAE 4130 grade is a versatile alloy with good atmospheric corrosion resistance and reasonable strength up to around 600 F (315 C). It shows good overall combinations of strength, toughness. and fatigue strength. This low-alloy steel finds many applications as forgings in the aerospace and oil and gas industries - as forged valve bodies and pumps, as well as in the automotive, agricultural and defense industries.

Fabrication and Heat Treatment
Machinability
  • AISI 4130 steel can be easily machined using conventional methods. However, machining becomes difficult when the hardness of the steel is increased.

Forming
  • Forming of AISI 4130 steel can be performed in the annealed condition.

Welding

  • Welding of AISI 4130 steel can be performed by all commercial methods.
Heat Treatment
  • AISI 4130 steel is heated at 871 DegreeC (1600 DegreeF) and then quenched in oil. This steel is usually heat-treated at temperatures ranging from 899 to 927 DegreeC (1650 to 1700 DegreeF).

Forging

  • Forging of AISI 4130 steel can be performed can be performed at 954 to 1204 DegreeC (1750 to 2200 DegreeF).

Hot Working

  • Hot working of AISI 4130 steel can be done at 816 to 1093 DegreeC (1500 to 2000 DegreeF).

Cold Working

  • AISI 4130 steel can be cold worked using conventional methods.

Annealing

  • AISI 4130 steel can be annealed at 843 DegreeC (1550 DegreeF) followed by air cooling at 482 DegreeC (900 DegreeF).

Tempering

  • Tempering of AISI 4130 steel can be performed at 399 to 566 DegreeC (750 to 1050 DegreeF), depending on the desired strength level.

Hardening

  • Hardening of AISI 4130 steel can be done with cold working or heat treatment.

Specifications

The following specifications cover Alloy Steels 4130
  • AISI 4130
  • AMS 6348
  • AMS 6350
  • AMS 6351
  • AMS 6360
  • AMS 6361
  • AMS 6362
  • AMS 6370
  • AMS 6371
  • AMS 6373
  • AMS 6374
  • AMS 6528
  • AMS 7496
  • ASTM A108
  • ASTM A29
  • ASTM A322
  • ASTM A331
  • ASTM A506
  • ASTM A507
  • ASTM A513
  • ASTM A519
  • ASTM A646
  • ASTM A752
  • ASTM A829
  • MIL S-18729
  • MIL S-6758
  • SAE J1397
  • SAE J404
  • SAE J412
  • UNS G41300

Packing
  • Plastic plugs in both ends, bundles of max. 3,000kg with several steel strips, Two tags on each bundle, Wrapped in waterproof paper and sackcloth with several steel strips

Delivery Condition

  • Annealed (A), Bright Annealing, Normalized (N), Stress Relief Or Finish Anneal (SR), Quenched and Tempered (Q+T), etc.

Marking

  • All tubes are eddy current tested and are marked with size, cast number and specification. Or as per customer's requirement.
Request
Callback


Additional Information:

  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A,Other
  • Port of Dispatch: MUMBAI
  • Production Capacity: 180000
  • Delivery Time: 2 WEEKS
  • Packaging Details: STANDARD
Yes! I am Interested
View PDF

AISI 4130 Seamless Pipes

AISI 4130 Seamless Pipes
  • AISI 4130 Seamless Pipes
Get Best Quote
Approx. Price: Rs 500 / MeterGet Latest Price

Product Details:

Minimum Order Quantity30 Meter
Unit Pipe Length3 meter, 6 meter
Unit Length12 m, 6 m
Steel GradeAISI 4130 GRADES
Surface FinishMill Finished
Diameter (Millimetre)15 MM OD
Diameter (Millimeter)1/2 TO 36
Pipe FluidWater, Chemical, Gas
Material GradeAISI 4130 GRADES
ShapeRound
Origin Of CountryINDIA
Packing TypeSTANDARD
Thickness (Millimeter)1.5 MM TO 10 MM
Pipe Fluid TypeSteam, Chemical, Water
ColorBLACK
Size (inch)1/2 TO 36
Min Outer Dimensions15 MM OD
Min Wall ThicknessSchedule 10 through 160, STD, XS, XXS.
Size4 inch, >4,1/2 TO 36, 1/2 inch, 3 inch, 1 inch, 2 inch
ISO CertifiedISO Certified
CustomizedCustomized
MaterialALLOY STEEL
Length3m, 6m
Nominal Size2'', 1/2 TO 36, 1'', 1/2'', 3/4'', 1.50''
BrandHEUBACH
Carbon0.28 - 0.33 %
Sulphur0.04 % max
Diameter25.40-31.75mm
Thickness1.6-3 mm
GradeASTM A 519/4130
Chromium0.8 - 1.1 %
Manganese0.7 - 0.9 %
Molybdenum0.15 - 0.25 %
Phosphorus0.035 % max
Silicon0.15 - 0.35 %

We have carved a niche in the market as the Manufacturer & Supplier of AISI 1018 & 1020 Steel & 4130 Pipes from MUMBAI, India. The Steel Pipes we offer are fabricated using genuinely tested materials and always offered with a Test Certificate. Our AISI 1018 & 1020 & 4130 Steel Pipes are used by engineering students for various projects like BAJA, SUPRA, FSAE, ECOKART, etc. We ensure timely delivery across the country.

Applications
  • Typical applications for 4130 low alloy steel include. structural use such as aircraft engine mounts and welded tubing applications.
  • Aerospace, oil & gas industries - as forged valve bodies and pumps, automotive, agricultural and defense industries.

Machinability
  • This alloy is readily machined by conventional methods. Machinability is best with the alloy in the normalized and tempered condition. Although the alloy may be machined in the fully heat treated condition, machinability becomes more difficult with increasing strength (hardness) of the alloy.

Forming
  • Formability is best in the annealed condition for which the ductility is very good, Bend radii of 1t on annealed sheet material may be made.

Welding

  • 4130 alloy is noted for its weldability by all of the commercial methods.

Designations
  • France AFNOR 25 CD 4 (S)
  • Germany DIN 1.7218
  • Italy UNI 25 CrMo 4, UNI 25 CrMo 4 KB
  • Japan JIS SCCrM 1, JIS SCM 2
  • Sweden SS 2225
  • United Kingdom B.S. CDS 110
  • United States AMS 6350 , AMS 6350D , AMS 6351A , AMS 6356 , AMS 6360 , AMS 6360F , AMS 6361 , AMS 6362 , AMS 6370 , AMS 6370F , AMS 6371 ,

We wish to introduce ourselves as importers & stockists of Stainless Steel & Nickel Alloys likeHastealloy C-276, Hastealloy C-22, Inconel 600, Incolloy 825, Inconel 625, Nickel 200 / 201, Monel 400, Incolloy 800etc.& Titanium.

We also import stock & supplyS.S. 904L,in sheets / plates, pipes, pipe-fittings & bars.Apart from the above, we also import, stock & supply Stainless Steel in sheet/plate, Pipe, tube & pipe-fittings etc. We can also import & supply to your specific requirements in all the above items from ready stocks of various mills.

We have an extensive network of suppliers for instant delivery of difficult to find items, in case materials are out of stock. We are preferred suppliers for many large companies in the public & private sectors. We have executed some jobs with stringent quality requirements for the atomic & nuclear energy departments of the government either directly or through theirvendors.

ONE STOP SOURCE FOR STAINLESS STEEL,

DUPLEX STEEL& CARBON STEEL PRODUCT


MANUFACTURERSEXPOTERS & STOCKIESTOF

ERW PIPES- 1/2" - 24" - SCH 10, SCH 20, SCH 40, SCH 80, SCH 160

PIPE FITTINGS- ELBOW, REDUCER, TEE, STUB END ETC

FLANGES- SORF, BLRF, WNRF, SWRF & LAPJOINT

IBR PIPE, PIPE FITTINGS & FLANGES.


IMPORTERS, EXPOTERS & STOCKIESTOF PLATES


STAINLESS STEEL 304L,316L,317L,310S,309S, 314, 253MA,

DUPLEX STEEL 2205/31803/1.4462,

SUPER DUPLEX 2507, SMO254, 904L

BOILER QUALITY ASTM A516 GRADE 60/70

HARDOX 400 & 500

Request
Callback


Additional Information:

  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A,Other
  • Port of Dispatch: MUMBAI NAHAVA SHEVA
  • Production Capacity: 220000
  • Delivery Time: 6 WEEKS
  • Packaging Details: STANDARD
Yes! I am Interested
View PDF

Chrome Moly Alloy Steel Pipes

Chrome Moly Alloy Steel Pipes
  • Chrome Moly Alloy Steel Pipes
Get Best Quote
Approx. Price: Rs 500 / MeterGet Latest Price

Product Details:

Minimum Order Quantity50 Meter
ShapeRound
Specific Heat0.114 (Btu/lb/Deg F - [32-212 Deg F])
Chromium0.8 - 1.1
Manganese0.7 - 0.9
Molybdenum0.15 - 0.25
Phosphorus0.035 max
Diameter25.40-31.75mm
Thickness1.6-3 mm
GradeASTM A 519/4130
Silicon0.15 - 0.35
Sulphur0.04 max
Density0.283 (lb / cu. in.)
Specific Gravity7.8
Melting Point Deg F2610
Thermal Conductivity22.3
Mean Coeff Thermal Expansion7
Modulus of Elasticity Tension29

We have carved a niche in the market as the Manufacturer & Supplier of AISI 1018 & 1020 Steel & 4130 Pipes from MUMBAI, India. The Steel Pipes we offer are fabricated using genuinely tested materials and always offered with a Test Certificate. Our AISI 1018 & 1020 & 4130 Steel Pipes are used by engineering students for various projects like BAJA, SUPRA, FSAE, ECOKART, etc. We ensure timely delivery across the country.

Features:
  • AISI 4130 is a low alloy steel containing molybdenum and chromium as strengthening agents. The carbon content is nominally 0.30% and with this relatively low carbon content, the alloy is excellent from the fusion weld-ability standpoint. The alloy can be hardened by heat treatment.

Applications:

  • Typical applications for 4130 low alloy steel include. structural use such as aircraft engine mounts and welded tubing applications.
Request
Callback


Additional Information:

  • Port of Dispatch: MUMBAI NAHAVA SHEVA
  • Production Capacity: 220000
  • Delivery Time: 4 WEEKS
  • Packaging Details: STANDARD
Yes! I am Interested
View PDF

AISI 4130 Tubes

AISI 4130 Tubes
  • AISI 4130 Tubes
Get Best Quote
Approx. Price: Rs 750 / MeterGet Latest Price

Product Details:

Minimum Order Quantity10 Meter
Outer Diameter1/2 TO 20 INCH
Steel Grade4130 GRADES
EndPLAIN
Unit Pipe Length6 meter, 3 meter
Silicon Si0.15 -0.30 %
Unit Length6m, 3m
Thickness (mm)1.5 MM TO 10 MM
FeaturesCold Drawn, Anealed, Pickled
Manganese Mn0.40 - 0.60 %
Chromium Cr0.80 -1.10 %
ScheduleSchedule 10 through 160, STD, XS, XXS.
StandardBS, ASTM, API, DIN
Size1/2 TO 10 INCH
BrandHEUBACH
Shape Round
ColorBlack
MaterialALLOY STEEL
Iron Fe97.03 -98.22 %
Phosphorous P0.035 %
Diameter25.40-31.75mm
Thickness1.6-3 mm
GradeASTM A 519/4130
Carbon C0.280- 0.330 %
Molybdenum Mo0.15- 0.25 %
Sulfur S0.04 %

Alloy steels are designated by AISI four-digit numbers. They are more responsive to mechanical and heat treatments than carbon steels. They comprise different types of steels with compositions which exceed the limitations of B, C, Mn, Mo, Ni, Si, Cr, and Va in the carbon steels.

AISI 4130 alloy steel contains chromium and molybdenum as strengthening agents. It has low carbon content, and hence it can be welded easily. The datasheet given below provides more details about AISI 4130 alloy steel.

We have carved a niche in the market as the Manufacturer & Supplier of AISI 1018 & 1020 Steel & 4130 Pipes from MUMBAI, India.

Physical Properties
The following table shows the physical properties of AISI 4130 alloy steel.
PropertiesMetricImperial
Density7.85 g/cm30.284 lb/in
Melting point1432 DegreeC2610 DegreeF

Mechanical Properties
The mechanical properties of AISI 4130 alloy steel are outlined in the following table.

PropertiesMetricImperial
Tensile strength, ultimate560 MPa81200 psi
Tensile strength, yield460 MPa66700 psi
Modulus of elasticity190-210 GPa27557-30458 ksi
Bulk modulus (Typical for steel)140 GPa20300 ksi
Shear modulus (Typical for steel)80 GPa11600 ksi
Poissons ratio0.27-0.300.27-0.30
Elongation at break (in 50 mm)0.2150.215
Reduction of area59.60.596
Hardness, Brinell217217
Hardness, Knoop (Converted from Brinell hardness)240240
Hardness, Rockwell B (Converted from Brinell hardness)9595
Hardness, Rockwell C (Converted from Brinell hardness, a value below normal HRC range, for comparison purposes only.)1717
Hardness, Vickers (Converted from Brinell hardness)228228
Machinability (Annealed and cold drawn. Based on 100% machinability for AISI 1212 steel.)7070

Other Designations

Other designations that are equivalent to AISI 4130 alloy steel include the following.

AMS 6348AMS 6371ASTM A331ASTM A829DIN 1.7218
AMS 6350AMS 6373ASTM A506MIL S-18729UNI 25 CrMo 4
AMS 6351AMS 6374ASTM A507MIL S-6758JIS SCCrM 1
AMS 6360AMS 6528ASTM A513SAE J1397JIS SCM 2
AMS 6361AMS 7496ASTM A519SAE J404SS 2225
AMS 6362ASTM A29ASTM A646SAE J412B.S. CDS 110
AMS 6370ASTM A322ASTM A752AFNOR 25 CD 4 (S)SAE J770
Request
Callback


Additional Information:

  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A
  • Port of Dispatch: MUMBAI NAHAVA SHEVA
  • Production Capacity: 180000
  • Delivery Time: 4 WEEKS
  • Packaging Details: STANDARD
Yes! I am Interested
View PDF

Round 4130 Alloy Steel Pipes

Round 4130 Alloy Steel Pipes
  • Round 4130 Alloy Steel Pipes
  • Round 4130 Alloy Steel Pipes
  • Round 4130 Alloy Steel Pipes
  • Round 4130 Alloy Steel Pipes
  • Round 4130 Alloy Steel Pipes
  • Round 4130 Alloy Steel Pipes
Get Best Quote
Approx. Price: Rs 400 / MeterGet Latest Price

Product Details:

Minimum Order Quantity50 Meter
Outer Diameter1/2 TO 36 INCH
EndPLAIN
Unit Pipe Length6 meter, 3 meter
Length6m, 3m
FeaturesPickled, Polished, Cold Drawn, Anealed
Steel GradeALLOY STEEL 4130
BrandHEUBACH
Diameter (Inch)1/2 TO 36
ScheduleSchedule 10 through 160, STD, XS, XXS.
Thickness (Millimetre)Schedule 10 through 160, STD, XS, XXS.
TypesRound
Pipe Fluid TypeWater, Chemical, Steam
ColorBlack
MaterialAISI 4130
Min Wall ThicknessSchedule 10 through 160, STD, XS, XXS.
Sulfur S0.04 %
Iron Fe97.03 -98.22 %
ISO CertifiedISO Certified
Size1/2 TO 36 INCH
ShapeRound
Nominal Size1/2 TO 36 INCH
Thickness1.6-3 mm
Test CertificateYes
Chromium Cr0.80 - 1.10 %
Manganese Mn0.40 - 0.60 %
Carbon C0.280 - 0.330 %
Silicon Si0.15 - 0.30 %
Molybdenum Mo0.15 - 0.25 %
Diameter25.40-31.75mm
GradeASTM A 519/4130
Phosphorou P0.035 %

We are one of the leading manufacturers & suppliers quality range of AISI 4130 Pipes. We offer this steel in different sizes and specifications as per the needs of our clients. The offered steel is manufactured using superior quality raw material and advanced technology by our adroit professionals. Our provided steel is checked on various parameters in order to ensure its flawlessness. Besides, clients can avail this steel from us at nominal prices.

Applications
  • Automotive Rollcage, Chasis, and Other Parts
  • Hydraulic Equipment
  • Engineering Machinery
  • Agricultural Machinery

Chemical Composition

The chemical composition ofAISI 4130 alloy steelis listed in the following table.

ElementContent (%)
Iron, Fe97.03-98.22
Chromium, Cr0.80-1.10
Manganese, Mn0.40-0.60
Carbon, C0.280-0.330
Silicon, Si0.15-0.30
Molybdenum, Mo0.15-0.25
Sulfur, S0.040
Phosphorous, P0.035

Physical Properties

The following table shows the physical properties ofAISI 4130 alloy steel.

We wish to introduce ourselves as importers & stockists of Stainless Steel & Nickel Alloys likeHastealloy C-276, Hastealloy C-22, Inconel 600, Incolloy 825, Inconel 625, Nickel 200 / 201, Monel 400, Incolloy 800etc.& Titanium. We maintain stocks of sizeable quantities in these alloys.

We also import stock & supplyS.S. 904L,in sheets / plates, pipes, pipe-fittings & bars.Apart from the above, we also import, stock & supply Stainless Steel in sheet/plate, Pipe, tube & pipe-fittings etc. We can also import & supply to your specific requirements in all the above items from ready stocks of various mills.

We have an extensive network of suppliers for instant delivery of difficult to find items, in case materials are out of stock. We are preferred suppliers for many large companies in the public & private sectors. We have executed some jobs with stringent quality requirements for the atomic & nuclear energy departments of the government either directly or through theirvendors.

We request you toregisterour name in your approved list of suppliers.

We assure you of our best services & look forward to a long & mutually beneficial business relationship with you.



ONE STOP SOURCE FOR STAINLESS STEEL,

DUPLEX STEEL& CARBON STEEL PRODUCT


MANUFACTURERSEXPOTERS & STOCKIESTOF

ERW PIPES- 1/2" - 24" - SCH 10, SCH 20, SCH 40, SCH 80, SCH 160

PIPE FITTINGS- ELBOW, REDUCER, TEE, STUB END ETC

FLANGES- SORF, BLRF, WNRF, SWRF & LAPJOINT

IBR PIPE, PIPE FITTINGS & FLANGES.


IMPORTERS, EXPOTERS & STOCKIESTOF PLATES


STAINLESS STEEL 304L,316L,317L,310S,309S, 314, 253MA,

DUPLEX STEEL 2205/31803/1.4462,

SUPER DUPLEX 2507, SMO254, 904L

BOILER QUALITY ASTM A516 GRADE 60/70

HARDOX 400 & 500



Request
Callback


Additional Information:

  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A,Other
  • Port of Dispatch: MUMBAI NAHAVA SHEVA
  • Production Capacity: 240000
  • Delivery Time: 2 DAYS
  • Packaging Details: STANDARD
Yes! I am Interested
View PDF

ASTM A519 AISI 4130 Pipes

ASTM A519 AISI 4130 Pipes
  • ASTM A519 AISI 4130 Pipes
Get Best Quote
Approx. Price: Rs 500 / MeterGet Latest Price

Product Details:

Minimum Order Quantity30 Meter
Outer Diameter1/2 TO 36 INCH
EndPLAIN
Unit Pipe Length6 meter, 3 meter
Length3m, 6m
Steel GradeAISI 4130 GRADES
Surface FinishMill Finished
Molybdenum0.15 - 0.25 %
Diameter (Inch)1/2 TO 36
ScheduleSchedule 10 through 160, STD, XS, XXS.
StandardASTM, JIS, BS
Phosphorus0.035 % max
Material GradeASTM A 519 GRADES
Thickness (Millimetre)1.6-3 mm
Place Of OriginINDIAN
Silicon0.15 - 0.35 %
Chromium0.8 - 1.1 %
Manganese0.7 - 0.9 %
TypesRound
BrandHEUBACH
MaterialAlloy Steel
Min Outer Dimensions15 NB
ApplicationCAR MAKING
ColorBlack
Max Outer Dimensions915 MM OD
Size15 MM TO 915 MM
Thickness (mm)Schedule 10 through 160, STD, XS, XXS.
Shape Round
Carbon0.28 - 0.33 %
Unit Length6m, 3m
Nominal Size3 inch, >3 inch, 2 inch, 3/4 inch, 1/2 inch, 1 inch
Sulfur0.04 % max
GradeASTM A 519/4130
Diameter25.40-31.75mm

We wish to introduce ourselves as importers & stockists of Stainless Steel & Nickel Alloys likeHastealloy C-276, Hastealloy C-22, Inconel 600, Incolloy 825, Inconel 625, Nickel 200 / 201, Monel 400, Incolloy 800etc.& Titanium. We are Exporters & Distributors Nickel Alloys. We maintain stocks of sizeable quantities in these alloys.

We also import stock & supplyS.S. 904L,in sheets / plates, pipes, pipe-fittings & bars.Apart from the above, we also import, stock & supply Stainless Steel in sheet/plate, Pipe, tube & pipe-fittings etc. We can also import & supply to your specific requirements in all the above items from ready stocks of various mills.

We have an extensive network of suppliers for instant delivery of difficult to find items, in case materials are out of stock. We are preferred suppliers for many large companies in the public & private sectors. We have executed some jobs with stringent quality requirements for the atomic & nuclear energy departments of the government either directly or through theirvendors.

ONE STOP SOURCE FOR STAINLESS STEEL,

DUPLEX STEEL& CARBON STEEL PRODUCT

MANUFACTURERSEXPOTERS & STOCKIESTOF

ERW PIPES- 1/2" - 24" - SCH 10, SCH 20, SCH 40, SCH 80, SCH 160

PIPE FITTINGS- ELBOW, REDUCER, TEE, STUB END ETC

FLANGES- SORF, BLRF, WNRF, SWRF & LAPJOINT

IBR PIPE, PIPE FITTINGS & FLANGES.


IMPORTERS, EXPOTERS & STOCKIESTOF PLATES


STAINLESS STEEL 304L,316L,317L,310S,309S, 314, 253MA,

DUPLEX STEEL 2205/31803/1.4462,

SUPER DUPLEX 2507, SMO254, 904L

BOILER QUALITY ASTM A516 GRADE 60/70

HARDOX 400 & 500




We have carved a niche in the market as the Manufacturer & Supplier of AISI 1018 & 1020 Steel & 4130 Pipes from MUMBAI, India. The Steel Pipes we offer are fabricated using genuinely tested materials and always offered with a Test Certificate. Our AISI 1018 & 1020 & 4130 Steel Pipes are used by engineering students for various projects like BAJA, SUPRA, FSAE, ECOKART, etc. We ensure timely delivery across the country.

Applications
  • Typical applications for 4130 low alloy steel include. structural use such as aircraft engine mounts and welded tubing applications.

Machinability
  • This alloy is readily machined by conventional methods. Machinability is best with the alloy in the normalized and tempered condition. Although the alloy may be machined in the fully heat treated condition, machinability becomes more difficult with increasing strength (hardness) of the alloy.

Welding
  • 4130 alloy is noted for its weld-ability by all of the commercial methods.

Specifications

    StandardAlloy Steel
    AISI 4130 Alloy SteelUNS G41300
    AISI 4340 Alloy SteelUNS G43400
    AISI 4140 Alloy SteelUNS G41400
    AISI 8620 Alloy SteelUNS G86200
    Request
    Callback


    Additional Information:

    • Item Code: 4130
    • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A,Other
    • Port of Dispatch: MUMBAI
    • Production Capacity: 180000
    • Delivery Time: 4 WEEKS
    • Packaging Details: STANDARD
    Yes! I am Interested
    View PDF

    ASTM A519 Grade 4130 Seamless Pipes

    ASTM A519 Grade  4130 Seamless Pipes
    • ASTM A519 Grade  4130 Seamless Pipes
    Get Best Quote
    Approx. Price: Rs 500 / MeterGet Latest Price

    Product Details:

    Minimum Order Quantity50 Meter
    Carbon0.28 - 0.33 %
    GradeASTM A 519/4130
    Manganese0.40 - 0.60 % max
    Phosphorus0.035 % max
    Sulfur0.040 % max
    Silicon0.20 - 0.35 %
    Chromium0.80 -1.10 %
    Molybdenum0.15 -0.25 %
    Diameter25.40-31.75mm
    Thickness1.6-3 mm

    AISI or SAE 4130 grade is a low-alloy steel containing chromium and molybdenum as strengthening agents. The steel has good strength and toughness, weldability and machinability. The alloy is readily machinable. Simple shapes might be machined following a normalizing treatment, whereas more complex shapes will require annealing. For optimum machinability, a coarse pearlitic structure with minimum ferrite is normally recommended.

    AISI/SAE 4130 grade is a versatile alloy with good atmospheric corrosion resistance and reasonable strength up to around 600º F (315º C). It shows good overall combinations of strength, toughness. and fatigue strength.

    Other Details:
    • Category: Steel
    • Class: Alloy steel
    • Type: Standard
    • Common Names: Chromium-molybdenum steel

    Designations:
    • France: AFNOR 25 CD 4 (S)
    • Germany: DIN 1.7218
    • Italy: UNI 25 CrMo 4 , UNI 25 CrMo 4 KB
    • Japan: JIS SCCrM 1 , JIS SCM 2
    • Sweden: SS 2225
    • United Kingdom: B.S. CDS 110
    • United States: AMS 6350 , AMS 6350D , AMS 6351A , AMS 6356 , AMS 6360 , AMS 6360F , AMS 6361 , AMS 6362 , AMS 6370 , AMS 6370F , AMS 6371 , AMS 6371D , AMS 6373 , AMS 6373A , ASTM A322 , ASTM A331 , ASTM A505 , ASTM A513 , ASTM A519 , ASTM A646 , MIL SPEC MIL-S-16974 , SAE J404 , SAE J412 , SAE J770 , UNS G41300


    Applications:
    • This low-alloy steel finds many applications as forgings in the aerospace and oil and gas industries – as forged valve bodies and pumps, as well as in the automotive, agricultural and defense industries

    Mechanical Properties:
    PropertiesConditions
    T (°C)Treatment
    Density (×1000 kg/m3)7.7-8.0325-
    Poisson's Ratio0.27-0.3025-
    Elastic Modulus (GPa)190-21025-
    Tensile Strength (Mpa)560.525annealed at 865°C more
    Yield Strength (Mpa)360.6
    Elongation (%)28.2
    Reduction in Area (%)55.6
    Hardness (HB)15625annealed at 865°C more
    Impact Strength (J)61.725annealed at 865°C more
    (Izod)
    Request
    Callback


    Additional Information:

    • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A,Other
    • Port of Dispatch: MUMBAI NAHAVA SHEVA
    • Production Capacity: 220000
    • Delivery Time: 4 WEEKS
    • Packaging Details: STANDARD
    Yes! I am Interested
    View PDF

    4130 Tubes

    4130 Tubes
    • 4130 Tubes
    Get Best Quote
    Approx. Price: Rs 400 / MeterGet Latest Price

    Product Details:

    Minimum Order Quantity100 Meter
    Outer Diameter1/2 TO 36 INCH
    EndPLAIN
    Unit Pipe Length6 meter, 3 meter
    Unit Length6m, 3m
    Length3m, 6m
    FeaturesCold Drawn
    Thickness (mm)1.5 MM TO 50 MM
    Steel GradeALLOY STEEL
    ScheduleSchedule 10 through 160, STD, XS, XXS.
    StandardDIN, ASTM, API, BS
    Diameter (Inch)1/2 TO 36
    Thickness(mm)1.5 TO 50 MM
    ColorBlack
    Thickness (Millimetre)Schedule 10 through 160, STD, XS, XXS.
    TypesRound
    Diameter (Millimetre)25.40-31.75mm
    ShapeRound
    GradeASTM A 519/4130
    Min Outer Dimensions15 NB
    Max Outer Dimensions915 MM OD
    Nominal Size>3 inch, 1/2 inch, 3 inch, 1 inch, 3/4 inch, 2 inch
    BrandHeubach
    MaterialALLOY STEEL

    We wish to introduce ourselves as importers & stockists of Stainless Steel & Nickel Alloys likeHastealloy C-276, Hastealloy C-22, Inconel 600, Incolloy 825, Inconel 625, Nickel 200 / 201, Monel 400, Incolloy 800etc.& Titanium. We are Exporters,stockists & suppliers of Nickel Alloys.


    all the above items from ready stocks of various mills.


    ONE STOP SOURCE FOR STAINLESS STEEL,

    DUPLEX STEEL& CARBON STEEL PRODUCT


    MANUFACTURERSEXPOTERS & STOCKIESTOF

    ERW PIPES- 1/2" - 24" - SCH 10, SCH 20, SCH 40, SCH 80, SCH 160

    PIPE FITTINGS- ELBOW, REDUCER, TEE, STUB END ETC

    FLANGES- SORF, BLRF, WNRF, SWRF & LAPJOINT

    IBR PIPE, PIPE FITTINGS & FLANGES.


    IMPORTERS, EXPOTERS & STOCKIESTOF PLATES


    STAINLESS STEEL 304L,316L,317L,310S,309S, 314, 253MA,

    DUPLEX STEEL 2205/31803/1.4462,

    SUPER DUPLEX 2507, SMO254, 904L

    BOILER QUALITY ASTM A516 GRADE 60/70

    HARDOX 400 & 500


    Mechanical Properties
    PropertiesMetricImperial
    Tensile strength, ultimate560 MPa81200 psi
    Tensile strength, yield460 MPa66700 psi
    Modulus of elasticity190-210 GPa27557-30458 ksi
    Bulk modulus (Typical for steel)140 GPa20300 ksi
    Shear modulus (Typical for steel)80 GPa11600 ksi
    Poissons ratio0.27-0.300.27-0.30
    Elongation at break (in 50 mm)0.2150.215
    Reduction of area59.60.596
    Hardness, Brinell217217
    Hardness, Knoop (Converted from Brinell hardness)240240
    Hardness, Rockwell B (Converted from Brinell hardness)9595
    Hardness, Rockwell C (Converted from Brinell hardness, value below normal HRC range, for comparison purposes only.)1717
    Hardness, Vickers (Converted from Brinell hardness)228228
    Machinability (Annealed and cold drawn. Based on 100% machinability for AISI 1212 steel.)7070

    Thermal Properties
    PropertiesMetricImperial
    Thermal conductivity (100 DegreeC)42.7 W/mK296 BTU in/hr.ft2. DegreeF

    Other Designations
    AMS 6348AMS 6371ASTM A331ASTM A829DIN 1.7218
    AMS 6350AMS 6373ASTM A506MIL S-18729UNI 25 CrMo 4
    Request
    Callback


    Additional Information:

    • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A,Other
    • Port of Dispatch: MUMBAI NAHAVA SHEVA
    • Production Capacity: 220000
    • Delivery Time: 4 WEEKS
    • Packaging Details: STANDARD
    Yes! I am Interested
    View PDF

    A519 GRADE 4130 Seamless Tube

    A519 GRADE 4130 Seamless Tube
    • A519 GRADE 4130 Seamless Tube
    Get Best Quote
    Approx. Price: Rs 800 / MeterGet Latest Price

    Product Details:

    Minimum Order Quantity10 Meter
    Outer Diameter1/2 TO 36 INCH
    EndPLAIN
    Unit Pipe Length6 meter, 3 meter
    Length3m, 6m
    Unit Length3m, 6m
    FeaturesAnealed, Pickled, Cold Drawn, Polished
    Thickness (mm)1.5 MM TO 10 MM THIK
    Size1/2 TO 36 INCH
    Steel Grade4130
    StandardDIN, API, BS, ASTM
    ScheduleSchedule 10 through 160, STD, XS, XXS.
    Diameter (Inch)1/2 TO 36
    Thickness (Millimetre)Schedule 10 through 160, STD, XS, XXS.
    TypesRound
    Shape Round
    ColorBlack
    BrandHEUBACH
    Min Outer Dimensions15 NB
    Max Outer Dimensions915 MM OD
    MaterialALLOY STEEL
    Nominal Size1 inch, 1/2 inch, >3 inch,1/2 TO 36 INCH, 2 inch, 3 inch, 3/4 inch
    Iron Fe97.03 - 98.22 %
    Molybdenum Mo0.15 - 0.25 %
    Sulfur S0.04 %
    Phosphorous P0.035 %
    GradeASTM A 519/4130
    Thickness1.6-3 mm
    Diameter25.40 - 31.75mm
    Chromium Cr0.80 -1.10 %
    Manganese Mn0.40 -0.60 %
    Carbon C0.280 - 0.330 %
    Silicon Si0.15 - 0.30 %

    We have carved a niche in the market as the Manufacturer & Supplier of AISI 1018 & 1020 Steel & 4130 Pipes from MUMBAI, India.

    Physical Properties
    The following table shows the physical properties of AISI 4130 alloy steel.
    PropertiesMetricImperial
    Density7.85 g/cm30.284 lb/in
    Melting point1432 DegreeC2610 DegreeF

    Mechanical Properties
    The mechanical properties of AISI 4130 alloy steel are outlined in the following table.
    PropertiesMetricImperial
    Tensile strength, ultimate560 MPa81200 psi
    Tensile strength, yield460 MPa66700 psi
    Modulus of elasticity190-210 GPa27557-30458 ksi
    Bulk modulus (Typical for steel)140 GPa20300 ksi
    Shear modulus (Typical for steel)80 GPa11600 ksi
    Poissons ratio0.27-0.300.27-0.30
    Elongation at break (in 50 mm)0.2150.215
    Reduction of area59.60.596
    Hardness, Brinell217217
    Hardness, Knoop (Converted from Brinell hardness)240240
    Hardness, Rockwell B (Converted from Brinell hardness)9595
    Hardness, Rockwell C (Converted from Brinell hardness, a value below normal HRC range, for comparison purposes only.)1717
    Hardness, Vickers (Converted from Brinell hardness)228228
    Machinability (Annealed and cold drawn. Based on 100% machinability for AISI 1212 steel.)7070

    ONE STOP SOURCE FOR STAINLESS STEEL,

    DUPLEX STEEL& CARBON STEEL PRODUCT


    MANUFACTURERSEXPOTERS & STOCKIESTOF

    ERW PIPES- 1/2" - 24" - SCH 10, SCH 20, SCH 40, SCH 80, SCH 160

    PIPE FITTINGS- ELBOW, REDUCER, TEE, STUB END ETC

    FLANGES- SORF, BLRF, WNRF, SWRF & LAPJOINT

    IBR PIPE, PIPE FITTINGS & FLANGES.


    IMPORTERS, EXPOTERS & STOCKIESTOF PLATES


    STAINLESS STEEL 304L,316L,317L,310S,309S, 314, 253MA,

    DUPLEX STEEL 2205/31803/1.4462,

    SUPER DUPLEX 2507, SMO254, 904L

    BOILER QUALITY ASTM A516 GRADE 60/70


    Request
    Callback


    Additional Information:

    • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A,Other
    • Port of Dispatch: MUMBAI NAHAVA SHEVA
    • Production Capacity: 220000
    • Delivery Time: 4 WEEKS
    • Packaging Details: STANDARD
    Yes! I am Interested
    View PDF

    ASTM A519 Grade 4130 Seamless Alloy Steel Tube

    ASTM A519 Grade 4130 Seamless Alloy Steel Tube
    • ASTM A519 Grade 4130 Seamless Alloy Steel Tube
    Get Best Quote
    Approx. Price: Rs 800 / MeterGet Latest Price

    Product Details:

    Minimum Order Quantity10 Meter
    BrandHeubach
    Iron Fe97.03 - 98.22 %
    Molybdenum Mo0.15 - 0.25 %
    Sulfur S0.04 %
    Phosphorous P0.035 %
    GradeASTM A 519/4130
    Thickness1.6-3 mm
    Diameter25.40-31.75mm
    Chromium Cr0.80 -1.10 %
    Manganese Mn0.40 - 0.60 %
    Carbon C0.280 - 0.330 %
    Silicon Si0.15 -0.30 %

    Physical Properties:
    The following table shows the physical properties of AISI 4130 alloy steel.
    PropertiesMetricImperial
    Density7.85 g/cm30.284 lb/in³
    Melting point1432°C2610°F

    Mechanical Properties:
    The mechanical properties of AISI 4130 alloy steel are outlined in the following table.
    PropertiesMetricImperial
    Tensile strength, ultimate560 MPa81200 psi
    Tensile strength, yield460 MPa66700 psi
    Modulus of elasticity190-210 GPa27557-30458 ksi
    Bulk modulus (Typical for steel)140 GPa20300 ksi
    Shear modulus (Typical for steel)80 GPa11600 ksi
    Poissons ratio0.27-0.300.27-0.30
    Elongation at break (in 50 mm)21.50%21.50%
    Reduction of area59.659.60%
    Hardness, Brinell217217
    Hardness, Knoop (Converted from Brinell hardness)240240
    Hardness, Rockwell B (Converted from Brinell hardness)9595
    Hardness, Rockwell C (Converted from Brinell hardness, a value below normal HRC range, for comparison purposes only.)1717
    Hardness, Vickers (Converted from Brinell hardness)228228
    Machinability (Annealed and cold drawn. Based on 100% machinability for AISI 1212 steel.)7070

    Fabrication and Heat Treatment:
    Machinability:
    • AISI 4130 steel can be easily machined using conventional methods. However, machining becomes difficult when the hardness of the steel is increased.

    Forming:
    • Forming of AISI 4130 steel can be performed in the annealed condition.

    Welding:
    • Welding of AISI 4130 steel can be performed by all commercial methods.

    Heat Treatment:
    • AISI 4130 steel is heated at 871°C (1600°F) and then quenched in oil. This steel is usually heat-treated at temperatures ranging from 899 to 927°C (1650 to 1700°F).

    Forging:
    • Forging of AISI 4130 steel can be performed can be performed at 954 to 1204°C (1750 to 2200°F).

    Hot Working:
    • Hot working of AISI 4130 steel can be done at 816 to 1093°C (1500 to 2000°F)

    Cold Working:
    • AISI 4130 steel can be cold worked using conventional methods

    Annealing:
    • AISI 4130 steel can be annealed at 843°C (1550°F) followed by air cooling at 482°C (900°F)
    Request
    Callback


    Additional Information:

    • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A,Other
    • Port of Dispatch: MUMBAI NAHAVA SHEVA
    • Production Capacity: 220000
    • Delivery Time: 2 WEEKS
    • Packaging Details: standard
    Yes! I am Interested
    View PDF

    4130 Alloy Steel Tubing

    4130 Alloy Steel Tubing
    • 4130 Alloy Steel Tubing
    Get Best Quote
    Approx. Price: Rs 500 / MeterGet Latest Price

    Product Details:

    Minimum Order Quantity50 Meter
    Outer Diameter1/2 TO 36 INCH
    Steel Grade4130 GRADES
    EndPLAIN
    Length3m, 6m
    Unit Length6m, 3m
    Unit Pipe Length6 meter, 3 meter
    Thickness (mm)1.5 MM TO 50 MM THIK
    StandardAPI, DIN, ASTM, BS
    Diameter (Inch)1/2 TO 36
    ScheduleSchedule 10 through 160, STD, XS, XXS.
    Size1/2 TO 36 INCH
    BrandHeubach
    Thickness (Millimetre)Schedule 10 through 160, STD, XS, XXS.
    TypesRound
    Shape Round
    Min Outer Dimensions15 NB
    Max Outer Dimensions915 MM OD
    Nominal Size1/2 inch, 3 inch, 1 inch, 2 inch, >3 inch, 3/4 inch
    ColorBlack
    MaterialALLOY STEEL
    Carbon0.28 - 0.33
    GradeASTM A 519/4130
    Thickness1.6-3 mm
    Diameter25.40-31.75mm
    Chromium0.8 - 1.1 %
    Manganese0.7 - 0.9 %
    Molybdenum0.15 - 0.25 %
    Phosphorus0.035 % max
    Silicon0.15 - 0.35 %
    Sulphur0.04 % max

    We have carved a niche in the market as the Manufacturer & Supplier of AISI 1018 & 1020 Steel & 4130 Pipes from MUMBAI, India. The Steel Pipes we offer are fabricated using genuinely tested materials and always offered with a Test Certificate. Our AISI 1018 & 1020 & 4130 Steel Pipes are used by engineering students for various projects like BAJA, SUPRA, FSAE, ECOKART, etc. We ensure timely delivery across the country.

    Features
    • AISI 4130 is a low alloy steel containing molybdenum and chromium as strengthening agents. The carbon content is nominally 0.30% and with this relatively low carbon content, the alloy is excellent from the fusion weldability standpoint. The alloy can be hardened by heat treatment.

    Applications
    • Typical applications for 4130 low alloy steel include. structural use such as aircraft engine mounts and welded tubing applications.

    Machinability

    • This alloy is readily machined by conventional methods. Machinability is best with the alloy in the normalized and tempered condition. Although the alloy may be machined in the fully heat treated condition, machinability becomes more difficult with increasing strength (hardness) of the alloy.

    Forming

    • Formability is best in the annealed condition for which the ductility is very good, Bend radii of 1t on annealed sheet material may be made.

    4130 PIPE Seamless Pipe is tubing made to the pipe schedule. Alloy pipe in the power industry generally refers to an A335 material, but in the oil and gas market, 4130 pipes is used. This product is made to the pipe schedule but uses A519-4130 as the controlling seamless specification. The material is then heat treated to L80, P110 or the customer's specified properties. This material is easily welded and is generally used for above ground applications and utilizes the fittings, flanges and other piping components with the same 4130 chemistry.

    We wish to introduce ourselves as importers & stockists of Stainless Steel & Nickel Alloys likeHastealloy C-276, Hastealloy C-22, Inconel 600, Incolloy 825, Inconel 625, Nickel 200 / 201, Monel 400, Incolloy 800etc.& Titanium.

    We also import stock & supplyS.S. 904L,in sheets / plates, pipes, pipe-fittings & bars.Apart from the above, we also import, stock & supply Stainless Steel in sheet/plate, Pipe, tube & pipe-fittings etc.

    We have an extensive network of suppliers for instant delivery of difficult to find items, in case materials are out of stock. We are preferred suppliers for many large companies in the public & private sectors.

    ONE STOP SOURCE FOR STAINLESS STEEL,

    DUPLEX STEEL& CARBON STEEL PRODUCT


    MANUFACTURERSEXPOTERS & STOCKIESTOF

    ERW PIPES- 1/2" - 24" - SCH 10, SCH 20, SCH 40, SCH 80, SCH 160

    PIPE FITTINGS- ELBOW, REDUCER, TEE, STUB END ETC

    FLANGES- SORF, BLRF, WNRF, SWRF & LAPJOINT

    IBR PIPE, PIPE FITTINGS & FLANGES.


    IMPORTERS, EXPOTERS & STOCKIESTOF PLATES


    STAINLESS STEEL 304L,316L,317L,310S,309S, 314, 253MA,

    DUPLEX STEEL 2205/31803/1.4462,

    SUPER DUPLEX 2507, SMO254, 904L

    BOILER QUALITY ASTM A516 GRADE 60/70

    HARDOX 400 & 500

    Request
    Callback


    Additional Information:

    • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A,Other
    • Port of Dispatch: MUMBAI NAHAVA SHEVA
    • Production Capacity: 220000
    • Delivery Time: 2 WEEKS
    • Packaging Details: STANDARD
    Yes! I am Interested
    View PDF

    Chrome Moly Alloy Steel Tubing 4130

    Chrome Moly Alloy Steel Tubing 4130
    • Chrome Moly Alloy Steel Tubing 4130
    Get Best Quote
    Approx. Price: Rs 400 / MeterGet Latest Price

    Product Details:

    Minimum Order Quantity100 Meter
    BrandHeubach
    Iron Fe97.03 - 98.22 %
    Phosphorous P0.035 %
    GradeASTM A 519/4130
    Thickness3.00 mm
    Diameter25.40 mm
    Chromium Cr0.80 -1.10 %
    Manganese Mn0.40 -0.60 %
    Carbon C0.280 - 0.330 %
    Silicon Si0.15 -0.30 %
    Molybdenum Mo0.15 - 0.25 %
    Sulfur S0.04 %

    We have carved a niche in the market as the Manufacturer & Supplier of AISI 1018 & 1020 Steel & 4130 Pipes from MUMBAI, India. The Steel Pipes we offer are fabricated using genuinely tested materials and always offered with a Test Certificate. Our AISI 1018 & 1020 & 4130 Steel Pipes are used by engineering students for various projects like BAJA, SUPRA, FSAE, ECOKART, etc.

    Physical Properties:
    PropertiesMetricImperial
    Density7.85 g/cm30.284 lb/in³
    Melting point1432°C2610°F

    Mechanical Properties:
    PropertiesMetricImperial
    Tensile strength, ultimate560 MPa81200 psi
    Tensile strength, yield460 MPa66700 psi
    Modulus of elasticity190-210 GPa27557-30458 ksi
    Bulk modulus (Typical for steel)140 GPa20300 ksi
    Shear modulus (Typical for steel)80 GPa11600 ksi
    Poissons ratio0.27-0.300.27-0.30
    Elongation at break (in 50 mm)21.50%21.50%
    Reduction of area59.659.60%
    Hardness, Brinell217217
    Hardness, Knoop (Converted from Brinell hardness)240240
    Hardness, Rockwell B (Converted from Brinell hardness)9595
    Hardness, Rockwell C (Converted from Brinell hardness, a value below normal HRC range, for comparison purposes only.)1717
    Hardness, Vickers (Converted from Brinell hardness)228228
    Machinability (Annealed and cold drawn. Based on 100% machinability for AISI 1212 steel.)7070

    Thermal Properties:
    The thermal properties of AISI 4130 alloy steel are outlined in the following table.
    PropertiesMetricImperial
    Thermal conductivity (100°C)42.7 W/mK296 BTU in/hr.ft2. °F

    AMS 6348AMS 6371ASTM A331ASTM A829DIN 1.7218
    AMS 6350AMS 6373ASTM A506MIL S-18729UNI 25 CrMo 4
    AMS 6351AMS 6374ASTM A507MIL S-6758JIS SCCrM 1
    AMS 6360AMS 6528ASTM A513SAE J1397JIS SCM 2
    AMS 6361AMS 7496ASTM A519SAE J404SS 2225
    AMS 6362ASTM A29ASTM A646SAE J412B.S. CDS 110
    AMS 6370ASTM A322ASTM A752AFNOR 25 CD 4 (S)SAE J770
    Request
    Callback


    Additional Information:

    • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A,Other
    • Port of Dispatch: MUMBAI NAHAVA SHEVA
    • Production Capacity: 220000
    • Delivery Time: 4 WEEKS
    • Packaging Details: STANDARD
    Yes! I am Interested
    View PDF

    AISI 4130 Alloy Steel Pipes

    AISI 4130 Alloy Steel Pipes
    • AISI 4130 Alloy Steel Pipes
    Get Best Quote
    Approx. Price: Rs 300 / MeterGet Latest Price

    Product Details:

    Minimum Order Quantity200 Meter
    ShapeRound
    BrandHeubach
    Thickness (Millimetre)1.6-3 mm
    Iron Fe97.03 - 98.22 %
    Phosphorous P0.035 %
    Diameter25.40-31.75mm
    GradeASTM A 519/4130
    Chromium Cr0.80 -1.10 %
    Manganese Mn0.40 - 0.60 %
    Carbon C0.280 - 0.330 %
    Silicon Si0.15 - 0.30 %
    Molybdenum Mo0.15 - 0.25 %
    Sulfur S0.04 %

    We have carved a niche in the market as the Manufacturer & Supplier of AISI 1018 & 1020 Steel & 4130 Pipes from MUMBAI, India. The Steel Pipes we offer are fabricated using genuinely tested materials and always offered with a Test Certificate. Our AISI 1018 & 1020 & 4130 Steel Pipes are used by engineering students for various projects like BAJA, SUPRA, FSAE, ECOKART, etc. We ensure timely delivery across the country.

    Physical Properties:
    The following table shows the physical properties of AISI 4130 alloy steel.
    PropertiesMetricImperial
    Density7.85 g/cm30.284 lb/in³
    Melting point1432°C2610°F

    Mechanical Properties:
    PropertiesMetricImperial
    Tensile strength, ultimate560 MPa81200 psi
    Tensile strength, yield460 MPa66700 psi
    Modulus of elasticity190-210 GPa27557-30458 ksi
    Bulk modulus (Typical for steel)140 GPa20300 ksi
    Shear modulus (Typical for steel)80 GPa11600 ksi
    Poissons ratio0.27-0.300.27-0.30
    Elongation at break (in 50 mm)21.50%21.50%
    Reduction of area59.659.60%
    Hardness, Brinell217217
    Hardness, Knoop (Converted from Brinell hardness)240240
    Hardness, Rockwell B (Converted from Brinell hardness)9595
    Hardness, Rockwell C (Converted from Brinell hardness, a value below normal HRC range, for comparison purposes only.)1717
    Hardness, Vickers (Converted from Brinell hardness)228228
    Machinability (Annealed and cold drawn. Based on 100% machinability for AISI 1212 steel.)7070

    Thermal Properties Other Designations:

    AMS 6348AMS 6371ASTM A331ASTM A829DIN 1.7218
    AMS 6350AMS 6373ASTM A506MIL S-18729UNI 25 CrMo 4
    AMS 6351AMS 6374ASTM A507MIL S-6758JIS SCCrM 1
    AMS 6360AMS 6528ASTM A513SAE J1397JIS SCM 2
    AMS 6361AMS 7496ASTM A519SAE J404SS 2225
    AMS 6362ASTM A29ASTM A646SAE J412B.S. CDS 110
    AMS 6370ASTM A322ASTM A752AFNOR 25 CD 4 (S)SAE J770
    Request
    Callback


    Additional Information:

    • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A,Other
    • Port of Dispatch: MUMBAI NAHAVA SHEVA
    • Production Capacity: 180000
    • Delivery Time: 2 WEEKS
    • Packaging Details: standard
    Yes! I am Interested
    View PDF

    4130 Seamless Tubing

    4130 Seamless Tubing
    • 4130 Seamless Tubing
    Get Best Quote
    Approx. Price: Rs 400 / MeterGet Latest Price

    Product Details:

    Minimum Order Quantity75 Meter
    Outer Diameter1/2 TO 36 INCH
    EndPLAIN
    Unit Length6m, 3m
    Unit Pipe Length6 meter, 3 meter
    Length6m, 3m
    Steel GradeALLOY STEEL 4130
    Size1 inch-2 inch
    Surface FinishMill Finished
    ScheduleSchedule 10 through 160, STD, XS, XXS.
    Diameter (Inch)1/2 TO 36
    Thickness (Millimetre)Schedule 10 through 160, STD, XS, XXS.
    TypesRound
    ColorBLACK
    BrandHeubach
    Min Outer Dimensions15 MM OD
    Max Outer Dimensions914.4 MM OD
    MaterialALLOY STEEL
    Shape Round
    Nominal Size3/4 inch, 2 inch, 1 inch, 3 inch, 1/2 inch
    Thickness1.6 - 3 mm
    Diameter25.40-31.75mm

    Heaubach International is manufacturing & exports of AISI 4130 SEAMLESS Pipes, Fittings, Flanges & API connections in material grades AISI 4130. SP Metal manufactures its products in different sizes, range, type, and schedule-class.
    Heubach International offers an extensive range of ASTM A519 4130 seamless mechanical tubing is manufactured to meet your specific application requirements. Controlled modifications and adjustments are made to the tube making the process for each order and take into consideration end use and all finishing operations (including heat treatment) that will be performed after you have received the tubing.
    We have carved a niche in the market as the Manufacturer & Supplier of AISI 1018 & 1020 Steel & 4130 Pipes from MUMBAI, India. The Steel Pipes we offer are fabricated using genuinely tested materials and always offered with a Test Certificate. Our AISI 1018 & 1020 & 4130 Steel Pipes are used by engineering students for various projects like BAJA, SUPRA, FSAE, ECOKART, etc.

    Typical Mechanical Properties:
    ConditionUltimate StrengthYield StrengthElongation in 2 in.or 50mm,%Rockwell, Hardness B Scale
    ksiMpaksiMpa
    HR90621704832089
    SR105724855861095
    A75517553793081
    N90621604142089
    Request
    Callback


    Additional Information:

    • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A,Other
    • Port of Dispatch: MUMBAI NAHAVA SHEVA
    • Production Capacity: 220000
    • Delivery Time: 3 DAYS
    • Packaging Details: standard
    Yes! I am Interested
    View PDF

    Round AISI 4130 Pipe

    Round AISI 4130 Pipe
    • Round AISI 4130 Pipe
    • Round AISI 4130 Pipe
    • Round AISI 4130 Pipe
    • Round AISI 4130 Pipe
    • Round AISI 4130 Pipe
    Get Best Quote
    Approx. Price: Rs 500 / MeterGet Latest Price

    Product Details:

    Minimum Order Quantity30 Meter
    Corrosion ResistantYes
    GradeASTM A 519/4130
    Thickness1.6-3 mm
    LengthUp to 6 mtrs
    Test CertificateYes
    Diameter25.40-31.75mm

    We are one of the leading manufacturers & suppliers quality range of Round AISI 4130 Pipe. We offer this steel in different sizes and specifications as per the needs of our clients. The offered steel is manufactured using superior quality raw material and advanced technology by our adroit professionals. Our provided steel is checked on various parameters in order to ensure its flawlessness. Besides, clients can avail this steel from us at nominal prices.

    We have carved a niche in the market as the Manufacturer & Supplier of AISI 1018 & 1020 Steel & 4130 Pipes from MUMBAI, India. The Steel Pipes we offer are fabricated using genuinely tested materials and always offered with a Test Certificate. Our AISI 1018 & 1020 & 4130 Steel Pipes are used by engineering students for various projects like BAJA, SUPRA, FSAE, ECOKART, etc. We ensure timely delivery across the country.

    AISI 4130 is a chromium molybdenum alloy steel specification. It is supplied as round bar commonly in the hardened and tempered condition with a hardness of 18-22 HRC. With a lower carbon content range, AISI 4130provides better weldability, at the expense of through-thickness strength, than that of other oil and gas steel grades such as AISI 4140. AISI 4130 alloy steel is readily machineable in the supply condition of 18-22 HRC.

    Alloy steels are designated by AISI four-digit numbers. They are more responsive to mechanical and heat treatments than carbon steels. They comprise different types of steels with compositions which exceed the limitations of B, C, Mn, Mo, Ni, Si, Cr, and Va in the carbon steels.
    AISI 4130 alloy steel contains chromium and molybdenum as strengthening agents. It has a low carbon content, and hence it can be welded easily. The datasheet given below provides more details about AISI 4130 alloy steel.

    Chemical Composition:
    The chemical composition of AISI 4130 alloy steel is listed in the following table.

     

    ElementContent (%)
    Iron, Fe97.03 – 98.22
    Chromium, Cr0.80 – 1.10
    Manganese, Mn0.40 – 0.60
    Carbon, C0.280 – 0.330
    Silicon, Si0.15 – 0.30
    Molybdenum, Mo0.15 – 0.25
    Sulfur, S0.04
    Phosphorous, P0.035

     

    Alloy Steel 4130 Grade / Chrome Moly Steel:

    Alloy 4130 (AISI 4130) is a chromium molybdenum alloy steel. Alloy 4130 is a widely used due to its weldability, ease of fabrication and mild hardenability. The hardenability and weldability of Alloy 4130 are considered equivalent to 8630 (MIL-S-6250). Alloy 4130 is also vacuum degassed to meet the magnetic particle inspection standards of AMS 2301. AISI 4130 alloy steel contains chromium and molybdenum as strengthening agents. It has a low carbon content, and hence it can be welded easily.

    Request
    Callback


    Additional Information:

    • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A,Other
    • Port of Dispatch: MUMBAI NAHAVA SHEVA
    • Production Capacity: 240000
    • Delivery Time: 2 WEEKS
    • Packaging Details: STANDAD
    Yes! I am Interested
    View PDF

    4130 Alloy Steel Pipes

    4130 Alloy Steel Pipes
    • 4130 Alloy Steel Pipes
    • 4130 Alloy Steel Pipes
    • 4130 Alloy Steel Pipes
    • 4130 Alloy Steel Pipes
    • 4130 Alloy Steel Pipes
    • 4130 Alloy Steel Pipes
    • 4130 Alloy Steel Pipes
    Get Best Quote
    Approx. Price: Rs 900 / MeterGet Latest Price

    Product Details:

    Minimum Order Quantity30 Meter
    Outer Diameter1/2 TO 36 INCH
    EndPLAIN
    Length6m, 3m
    Unit Pipe Length3 meter, 6 meter
    Steel GradeALLOY STEEL
    Material GradeAISI 4130
    BrandHEUBACH
    Unit Length12 m, 6 m
    Diameter (Inch)1/2 TO 36
    ScheduleSchedule 10 through 160, STD, XS, XXS.
    Thickness (Millimetre)Schedule 10 through 160, STD, XS, XXS.
    TypesRound
    ColorBLACK
    MaterialAISI 4130
    Size1/2 TO 36
    Min Outer Dimensions15 NB
    Surface FinishMill Finished
    Max Outer Dimensions36
    Nominal Size>3 inch,1/2 TO 36, 3/4 inch, 3 inch, 2 inch, 1/2 inch, 1 inch
    GradeASTM A 519/4130
    Test CertificateYes
    Diameter25.40 - 31.75mm

    We are one of the leading manufacturers & suppliers quality range of AISI 4130 Pipes. We offer this steel in different sizes and specifications as per the needs of our clients. The offered steel is manufactured using superior quality raw material and advanced technology by our adroit professionals. Our provided steel is checked on various parameters in order to ensure its flawlessness. Besides, clients can avail this steel from us at nominal prices.

    Alloy steels are designated by AISI four-digit numbers. They are more responsive to mechanical and heat treatments than carbon steels. They comprise different types of steels with compositions which exceed the limitations of B, C, Mn, Mo, Ni, Si, Cr, and Va in the carbon steels.

    AISI 4130 alloy steel contains chromium and molybdenum as strengthening agents. It has low carbon content, and hence it can be welded easily. The datasheet given below provides more details about AISI 4130 alloy steel.


    Chemical Composition

    The chemical composition of AISI 4130 alloy steel is listed in the following table.

    ElementContent (%)
    Iron, Fe97.03-98.22
    Chromium, Cr0.80-1.10
    Manganese, Mn0.40-0.60
    Carbon, C0.280-0.330
    Silicon, Si0.15-0.30
    Molybdenum, Mo0.15-0.25
    Sulfur, S0.040
    Phosphorous, P0.035
    Physical Properties

    The following table shows the physical properties of AISI 4130 alloy steel.

    PropertiesMetricImperial
    Density7.85 g/cm30.284 lb/in
    Melting point1432 DegreeC2610 DegreeF
    Mechanical Properties

    The mechanical properties of AISI 4130 alloy steel are outlined in the following table.

    PropertiesMetricImperial
    Tensile strength, ultimate560 MPa81200 psi
    Tensile strength, yield460 MPa66700 psi
    Modulus of elasticity190-210 GPa27557-30458 ksi
    Bulk modulus (Typical for steel)140 GPa20300 ksi
    Shear modulus (Typical for steel)80 GPa11600 ksi
    Poissons ratio0.27-0.300.27-0.30
    Elongation at break (in 50 mm)21.50%21.50%
    Reduction of area59.659.60%
    Hardness, Brinell217217
    Hardness, Knoop (Converted from Brinell hardness)240240
    Hardness, Rockwell B (Converted from Brinell hardness)9595
    Hardness, Rockwell C (Converted from Brinell hardness, value below normal HRC range, for comparison purposes only.)1717
    Hardness, Vickers (Converted from Brinell hardness)228228
    Machinability (Annealed and cold drawn. Based on 100% machinability for AISI 1212 steel.)7070
    Thermal Properties

    The thermal properties of AISI 4130 alloy steel are outlined in the following table.

    Applications

    The following are some of the major applications of AISI 4130 alloy steel

    • Aircraft engine mounts
    • Welded tubing

    Hardening

    Hardening of AISI 4130 steel can be done with cold working or heat treatment.

    Request
    Callback


    Additional Information:

    • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A,Other
    • Port of Dispatch: MUMBAI NAHAVA SHEVA
    • Production Capacity: 240000
    • Delivery Time: 2 DAYS
    • Packaging Details: STANDARD
    Yes! I am Interested
    View PDF

    AISI 1018/4130 Seamless Pipes

    AISI 1018/4130 Seamless Pipes
    • AISI 1018/4130 Seamless Pipes
    • AISI 1018/4130 Seamless Pipes
    • AISI 1018/4130 Seamless Pipes
    • AISI 1018/4130 Seamless Pipes
    • AISI 1018/4130 Seamless Pipes
    Get Best Quote
    Approx. Price: Rs 600 / MeterGet Latest Price

    Product Details:

    Minimum Order Quantity30 Meter
    MaterialStainless Steel
    LengthUp to 6 mtrs
    BrandHeubach
    Thickness1.6-3 mm
    Test CertificateYes
    GradeASTM A 519/4130
    Diameter25.40-31.75mm

    We are one of the leading manufacturers & suppliers quality range of AISI 4130 Pipes. We offer this steel in different sizes and specifications as per the needs of our clients. The offered steel is manufactured using superior quality raw material and advanced technology by our adroit professionals. Our provided steel is checked on various parameters in order to ensure its flawlessness. Besides, clients can avail this steel from us at nominal prices.
    Alloy steels are designated by AISI four-digit numbers. They are more responsive to mechanical and heat treatments than carbon steels. They comprise different types of steels with compositions which exceed the limitations of B, C, Mn, Mo, Ni, Si, Cr, and Va in the carbon steels.

    Chemical Composition:
    The chemical composition of AISI 4130 alloy steel is listed in the following table.
    ElementContent (%)
    Iron, Fe97.03 – 98.22
    Chromium, Cr0.80 – 1.10
    Manganese, Mn0.40 – 0.60
    Carbon, C0.280 – 0.330
    Silicon, Si0.15 – 0.30
    Molybdenum, Mo0.15 – 0.25
    Sulfur, S0.040
    Phosphorous, P0.035

    We have carved a niche in the market as the Manufacturer & Supplier of AISI 1018 & 1020 Steel & 4130 Pipes from MUMBAI, India. The Steel Pipes we offer are fabricated using genuinely tested materials and always offered with a Test Certificate. Our AISI 1018 & 1020 & 4130 Steel Pipes are used by engineering students for various projects like BAJA, SUPRA, FSAE, ECOKART, etc. We ensure timely delivery across the country.

    Dimensions
    • We also provide cutting and bending facility.

    Applications
    • Automotive Rollcage, Chasis, and Other Parts
    • Hydraulic Equipment
    • Engineering Machinery
    • Agricultural Machinery
    Request
    Callback


    Additional Information:

    • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A,Other
    • Port of Dispatch: MUMBAI NAHAVA SHEVA
    • Production Capacity: 240000
    • Delivery Time: 2 DAYS
    • Packaging Details: standard
    Yes! I am Interested
    View PDF

    AISI 4130 Alloy Steel Pipes

    AISI 4130 Alloy Steel Pipes
    • AISI 4130 Alloy Steel Pipes
    Get Best Quote
    Approx. Price: Rs 750 / MeterGet Latest Price

    Product Details:

    Minimum Order Quantity10 Meter
    Outer Diameter1/2 TO 36 INCH
    EndPLAIN
    Unit Pipe Length3 meter, 6 meter
    Length3m, 6m
    Steel Grade4130
    Unit Length6 m
    BrandHEUBACH
    Diameter (Inch)1/2 TO 36
    ScheduleSchedule 10 through 160, STD, XS, XXS.
    Surface TreatmentBrushed
    Thickness (Millimetre)Schedule 10 through 160, STD, XS, XXS.
    TypesRound
    ColorBLACK
    MaterialALLOY STEEL
    Size1/2 TO 36
    Min Outer Dimensions15 NB
    Surface FinishMill Finished
    Max Outer Dimensions36
    Sulfur S0.04 %
    Nominal Size3/4 inch, 1/2 inch, 1 inch, 2 inch, >3 inch,1/2 TO 36, 3 inch
    Thickness2-3 mm
    Diameter25.40-31.75mm
    GradeASTM A 519/4130
    Chromium Cr0.80 -1.10 %
    Manganese Mn0.40 - 0.60 %
    Carbon C0.280 - 0.330 %
    Silicon Si0.15 -0.30 %
    Molybdenum Mo0.15 - 0.25 %
    Phosphorous P0.035 %

    We have carved a niche in the market as the Manufacturer & Supplier of AISI 1018 & 1020 Steel & 4130 Pipes from MUMBAI, India. The Steel Pipes we offer are fabricated using genuinely tested materials and always offered with a Test Certificate. Our AISI 1018 & 1020 & 4130 Steel Pipes are used by engineering students for various projects like BAJA, SUPRA, FSAE, ECOKART, etc. We ensure timely delivery across the country.

    Other Details
    • Surface treatment ASTM A519-Temporary Coating, Special Coating, Galvanized, immersion oil, lacquer, passivation, phosphating, etc; Or Oil-dip paint black with two plastic caps on each end
    • Inspection Strictly according to the standard requirements and offer the original MTC (EN10204.3.1/3.1B)
    • Relevant Test ASTM A519-Chemical Component Analysis, Mechanical Properties (Ultimate tensile strength, Yield strength, Elongation), Technics Properties(Flattening Test, Flaring Test, Bending Test, Hardness Test, Blow Test, etc), Exterior Size Inspection, Nondestructive electric Test, Hydrostatic Test, magnetic particle testing
    • Manufacture methods Cold Finished method or hot finished Method.
    • Applications Automobile and Bearing Industry, Mechanical and Structural Purpose, Hydraulic and Petrochemical Purpose, etc.

    Physical Properties
    The following table shows the physical properties of AISI 4130 alloy steel.
    PropertiesMetricImperial
    Density7.85 g/cm30.284 lb/in
    Melting point1432 DegreeC2610 DegreeF

    Mechanical Properties
    The mechanical properties of AISI 4130 alloy steel are outlined in the following table.
    PropertiesMetricImperial
    Tensile strength, ultimate560 MPa81200 psi
    Tensile strength, yield460 MPa66700 psi
    Modulus of elasticity190-210 GPa27557-30458 ksi
    Bulk modulus (Typical for steel)140 GPa20300 ksi
    Shear modulus (Typical for steel)80 GPa11600 ksi
    Poissons ratio0.27-0.300.27-0.30
    Elongation at break (in 50 mm)21.50%21.50%
    Reduction of area59.659.60%
    Hardness, Brinell217217
    Hardness, Knoop (Converted from Brinell hardness)240240
    Hardness, Rockwell B (Converted from Brinell hardness)9595
    Hardness, Rockwell C (Converted from Brinell hardness, a value below normal HRC range, for comparison purposes only.)1717
    Hardness, Vickers (Converted from Brinell hardness)228228
    Machinability (Annealed and cold drawn. Based on 100% machinability for AISI 1212 steel.)7070

    The following are some of the major applications of AISI 4130 alloy steel
    • Aircraft engine mounts
    • Welded tubing
    Request
    Callback


    Additional Information:

    • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A,Other
    • Port of Dispatch: MUMBAI NAHAVA SHEVA
    • Production Capacity: 180000
    • Delivery Time: 4 WEEKS
    • Packaging Details: STANDARD
    Yes! I am Interested
    View PDF

    Chrome Moly Pipes

    Chrome Moly Pipes
    • Chrome Moly Pipes
    • Chrome Moly Pipes
    • Chrome Moly Pipes
    • Chrome Moly Pipes
    • Chrome Moly Pipes
    Get Best Quote
    Approx. Price: Rs 400 / MeterGet Latest Price

    Product Details:

    Minimum Order Quantity50 Meter
    Length 6m, 3m
    ShapeRound
    Surface FinishMill Finished
    GradeASTM A 519/4130
    BrandHeubach
    Iron Fe97.03 - 98.22 %
    Phosphorous P0.035 %
    Diameter25.40-31.75mm
    Thickness1.6-3 mm
    Test CertificateYes
    Chromium Cr0.80 -1.10 %
    Manganese Mn0.40 - 0.60 %
    Carbon C0.280 -0.330 %
    Silicon Si0.15 -0.30 %
    Molybdenum Mo0.15 -0.25 %
    Sulfur S0.04 %

    Request
    Callback


    Additional Information:

    • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A,Other
    • Port of Dispatch: MUMBAI NAHAVA SHEVA
    • Production Capacity: 240000
    • Delivery Time: 2 DAYS
    • Packaging Details: STANDARD
    Yes! I am Interested

    AISI 4130 Seamless Tubes

    AISI 4130 Seamless Tubes
    • AISI 4130 Seamless Tubes
    Get Best Quote
    Approx. Price: Rs 800 / MeterGet Latest Price

    Product Details:

    Minimum Order Quantity5 Meter
    BrandHeubach
    Diameter25.40 - 31.75mm
    Thickness1.6 - 3 mm
    GradeASTM A 519/4130

    We wish to introduce ourselves as importers & stockists of Stainless Steel & Nickel Alloys like Hastealloy C-276, Hastelloy C-22, Inconel 600, Incolloy 825, Inconel 625, Nickel 200 / 201, Monel 400, Incolloy 800 etc. & Titanium. We are authorized stockholders & Distributors of Outokumpu VDM in India for Nickel Alloys. We maintain stocks of sizeable quantities in these alloys.

    We also import stock & supply S.S. 904L, in sheets/plates, pipes, pipe-fittings & bars.Apart from the above, we also import, stock & supply Stainless Steel in sheet/plate, Pipe, tube & pipe-fittings etc. We can also import & supply to your specific requirements in all the above items from ready stocks of various mills.

    We have an extensive network of suppliers for instant delivery of difficult to find items, in case materials, are out of stock. We are preferred suppliers for many large companies in the public & private sectors. We have executed some jobs with stringent quality requirements for the atomic & nuclear energy departments of the government either directly or through their vendors.

    We assure you of our best services & look forward to a long & mutually beneficial business relationship with you.

    Manufacturers Exporters & Stockiest Of:
    • Erw Pipes – ½” – 24” – Sch 10, Sch 20, Sch 40, Sch 80, Sch 160
    • Pipe Fittings - Elbow, Reducer, Tee, Stub End Etc
    • Flanges – Surf, Blrf, Wnrf, Swrf & Lapjoint
    • Ibr Pipe, Pipe Fittings & Flanges.

    Importers, Exporters & Stockiest Of Plates Stainless Steel:
    • 304L, 316L, 317L, 310S, 309S, 314, 253MA,
    • DUPLEX STEEL 2205/31803/1.4462,
    • SUPER DUPLEX 2507, SMO254, 904L
    4130 PIPE Seamless Pipe is tubing made to the pipe schedule. Alloy pipe in the power industry generally refers to an A335 material, but in the oil and gas market, 4130 pipes is used. This product is made to the pipe schedule but uses A519-4130 as the controlling seamless specification. The material is then heat treated to L80, P110 or the customer’s specified properties. This material is easily welded and is generally used for above ground applications and utilizes the fittings, flanges and other piping components with the same 4130 chemistry. This product is a good alternative to replace X65 through X80 piping items where the usage or repair is too small for mill production.

    We have carved a niche in the market as the Manufacturer & Supplier of AISI 1018 & 1020 Steel & 4130 Pipes from MUMBAI, India. The Steel Pipes we offer are fabricated using genuinely tested materials and always offered with a Test Certificate. Our AISI 1018 & 1020 & 4130 Steel Pipes are used by engineering students for various projects like BAJA, SUPRA, FSAE, ECOKART, etc. We ensure timely delivery across the country.

    Specifications
    StandardAlloy Steel
    AISI 4130 Alloy SteelUNS G41300
    AISI 4340 Alloy SteelUNS G43400
    AISI 4140 Alloy SteelUNS G41400
    AISI 8620 Alloy SteelUNS G86200

    AISI 4130 - chromium molybdenum alloy steel. A low alloy steel is used in oil patch applications and used widely as an aircraft steel. 4130 is an oil and gas steel grade with a lower carbon content than 4140 giving 4130 improved weldabilities, the trade-off is reduced through thickness strength. 4130 has a low resistance to corrosion. 4130 can also be used to make car connecting rods, shafts, fittings, engine mounting lugs, bushes, gears, axles, bolts, gas cylinders, airframe components.
    Request
    Callback


    Additional Information:

    • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A,Other
    • Port of Dispatch: MUMBAI NAHAVA SHEVA
    • Production Capacity: 180000
    • Delivery Time: 4 WEEKS
    • Packaging Details: STANDARD
    Yes! I am Interested
    View PDF

    Chromoly Steel Tube

    Chromoly Steel Tube
    • Chromoly Steel Tube
    Get Best Quote
    Approx. Price: Rs 400 / MeterGet Latest Price

    Product Details:

    Minimum Order Quantity50 Meter
    BrandHeubach
    GradeASTM A 519/4130
    Thickness1.6 - 3 mm
    Diameter25.40-31.75mm

    Chemical Composition Ranges and Limits, percent:
    AISI NumberCMnP
    Max.
    Max.SiNiCrMo
    AISI 41300.28/0.330.40/0.600.0350.040.20/0.350.80/1.100.15/0.25
    AISI 41370.35/0.400.70/0.900.0350.040.20/0.350.80/1.100.15/0.25
    AISI 41400.38/0.430.75/1.000.0350.040.20/0.350.80/1.100.15/0.25
    AISI 41420.40/0.450.75/1.000.0350.040.20/0.350.80/1.100.15/0.25
    AISI 41450.43/0.480.75/1.000.0350.040.20/0.350.80/1.100.15/0.25
    AISI 41470.45/0.500.75/1.000.0350.040.20/0.350.80/1.100.15/0.25
    AISI 41500.48/0.530.75/1.000.0350.040.20/0.350.80/1.100.15/0.25
    AISI 41610.56/0.640.75/1.000.0350.040.20/0.350.70/0.900.25/0.35
    AISI 43200.17/0.220.45/0.650.0350.040.20/0.351.65/2.000.40/0.600.20/0.30
    AISI 43400.38/0.430.60/0.800.0350.040.20/0.351.65/2.000.70/0.900.20/0.30
    AISI 44190.18/0.230.45/0.650.0350.040.20/0.350.45/0.60
    AISI 46150.13/0.180.45/0.650.0350.040.20/0.351.65/2.000.20/0.30
    Request
    Callback


    Additional Information:

    • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A,Other
    • Port of Dispatch: MUMBAI NAHAVA SHEVA
    • Production Capacity: 220000
    • Delivery Time: 4 WEEKS
    • Packaging Details: STANDARD
    Yes! I am Interested
    View PDF

    ASTM A519 4130 Tubing

    ASTM A519 4130 Tubing
    • ASTM A519 4130 Tubing
    Get Best Quote
    Approx. Price: Rs 800 / MeterGet Latest Price

    Product Details:

    Minimum Order Quantity10 Meter
    BrandHeubach
    GradeASTM A 519/4130
    Thickness1.6-3 mm
    Diameter25.40 - 31.75mm

    ASTM A519 Gr 4130 Seamless Pipes ASTM A519 Gr 4130 Seamless Tubes, AISI 4130 Steel Pipes Manufacturer & Stockists in India.
    Heaubach International is manufacturing & exports of AISI 4130 SEAMLESS Pipes, Fittings, Flanges & API connections in material grades AISI 4130. SP Metal manufactures its products in different sizes, range, type, and schedule-class.

    We stock all AISI 4130 Pipes, 4130 Tubing, 4130 Flanges, 4130 Pipes Fittings, 4130 Elbow etc. The carbon content is nominally 0.30% and with this relatively low carbon content, the alloy is excellent from the fusion weldability standpoint. The alloy can be hardened by heat treatment.

    AISI 4130 Pipes Specification
    • Product Name:AISI 4130 Pipes
    • We accept all small/large quantity orders.
    • Surface treatment: ASTM A519-Temporary Coating, Special Coating, Galvanized, immersion oil, lacquer, passivation, phosphating, etc; Or Oil-dip paint black with two plastic caps on each end.
    • Inspection: Strictly according to the standard requirements and offer the original MTC (EN10204.3.1/3.1B)
    • Relevant Test: ASTM A519-Chemical Component Analysis, Mechanical Properties (Ultimate tensile strength, Yield strength, Elongation), Technics Properties(Flattening Test, Flaring Test, Bending Test, Hardness Test, Blow Test, etc), Exterior Size Inspection, Nondestructive electric Test, Hydrostatic Test, magnetic particle testing
    • Manufacture methods: Cold Finished method or hot finished Method.

    Applications:
    • Automobile and Bearing Industry, Mechanical and Structural Purpose, Hydraulic and Petrochemical Purpose, etc.

    We can now provide fittings and flanges in one package, and with our experience in distribution, can ship AISI 4130 Drill Pipes, AISI 4130 Line Pipes, AISI 4130 Seamless Pipes, ASTM A519 Gr 4130 Seamless Pipes Tubes all over the world on quick lead times.

    Below are our available ASTM A519 Gr 4130 Seamless Pipes Tubes that will meet your project needs. We will help you put together your entire project and ship it to your closest port.

    Chemical Composition:
    Grade DesignationCarbonMangan- esePhosphorus, maxSulfur, maxSiliconNickelChromiumMoly bdenum
    41300.28-0.330.40-0.600.040.040.15-0.350.80-1.100.15-0.25

    Tensile Properties:
    Grade DesignationConditionUltimate StrengthYield StrengthElongation in 2 in.or 50mm,%Rockwell,Hardness B Scale
    ksiMpaksiMpa
    4130HR90621704832089
    -SR105724855861095
    -A75517553793081
    -N90621604142089

    Other Details:

    • The following specifications cover Alloy Steels 4130
    • AISI 4130,AMS 6348,AMS 6350,AMS 6351,AMS 6360,AMS 6361,AMS 6362,AMS 6370,AMS 6371,AMS 6373,AMS 6374,AMS 6528,AMS 7496,ASTM A29,ASTM A322,ASTM A331,ASTM A506,ASTM A507,ASTM A513,ASTM A519,ASTM A646 (Forging – Open Die),ASTM A752,ASTM A829 (Plate),MIL S-18729,MIL S-6758,SAE J1397,SAE J404,SAE J412,UNS G41300
    Request
    Callback


    Additional Information:

    • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A,Other
    • Port of Dispatch: MUMBAI NAHAVA SHEVA
    • Production Capacity: 220000
    • Delivery Time: 4 WEEKS
    • Packaging Details: standard
    Yes! I am Interested
    View PDF
    X

    Explore more products



    Reach Us
    Mahendra Jain (CEO)
    15, Keshav Bhavan, 1st Floor, 1st Parisiwada Lane Near V. P. Road Police Station
    Girgaon, Mumbai- 400004, Maharashtra, India



    Call Us

    Share Us

    F GT L


    Send E-mailSend SMS