Material | Pure Titanium plate and titanium alloy |
---|---|
Standard | ASTM B265, ASME SB265,AMS 4900, AMS 4901, AMS 4902 |
Type | Clad Plate, Rolling Plate, Flat Shim, Plain Sheet, Rolling Sheet Rolls, Foils, Coils, Plate, Strip, Sheet, Flats, Blank (Circle), ,Flat Sheet, Shim Sheet, soft annealed, descaled, sheared, annealed, Checker Plate, tread plate |
ASTM B265 Titanium Plate surface | Hot rolled plate (HR), Cold rolled sheet (CR), No.1 finish hot rolled ASTM B265 Titanium Plate, BA, No.3, No.4, No.6, No.1, No. 2D, No. 2B, BA NO(8), No.7, 2B, 2D, SATIN (Met with Plastic Coated), 2B, 1D, No.4, 8K, BA, hairline, brush, satin, mirror etc. |
ASTM B265 Titanium Plate Length | 0-12mm or as required |
Titanium Plate Thickness | 0.3 to 1200 mm or as required |
Titanium Alloy Plate Width | 0-2500mm or as required |
Titanium alloy Plate Process | Hot/ Cold Rolled |
Product Details:
Minimum Order Quantity | 100 Kg |
Single Piece Length | 3 meter |
Material | Nickel 200 Pipes And Tubes |
Usage/Application | Utilities Water |
Technique | Plain End,Beveled End,Treaded |
Product Type | Round,Square,Hollow,Rectangular,Hydraulic,Coiled,Straight Pipes,"U" Shape,Pan Cake Coils etc |
Steel Grade | WERKSTOFF NR. 2.4066 Welded Pipe |
Grade | ASTM B161 200 Nickel Round Pipes |
Tensile Strength | 1632 DegreeC (2970 DegreeF) |
Pipe Section | Double Random,Single Random,Standard & Cut length Pipe |
HEUBACH INTERNATIONAL offers a wide array of Nickel Alloy 200 Pipes to the valued customers, which are strengthened wrought materials. These Nickel 200 Seamless Pipes (UNS N02200) is a commercially pure nickel that exhibits good corrosion resistance. Nickel 200 Welded Pipes is a commercially pure nickel that exhibits good corrosion resistance and has rather low electrical resistivity. Meanwhile, these Nickel 200 EFW Pipes are also being offered in different sizes and shapes to our customers. HEUBACH INTERNATIONAL is specialized in manufacturing house of these quality Nickel 200 ERW Pipes, which is a modification to control carbon which keeps it from being embrittled by inter – granular precipitates at temperatures of 600 Degree F to 1400 Degree F in many processes. Nickel 200 Round Pipes are solid solution strengthened, commercially pure wrought materials with good mechanical properties over a wide range of temperatures and excellent resistance to many corrosives, in particular hydroxides. These Nickel 200 Pipes is ferromagnetic and provides high thermal and electrical conductivity in comparison to nickel – base alloys, stainless and low alloy steels. Nickel 200 Pipes is not recommended for service above 600 Degree F (316 Degree C) because long – time exposures in the 800 Degree F to 1200 Degree F range result in precipitation of a carbon containing phase and loss of ductility. These Nickel 200 Pipes also has a high Curie temperature and good magnetostrictive properties.
UNS N02200 Welded Pipe Exporter, Suppliers of ASTM B161 Nickel 200 Seamless Pipes, GOST ????-2 Pipe, Nickel WERKSTOFF NR. 2.4066 Pipe Manufacturer in Mumbai, India. 200 Nickel Seamless Pipes, Alloy 200 Pipe, Nickel 200 Bush Hex Pipe, 200 Nickel Pipes, 200 Alloy Seamless Pipes, ASME SB622 Nickel Pipe Suppliers and Exporters in Mumbai, India.Nickel 200 Seamless Pipe, Nickel 200 Welded Pipes, 200 Nickel Hollow Pipe, Nickel DIN NR. 2.4066 Pipes, Nickel 200 Hexagonal Pipe, ASME200 Nickel Alloy Pipes Chemical Composition
Nickel 200 | Ni | C | Mo | Mn | Si | Fe | P | S | Cu | Cr |
99.0 min | 0.15 max | – | 0.35 max | 0.1 max | 0.4 max | – | 0.01 max | 0.25 max | – |
Nickel Alloy 200 Pipe Mechanical Properties
Density | Melting Point | Yield Strength (0.2%Offset) | Tensile Strength | Elongation |
8.9 g/cm3 | 1446 °C (2635 °F) | Psi – 21500 , MPa – 148 | Psi – 67000 , MPa – 462 | 45 % |
Equivalent Grades for 200 Nickel Pipe
STANDARD | UNS | WERKSTOFF NR. | AFNOR | EN | JIS | BS | GOST |
Nickel 200 | N02200 | 2.4066 | N-100M | Ni 99.2 | NW 2200 | NA 11 | ????-2 |
Additional Information:
Product Details:
Single Piece Length | 6 meter |
Material | Astm B725 Nickel Alloy Capillary Pipe |
Usage/Application | Oil Cooler Pipe |
Grade | 201 Nickel Pipes |
Size | 4 to 219mm W. T.: 0.5 to 20mm |
Unit Length | 6 m, 12 m |
Brand | Nickel Pipe make Sanyo Special Steel,Japan Nickel Steel Pipe make Schoeller Bleckmann,Austria Nick |
Standard | ASTM B829 nickel alloy seamless pipes |
Shape | Nickel are available in form of Round, Square, Hollow, Rectangular, Hydraulic, Coiled, Straight Pipe |
Color | Polished,AP (Annealed & Pickled),BA (Bright & Annealed),MF,NO.1,NO.4,2B,BA,HL,8K,Mirror fi |
HEUBACH INTERNATIONAL is one of the pioneer trading houses of quality Nickel Alloy 201 Pipes, which are Commercially Pure Nickel. It only differs from Ni 200 Pipes by its carbon content, where this slight drop in carbon allows Nickel 201 Seamless Pipes to be utilized in higher temperature applications (over 600 Degree F). Nickel 201 Welded Pipes are solid solution strengthened, commercially pure wrought materials with good mechanical properties over a wide range of temperatures and excellent resistance to many corrosives, in particular hydroxides. Nickel 201 EFW Pipes was a modification of 200 to control carbon which keeps it from being embrittled by inter – granular precipitates at temperatures of 600 Degree F to 1400 Degree F in many processes. Typically, the elemental restrictions of both, Nickel 201 EFW Pipes and nickel 201 pipes, are combined into one, dual – certified chemistry resulting in a single alloy with the desired characteristics of both alloys. Nickel 201 Round Pipes offer corrosion resistance in reducing and neutral media as well as in oxidizing atmospheres provided that the oxidizing media allows the formation of a passive oxide film. The oxide film accounts for the excellent resistance of Nickel 201 Pipes in caustic environments. Corrosion rates of Nickel 201 Pipes in both marine and rural atmospheres are very low. Nickel 201 Pipes is normally limited to service at temperatures below 600 Degree F.
201 Nickel Alloy Pipes Chemical Composition
Nickel 201 | Ni | C | Mo | Mn | Si | Fe | P | S | Cu | Cr |
Balance | 0.15 max | – | 0.35 max | 0.35 max | 0.40 max | – | 0.01 max | 0.25 max | – |
Nickel Alloy 201 Pipe Mechanical Properties
Density | Melting Point | Yield Strength (0.2%Offset) | Tensile Strength | Elongation |
8.9 g/cm3 | 1446 °C (2635 °F) | Psi – 21500 , MPa – 148 | Psi – 67000 , MPa – 462 | 45 % |
Equivalent Grades for 201 Nickel Pipe
STANDARD | UNS | WERKSTOFF NR. | AFNOR | EN | JIS | BS | GOST |
Nickel 201 | N02201 | 2.4068 | – | LC-Ni 99 | NW 2201 | NA 12 | ????-2 |
Nickel 201 Seamless / Welded Pipes Application Industries
Additional Information:
Product Details:
Single Piece Length | 6 meter |
Material | WERKSTOFF NR. 1.4547 Custom Pipe |
Usage/Application | Oil Cooler Pipe |
Grade | ASTM A312 254 SMO Round Pipes |
Size | 4 to 219mm W. T.: 0.5 to 20mm |
Unit Length | 12 m, 6 m |
Brand | Nickel Pipe make Sanyo Special Steel, Japan Nickel Steel Pipe make Schoeller Bleckmann, Austria Nick |
Standard | ASTM A 409 ASME SA 409 / ASTM A 312 ASME SA 312 / ASTM A 358 ASME SA 358 |
Color | Polished, AP (Annealed & Pickled), BA (Bright & Annealed), MF, NO.1, NO.4, 2B, BA, HL, 8K, Mirror fi |
HEUBACH INTERNATIONAL offers a wide array of 254 SMO Pipes, which is well – tested on varied parameters thereby ensuring its high quality and durable standards. SMO 254 Round Pipes (UNS S31254) is an austenitic stainless steel designed for maximum resistance to pitting and crevice corrosion. SMO 254 Seamless Pipes is developed for use in halide-containing environment such as seawater. SMO 254 Welded Pipes is a very high end, molybdenum and nitrogen alloyed super austenitic stainless steel with low carbon content. SMO 254 EFW Pipes is an austenitic stainless steel with high molybdenum content. SMO 254 ERW Pipes is often used in Flue – gas cleaning, Desalination, Heat exchangers, and more. Meanwhile, these Alloy SMO 254 Square Pipes are also being offered in different sizes and shapes to our customers. HEUBACH INTERNATIONAL is one of the well-known supplier and stockist of SMO 254 Rectangular Pipes, which is also known as 18 / 8 stainless steel and is the most common stainless steel. SMO 254 Electropolish Pipes has excellent resistance to a wide range of atmospheric environments and many corrosive media. SMO 254 Hexagonal Pipes is subject to pitting and crevice
SMO 254 Pipes Chemical Composition
SMO 254 | Ni | C | Mo | Mn | Si | Fe | Cu | S | P | Cr |
17.5 – 18.5 | 0.02 max | 6 – 6.5 | 1 max | 0.8 max | – | 0.5 – 1 | 0.01 max | 0.03 max | 19.5 – 20.5 |
SMO 254 Pipe Mechanical Properties
Density | Melting Point | Yield Strength (0.2%Offset) | Tensile Strength | Elongation |
8.0 g/cm3 | 1320-1390 ??? | 300 | 650 | 35 % |
Equivalent Grades for 254 SMO Pipe
STANDARD | UNS | WERKSTOFF NR. | AFNOR | EN | JIS | SIS | GOST |
SMO 254 | S31254 | 1.4547 | Z1 CNDU 20.18.06Az | X1CrNiMoCuN20-18-7 | – | 2378 | – |
SMO 254 Seamless / Welded Pipes Application Industries
Additional Information:
Product Details:
Brand | Nickel 200/201 Forged Fittings |
Size | 1/2 inch o 50 inch |
Material | Nickel 200/201 Forged Fittings |
Usage/Application | - Off-Shore Oil Drilling Companies - Power Generation - Petrochemicals - Gas Processing - Specialty |
Grade | Nickel 200/201 Forged Fittings |
Standard | Nickel 200/201 Forged Fittings |
Backed by rich industry experience, HEUBACH INTERNATIONAL are manufacturing, supplying and trading a vast variety of Nickel Alloy 200 Forged Threaded Fittings. Typically, the elemental restrictions of both, Nickel 200 Forged Threaded Elbow (UNS N02200) and Nickel 201 Forged Fittings (UNS N02201) are combined into one and dual – certified chemistry resulting in a single alloy with the desired characteristics of both alloys. Other useful features of Nickel 200 Forged Threaded Tee are its magnetic and magnetostrictive properties, high thermal and electrical conductivities, low gas content and low vapor pressure. Nickel 200 Forged Threaded Cross are often used in Synthetic Fiber Production, Processes where Sodium Hydroxide is used, Food Processing, and more. Meanwhile, these Nickel 200 Forged Threaded Cap are also being offered in different sizes and shapes to our customers. Nickel 200 Forged Threaded Fittings has outstanding resistance to caustic alkalis up to and including the molten state. In acid, alkaline and neutral salt solutions, Nickel 200 Forged Threaded Coupling shows good resistance, but in oxidizing salt solutions severe attack will occur. Nickel 200 Forged Threaded Union is considered resistant to potable water with up to about 200 mg / L chlorides at ambient temperatures, reducing to about 150 mg / L at 60 Degree C. Nickel 200 Forged Threaded Bushing is used for a variety of household and industrial applications such as screws, machinery parts, car headers.
200/201 Nickel Forged Fittings Equivalent Grades
STANDARD | UNS | WNR. | JIS | EN |
Nickel 200 | N02200 | 2.4066 | NW 2200 | Ni 99.2 |
Nickel 201 | N02201 | 2.4068 | NW 2201 | LC-Ni 99 |
Chemical Composition of Nickel 200/201 Forged Fittings
Grade | C | Mn | Si | S | Cu | Fe | Ni |
Nickel 200 | 0.15 max | 0.35 max | 0.35 max | 0.01 max | 0.25 max | 0.40 max | 99.0 min |
Nickel 201 | 0.02 max | 0.35 max | 0.35 max | 0.01 max | 0.25 max | 0.40 max | 99.0 min |
Mechanical Properties Of Nickel 200/201 Forged Fittings
Grade | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
Nickel 200 | 8.9 g/cm3 | 1446 °C (2635 °F) | Psi – 67000 , MPa – 462 | Psi – 21500 , MPa – 148 | 45 % |
Nickel 201 | 8.9 g/cm3 | 1446 °C (2635 °F) | Psi – 67000 , MPa – 462 | Psi – 21500 , MPa – 148 | 45 % |
Product Details:
Material | Titanium Gr 2 Seamless Pipe |
Wall Thickness | 4 to 219mm W. T.: 0.5 to 20mm |
Product Type | Titanium are available in form of Round,Square,Hollow,Rectangular,Hydraulic,Coiled,Straight P |
Grade | ASTM B337 ASME SB B337 R56400 |
Usage/Application | Utilities Water |
Size/Diameter | 1/2"NB to 24"NB in Sch 10s, 40s, 80s, 160s, XXS. |
Single Piece Length | 3 meter, 6 meter |
Test Pressure | 1665 DegreeC (3030 DegreeF) |
Technique | ASTM B861 or B862 Grade 2 Titanium Pipe |
HEUBACH INTERNATIONAL is an eminent manufacturer, supplier and trader of a vast range of Grade 2 Titanium Pipes, which is available in best prices for our clients. With moderate strength and excellent corrosion resistance and formability, Titanium Grade 2 Seamless Pipes represents the most widely used form of titanium. These Titanium Grade 2 Welded Pipes is typically used in applications that require superior corrosion resistance in various aggressive media. Titanium Grade 2 EFW Pipes offers high corrosion resistance and a greater working range than aluminum. These Titanium Grade 2 ERW Pipes also offers excellent corrosion resistance, superior formability and strength between grades 1 and 3. Titanium Grade 2 Round Pipes is the most commonly used and widely available grade of unalloyed titanium. Meanwhile, these Titanium Grade 2 Square Pipes are also being offered in different sizes and shapes to our customers. HEUBACH INTERNATIONAL is a known manufacturer and exporter of Titanium Grade 2 Rectangular Pipes, which has different elements such as such as molybdenum, silicon or vanadium. Biocompatibility of these Titanium Grade 2 Electropolish Pipes is excellent, especially when direct contact with tissue or bone is required. Titanium Grade 2 Hexagonal Pipes is used in applications requiring moderate strength and major corrosion resistance, which include: Aerospace structures, Chemical processing, Medical industry, and Marine industry. These Titanium Grade 2 Hallow Pipes is used in high strength applications, applications requiring materials that meet applications requiring more strength.
Titanium Gr 2 Seamless Pipe, Titanium Gr.2 Welded Pipes Types of Titanium pipeTitanium Gr 2 | C | Ti | N | Fe | H | O | V | Al |
0.1 max | 99.2 min | 0.03 max | 0.3 max | 0.015 max | 0.25 max | – | – |
Titanium Alloy Gr 2 Pipe Mechanical Properties
Density | Melting Point | Yield Strength (0.2%Offset) | Tensile Strength | Elongation |
4.5 g/cm3 | 1665 °C (3030 °F) | Psi – 39900 , MPa – 275 | Psi – 49900 , MPa – 344 | 20 % |
Additional Information:
Product Details:
Material | Titanium Gr 5 Seamless Pipes |
Wall Thickness | 0.5 to 20mm |
Product Type | Seamless / ERW/ EFW / Welded / Fabricated / CDW / DOM / CEW Grade 5 Titanium |
Grade | Titanium Gr 5 EFW Pipes |
Usage/Application | Drinking Water |
Size/Diameter | 4 to 219mm W. T.: 0.5 to 20mm |
Single Piece Length | 6 meter, 3 meter |
Test Pressure | 1632 DegreeC (2970 DegreeF) |
Technique | Plain End,Beveled End,Treaded Pipe,Screwed ends |
HEUBACH INTERNATIONAL offers a vast range of Grade 5 Titanium Pipes, where our packaging experts pack these products in premium quality material to ensure their safe transit. Titanium Grade 5 Seamless Pipes is the most widely used titanium alloy of the alpha – plus – beta class, and is also the most common of all titanium alloys. Most commonly used alloy, Titanium Grade 5 Welded Pipes is significantly stronger than other commercially pure titanium whilst still retaining the same stiffness and thermal properties (excluding thermal conductivity). The high strength, light weight and corrosion resistance of Titanium Grade 5 EFW Pipes enables this grade to be used in many applications. Meanwhile, Titanium Grade 5 ERW Pipes are also being offered in different sizes and shapes to our customers. HEUBACH INTERNATIONAL is a known manufacturer and exporter of Titanium Grade 5 Round Pipes, which are metals that contain a mixture of titanium and other chemical elements. The use of a machine in making Titanium Grade 5 Square Pipes consisting of an anvil or base aligned with a hammer that is raised and then dropped on molten metal, in order to forge or stamp the metal. Titanium Grade 5 Rectangular Pipes are used in several applications, such as Blades, discs, rings, airframes, fasteners, components. Vessels, cases, hubs, forgings, biomedical implants and so on. Titanium Grade 5 Electropolish Pipes have very high tensile strength and toughness (even at extreme temperatures).
ASTM Specification | ASTM B337 ASME SB B337 R56400 |
---|---|
Standard | ASTM, ASME, JIS, AISI, AMS, EN, SAE, DIN, NF, TOCT, DS, DTD, GB |
ASTM B337 Grade 5 Titanium Seamless Pipe Size | 4 to 219mm W. T.: 0.5 to 20mm |
UNS R56400 Welded Pipe Size | 5.0 - 1219.2 mm |
Titanium WERKSTOFF NR. 3.7165 EFW Pipe size | 5.0 - 1219.2 mm |
Swg & Bwg | 12 Swg., 10 Swg., 16 Swg., 14 Swg., 20 Swg., 18 Swg., |
Titanium Gr 5 Pipe Schedule | XS, SCH30, SCH40, XXS, SCH80, SCH120, SCH60, SCH140, STD, SCH10, SCH10S, SCH40S, SCH80, SCH20, SCH5, SCH160 |
Grade 5 Titanium pipe Length | Double Random, Single Random, Standard & Cut length Pipe |
Finish | Polished, AP (Annealed & Pickled), BA (Bright & Annealed), MF, NO.1, NO.4, 2B, BA, HL, 8K, Mirror finish, etc |
Form | Grade 5 Titanium are available in form of Round, Square, Hollow, Rectangular, Hydraulic, Coiled, Straight Pipes, “U” Shape, Pan Cake Coils etc. |
Type of Grade 5 Alloy Pipe | Seamless / ERW/ EFW / Welded / Fabricated / CDW / DOM / CEW Grade 5 Titanium |
Grade 5 Titanium pipe End | Plain End, Beveled End, Treaded Pipe, Screwed ends |
Marking on Titanium Grade 5 Pipe | All ASTM B337 Grade 5 Titanium Pipes are marked as follows: Standard, Grade, OD, Thickness, Length, Heat No. (Or according to the customer’s request.) |
Gr 5 Titanium Alloy Pipes Chemical Composition
Titanium Gr 5 | C | Ti | N | Fe | H | O | V | Al |
0.10 max | 90 min | 0.05 max | 0.40 max | 0.015 max | 0.20 max | 3.5-4.5 | 5.5-6.75 max |
Titanium WERKSTOFF NR. 3.7165 Pipe
Additional Information:
Product Details:
Material | NICKEL ALLOY PIPES |
Usage/Application | Utilities Water |
Grade | UNS N08020 Welded Pipe |
Size/Diameter | 4 to 219mm W. T.: 0.5 to 20mm |
Single Piece Length | 3 meter, 6 meter |
Brand | HEUBACH |
Shape | Nickel are available in form of Round, Square, Hollow, Rectangular, Hydraulic, Coiled, Straight Pipe |
Surface Finishing | Polished,AP (Annealed & Pickled),BA (Bright & Annealed),MF,NO.1,NO.4,2B,BA,HL,8K,Mirror fi |
Product Type | Seamless / ERW/ EFW / Welded / Fabricated / CDW / DOM / CEW Hastelloy |
Country of Origin | Made in India |
HEUBACH INTERNATIONAL holds expertise in supplying and trading wide array of Incoloy Alloy 20 Pipes that are durable in nature and have wide applications. Our Alloy 20 ERW Pipes (UNS N08020) are often used in Production of plastics and synthetic fibers, Chemical and petroleum processing equipment, and so on. These Alloy 20 Seamless Pipes is a nickel – chromium – molybdenum stainless steel alloy that was developed for applications involving acid attack, specifically sulfuric acid. Specifically designed to withstand sulfuric acid, our Alloy 20 Welded Pipes offers excellent corrosion resistance. These Alloy 20 EFW Pipes has excellent resistance to corrosion, crevice corrosion, and pitting. Meanwhile, these Alloy 20 Round Pipes are also being offered in different sizes and shapes to our customers, where we also offer the same at best prices. HEUBACH INTERNATIONAL is one of the well-known stockiest & supplier of these Alloy 20 Square Pipes, which has excellent resistance to general corrosion, pitting, and crevice corrosion in chemicals containing chlorides and sulfuric, phosphoric, and nitric acids. Our Alloy 20 Rectangular Pipes also contains niobium for stabilization against sensitization and resultants inter – granular corrosion. Our Alloy 20 Electropolish Pipes combines excellent corrosion resistance by means of elevated mechanical properties and relatively easy fabrication. Although originally designed for use in sulfuric acid related industries, these Alloy 20 Hexagonal Pipes is now a popular choice for a wide variety of industries including the chemical, food, pharmaceutical, and plastics industries.
Alloy 20 Pipes Chemical Composition
Alloy 20 |
Ni |
C |
Mo |
Mn |
Si |
Fe |
Cu |
S |
P |
Cr |
32 – 38 |
0.02 max |
2 – 3 |
1 – 2 |
0.7 max |
Bal |
3 – 4 |
0.005 max |
0.02 max |
19 – 21 |
Alloy 20 Pipe Mechanical Properties
Density |
Melting Point |
Yield Strength (0.2%Offset) |
Tensile Strength |
Elongation |
8.1 g/cm3 |
1443 °C (2430 °F) |
Psi – 35000 , MPa – 241 |
Psi – 80000 , MPa – 551 |
30 % |
Equivalent Grades for 20 Alloy Pipe
STANDARD |
UNS |
WERKSTOFF NR. |
AFNOR |
EN |
JIS |
BS |
GOST |
Alloy 20 |
N08020 |
2.4660 |
Z2NCUD31-20AZ |
NiCr20CuMo |
– |
– |
– |
Alloy 20 Seamless / Welded Pipes Application Industries
Additional Information: