Heubach International
Heubach International
Girgaon, Mumbai, Maharashtra
GST No. 27AEWPJ4118C1ZH
TrustSEAL Verified
Call 08048549403 91% Response Rate
SEND EMAIL

HIGH NICKEL SHEET & PLATES

Ready Stock of Pure Nickel Hot Rolled Plate, manufacturers of Nickel Shim Sheet, Special price for Pure Nickel 4mm Thick Plate, importer of Pure Nickel Plate Material in India, Check Nickel Battery Strip Price List

These attributes, combined along with good weldability properties, make thepure nickel sheethighly fabricable.pure nickel tapemaintains an extreme tensile strength and thepure nickel stripsalso maintains durability at high temperatures. Although theNickel Clad Platetends to be readily soluble in dilute acids, but the sameNickel Cold Rolled Plateis not affected by alkalis.

High purityNickel Stripcan be used in applications involving industries such as electronic and aerospace, for anodes and cathodes, chemical and food processing equipment, caustics evaporators and heat shields.nickel alloy plate suppliers in Chennairecommend the use of pure nickel in the production of Storage batteries, or nickel alloyed batteries e.g. nickel- cadmium and nickel- metal hydride based batteries. SuchNickel Strips For Battery Packsbatteries are possible to rechargeable and these batteries can be used for devices such as mobile phones, personal stereo equipment and the like.

In comparison to nickel alloys, commerciallyPure Nickel Alloy Steel Platehas high electrical conductivity, a high Curie temperature along with good magneto strictive properties. Which is whyNi Alloy Shim Stockcould be used in the manufacture of several products such as electronic lead wires, battery components, thyratrons and sparking electrodes.18650 Nickel Stripalso has good thermal conductivity, which would mean that thenickel alloy platecould be used in the production of heat exchangers in corrosive environments.

Types of Inconel 625 Plate

  • 625 Inconel Plate
  • ASTM B443 Alloy 625 Sheet
  • UNS N06625 Inconel 625 Foil
  • Alloy Inconel 625 Coil
  • ASTM B443 Alloy 625 Strip
  • Alloy Inconel 625 Strip Tape
  • 625 Inconel Shim Sheet
  • ASTM B443 Alloy 625 Perforated Sheet
  • UNS N06625 Inconel 625 Chequered Plate
  • Alloy 625 Nickel Clad Plate
  • Alloy Inconel 625 Shim Stock
  • Inconel 625 Superalloy Mesh Plate
  • 2.4856 Inconel 625 Hot Rolled Plate
  • Inconel 625 Din 2.4856 Cold Rolled Sheet
  • Inconel Alloy 625 Checker Plate

Titanium GR 9 Sheets

Titanium GR 9 Sheets
  • Titanium GR 9 Sheets
  • Titanium GR 9 Sheets
  • Titanium GR 9 Sheets
  • Titanium GR 9 Sheets
  • Titanium GR 9 Sheets
  • Titanium GR 9 Sheets
  • Titanium GR 9 Sheets
  • Titanium GR 9 Sheets
  • Titanium GR 9 Sheets
  • Titanium GR 9 Sheets
Get Best Quote
Approx. Price: Rs 3,100 / KgGet Latest Price
Product Brochure

Product Details:

Minimum Order Quantity3100 Kg
Material GradeTitanium Gr 9 Sheets
Grade StandardTITANIUM SHEETS
MaterialTitanium Gr 9 Sheets
Size0.1 MM TO 200 MM
GradeGR 9
ShapeRECTANGULAR,SQUARE,ROUND
BrandHEUBACH

HEUBACH INTERNATIONAL has to trustworthy stock of the prime quality of Titanium Gr 9 Sheets & Plates  that we have supplied around the world. This product is a profoundly versatile nature. Hence, they are suitable for any kind of modification that is to be done as per the requirements of our customers. It can be related to its size, dimension, shape, pattern, finish works, thickness, etc. However, they are widely utilized in the making of some planes and flight body parts. 

But with pocket-friendly nature, it also has access to the household or domestic uses. Titanium Gr 9 Sheets & Plates can be availed via variant hardness ranges as hard, soft, half-hard, quarter-hard, spring-hard, etc. Also, it comes in a diverse range of types like plain sheets, shim sheets, chequered plates, flats, etc. Besides, it also upholds the assortment of finishing works as hot rolled plates, cold rolled sheets, 2B, 2D, BA, SATIN, etc.            

Grade 9 has large applications in the sugar industries, oil & gas industries, petrochemical, and power plant industries. It is effortlessly usable and thus it is also seen in the area of fertilizers, chemical processors, pharmaceuticals, food, and dairy industries. Moreover, they are not left behind in nuclear power plants.

Titanium Gr 9 Sheets & Plates too present the documentations as PMI reports, fumigation test reports, 100% radiography test certificates, 100% pure raw material certificates, chemical as well mechanical analysis reports, etc. The chemical structure of this stainless steel grade is filled with components like carbon, nitrogen, oxygen, hydrogen, titanium, and ferrous iron. Oxygen and iron being the major contributors in the composition give its good oxidizing resistance and hardening qualities

Titanium Gr 9 Sheets and Plates Equivalent Grades

STANDARD

UNS

WNR.

Titanium GR 9

R56320

3.7195

Specification of Titanium Gr 9 Sheets and Plates

Titanium Sheets and Plates Specification : ASTM B265 / ASME SB265
Dimension Standard : JIS, AISI, ASTM, GB, DIN, EN, etc
Width : 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc
Length : 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc
Thickness : 0.3 mm to 120 mm
Form : Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Perforated Sheet, Chequered Plate, Strip, Flats, Blank (Circle), Ring (Flange) etc.
Surface Finishing : Hot rolled plate (HR), Cold rolled sheet (CR),2B, 2D, BA, NO.1, NO.4, NO.8, 8K, mirror, Chequered, embossed, hair line, sand blast, Brush, etching, SATIN (Met with Plastic Coated) etc.

Chemical Composition of Titanium Gr 9 Sheets and Plates

Al

Ti

V

max

max

max

3

95

2.5

Mechanical Properties Of Titanium Gr 9 Sheets and Plates

Element

Hardness Brinell

Hardness Knoop

Hardness Rockwell

Tensile Strength

Yield Strength

Titanium Gr. 9

256

278

24

620 Psi

500 MPa

Request
Callback


Additional Information:

  • Item Code: GR9
  • Production Capacity: 85000
  • Delivery Time: 2 DAYS
  • Packaging Details: We focus on every procedure to assure quality, the package we usually take is pack Titanium Gr 9 Sheets with environmental poly bags, and then in free fumigation wooden cases or wooden plate. Also can accept customized package such as OEM by negotiation. We offers just about everything to meet your pack requirements. Lot of emphasis is placed on the packing and packaging. The Titanium Gr 9 Sheets are packed in wooden corrugated boxes foiled in plastic wraps and bubble wraps. HEUBACH INTERNATIONAL is focusing on to complete requirements and to deliver perfectly suitable solutions to our clients. We pack these product in suitable packing material to protect Bars form any damage in transport. By choosing the fastest way of shipping, we ensure the on-time delivery of orders. We are offering these Bars with convenient doorstep service, proper packing, fast shipping, and at reasonable rates. We are here to provide excellence in minimum time and standards. While packaging we attach some documents and reports along with supply made products that show the quality of our offered range of products. The packaging of product is done by big bundles with the individual wrapping of plastic film which protects from contaminations.
Yes! I am Interested

Titanium Gr 5 Sheets

Titanium Gr 5 Sheets
  • Titanium Gr 5 Sheets
  • Titanium Gr 5 Sheets
  • Titanium Gr 5 Sheets
  • Titanium Gr 5 Sheets
  • Titanium Gr 5 Sheets
  • Titanium Gr 5 Sheets
  • Titanium Gr 5 Sheets
  • Titanium Gr 5 Sheets
  • Titanium Gr 5 Sheets
  • Titanium Gr 5 Sheets
  • Titanium Gr 5 Sheets
Get Best Quote
Approx. Price: Rs 3,000 / KgGet Latest Price
Product Brochure

Product Details:

Minimum Order Quantity3000 Kg
Material GradeTitanium Gr 5 Sheets
Grade StandardTitanium Gr 5 Sheets
Thickness0.1 MM TO 200 MM
MaterialTitanium Gr 5 Sheets
Size0.1 MM TO 200 MM
CertificationTitanium Gr 5 Sheets
Usage/Application- Off-Shore Oil Drilling Companies - Power Generation - Petrochemicals - Gas Processing - Specialty

Grade 5 sheets of steel are available in variant tempers to work with cold-rolled as well. This product is rich in a very rare chemical component named as vanadium. Hence, it has such excellent hardening and stress proofing attributes. Besides this, they are also comprised of the components like titanium, aluminium, hydrogen, nitrogen, carbon, and iron. This chemical make-up has nice temperature tolerance. The melting point commonly reaches to 1660 degrees Celsius (or 3020 degrees Fahrenheit). In addition to this, they also have great numbers of thermal expansion and modulus of elasticity.

We maintain the supreme quality of Titanium Gr 5 Sheets & Plates at HEUBACH INTERNATIONAL This is amongst the most common and often used titanium grade. This product range has incredible strength with the added compounds of aluminium. They are light weighted and anti-corrosive nature. Hence, these Steel have been exceedingly demanding applications.

It has the perfect firmness and thermal as well as electrical conductivity properties. This product is also good to go with heat treatment works. They show off splendid properties of accessibility, weldability, malleability, and flexibility.      

Specifications

:

ASTM / ASME SB265

Size

:

1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm

Thickness

:

0.1mm to 12 mm Thk

Form

:

Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip, Flats, Blank (Circle), Ring (Flange)

Finish

:

Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)

Hardness

:

Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc.

Titanium Gr 5 Plate, Sheet & Coil Chemical Composition

Grade

Ti

C

Fe

H

N

O

Al

V

Ti Grade5

90 min

0.25 max

0.2 max

6 min

4 min

Titanium Gr 5 Sheets, Plates & Coils Mechanical Properties

Element

Density

Melting Point

Tensile Strength

Yield Strength (0.2%Offset)

Elongation

Titanium Gr. 5

4.43 g/cm3

1632 °C (2970 °F)

Psi – 138000 , MPa – 950

Psi – 128000 , MPa – 880

14 %

Request
Callback


Additional Information:

  • Item Code: GR5
  • Production Capacity: 80000
  • Delivery Time: 2 DAYS
  • Packaging Details: We focus on every procedure to assure quality, the package we usually take is pack Titanium Gr 5 Sheets with environmental poly bags, and then in free fumigation wooden cases or wooden plate. Also can accept customized package such as OEM by negotiation. We offers just about everything to meet your pack requirements. Lot of emphasis is placed on the packing and packaging. The Titanium Gr 5 Sheets are packed in wooden corrugated boxes foiled in plastic wraps and bubble wraps. HEUBACH INTERNATIONAL is focusing on to complete requirements and to deliver perfectly suitable solutions to our clients. We pack these product in suitable packing material to protect Bars form any damage in transport. By choosing the fastest way of shipping, we ensure the on-time delivery of orders. We are offering these Bars with convenient doorstep service, proper packing, fast shipping, and at reasonable rates. We are here to provide excellence in minimum time and standards. While packaging we attach some documents and reports along with supply made products that show the quality of our offered range of products. The packaging of product is done by big bundles with the individual wrapping of plastic film which protects from contaminations.
Yes! I am Interested

Titanium Grade 2 Sheet

Titanium Grade 2 Sheet
  • Titanium Grade 2 Sheet
  • Titanium Grade 2 Sheet
  • Titanium Grade 2 Sheet
  • Titanium Grade 2 Sheet
  • Titanium Grade 2 Sheet
  • Titanium Grade 2 Sheet
  • Titanium Grade 2 Sheet
  • Titanium Grade 2 Sheet
  • Titanium Grade 2 Sheet
  • Titanium Grade 2 Sheet
  • Titanium Grade 2 Sheet
Get Best Quote
Approx. Price: Rs 2,500 / KgGet Latest Price
Product Brochure

Product Details:

Minimum Order Quantity2500 Kg
Material GradeTitanium Grade 2 Sheet
Grade StandardTitanium Grade 2 Sheet
Thickness0.1 MM TO 200 MM
MaterialTitanium Grade 2 Sheet
Size0.1 MM TO 200 MM
CertificationTitanium Grade 2 Sheet
Usage/Application- Off-Shore Oil Drilling Companies - Power Generation - Petrochemicals - Gas Processing - Specialty

HEUBACH INTERNATIONAL is the leading manufacturers, suppliers, and exporters of the wider ranges of product that is basically used in many industrial applications. We as a client-focused industry is providing the very good quality of commendable ranges of Titanium Gr 2 Sheets & Plates  As we specialize in providing the Ti Gr2 sheets/plates, our clients can collect the same from us at different specifications and standards and also in customized specifications. We only supply the very good quality of Ti Gr 2 sheets and Ti Gr 2 plates that are crafted using premium quality of Ti Gr2 alloy.

The dimensions in which this Titanium Gr 2 Sheets & Plates are available are AISI, EN, ASME, DIN, ASTM, JIS, and BS. The hardness of the sheets and plates are soft, hard, spring hard, quarter hard and half hard. The forms in which the same is easy to acquire are coils, foils, flats, chequered plates, perforated sheets, shim sheets, plain sheets, etc. The finishes of the same are hot rolled plate, 2b, 2d, BA, No8, SATIN, Cold rolled sheet.

Titanium all grade material including Ti Gr2 or UNS R50400 is the commercially pure alloy that is having titanium of 99%. Each grade material including this one is affecting the design capability and mechanical property. The resistance to corrosion is good. Titanium alloy is light weighted alloy and is having exceptional resistance to corrosion and also it exceeds the resistance to corrosion in many atmospheric conditions. 

Specifications

:

ASTM / ASME SB265

Size

:

1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm

Thickness

:

0.1mm to 12 mm Thk

Form

:

Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip, Flats, Blank (Circle), Ring (Flange)

Finish

:

Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)

Hardness

:

Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc.

Titanium Gr 2 Plate, Sheet & Coil Chemical Composition

Grade

Ti

C

Fe

H

N

O

Al

V

Ti Grade2

99.2 min

0.1 max

0.3 max

0.015 max

0.03 max

0.25 max

Equivalent Grades for Gr 2 Titanium Sheets & Plates

STANDARD

WERKSTOFF NR.

UNS

Titanium Gr. 2

3.7035

R50400

Request
Callback


Additional Information:

  • Item Code: GR2
  • Production Capacity: 90000
  • Delivery Time: 2 DAYS
  • Packaging Details: We focus on every procedure to assure quality, the package we usually take is pack Titanium Grade 2 Sheet with environmental poly bags, and then in free fumigation wooden cases or wooden plate. Also can accept customized package such as OEM by negotiation. We offers just about everything to meet your pack requirements. Lot of emphasis is placed on the packing and packaging. The Titanium Grade 2 Sheet are packed in wooden corrugated boxes foiled in plastic wraps and bubble wraps. HEUBACH INTERNATIONAL is focusing on to complete requirements and to deliver perfectly suitable solutions to our clients. We pack these product in suitable packing material to protect Bars form any damage in transport. By choosing the fastest way of shipping, we ensure the on-time delivery of orders. We are offering these Bars with convenient doorstep service, proper packing, fast shipping, and at reasonable rates. We are here to provide excellence in minimum time and standards. While packaging we attach some documents and reports along with supply made products that show the quality of our offered range of products. The packaging of product is done by big bundles with the individual wrapping of plastic film which protects from contaminations.
Yes! I am Interested

Titanium Gr 1 Sheets

Titanium Gr 1 Sheets
  • Titanium Gr 1 Sheets
  • Titanium Gr 1 Sheets
  • Titanium Gr 1 Sheets
  • Titanium Gr 1 Sheets
  • Titanium Gr 1 Sheets
  • Titanium Gr 1 Sheets
  • Titanium Gr 1 Sheets
  • Titanium Gr 1 Sheets
  • Titanium Gr 1 Sheets
  • Titanium Gr 1 Sheets
  • Titanium Gr 1 Sheets
Get Best Quote
Approx. Price: Rs 2,200 / KgGet Latest Price
Product Brochure

Product Details:

Minimum Order Quantity2200 Kg
Material GradeTitanium Gr 1 Sheets
Grade StandardTitanium Gr 1 Sheets
Thickness0.1 MM TO 200 MM
MaterialTitanium Gr 1 Sheets
Size0.1 MM TO 200 MM
CertificationTitanium Gr 1 Sheets
Usage/Application- Off-Shore Oil Drilling Companies - Power Generation - Petrochemicals - Gas Processing - Specialty

Titanium Gr 1 Sheets & Plates is one of the commonly used among all available titanium alloy and is also called as the titanium alloys workhorse. Ti Gr 1 plate is one of the most comply utilized alloy worldwide wherein the alpha-beta alloy is termed as the titanium industry workhorse alloy. The annealing temperature of the Ti Gr 1 sheet is ranging from 700-785 deg C. Ti Gr 1 plate is having very good tensile attributes at the ambient temp and that is advantageous for creep resistance to 300 deg C.
Gr 1 sheets are also considered as the usually used Ti sheets and it accounts for over half of the titanium sponge used into the wide-reaching where the product confirms by the means of chemical and mechanical property. Ti Gr 1 plate is having very good strength, good corrosion resistance. Also, it is heat treatable and is used to a temperature ranging to 400 deg C. Today in the global market HEUBACH INTERNATIONAL has become a leader in manufacturing and distributing the premium quality of Titanium Gr 1 Sheets & Plates . In order to meet the demands of our esteem patrons, we are making and supplying the same to them at various specifications, standards, sizes, forms, wall thickness, etc. Considering the national and international product quality standards we too provide the same at custom cut & made specifications as per the sheets & plates drawings we receive. All our ranges of Ti Gr1 sheets & plates are designed by using premium quality of alloy and as per the set production norms. Our sheets/plates confirm industry standards like ASTM, API, and ASME.

Titanium Gr 1 Sheets & Plates are well quality tested to make sure that only premium quality of the same is dispatched from our industry. The tests conducted are pitting corrosion tests, radiography tests, tensile tests, chemical composition tests, ultrasonic tests, micro tests and many more.

 

Titanium Gr 1 Sheets and Plates Equivalent Grades

STANDARD

UNS

WNR.

Titanium GR 1

R50250

3.7025

Specification of Titanium Gr 1 Sheets and Plates

Titanium Sheets and Plates Specification : ASTM B265 / ASME SB265
Dimension Standard : JIS, AISI, ASTM, GB, DIN, EN, etc
Width : 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc
Length : 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc
Thickness : 0.3 mm to 120 mm
Form : Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Perforated Sheet, Chequered Plate, Strip, Flats, Blank (Circle), Ring (Flange) etc.
Surface Finishing : Hot rolled plate (HR), Cold rolled sheet (CR),2B, 2D, BA, NO.1, NO.4, NO.8, 8K, mirror, Chequered, embossed, hair line, sand blast, Brush, etching, SATIN (Met with Plastic Coated) etc.

Chemical Composition of Titanium Gr 1 Sheets and Plates

C

Fe

H

N

O

Ti

0.1

0.2

0.015

0.03

0.18

99.5

Mechanical Properties Of Titanium Gr 1 Sheets and Plates

Grade

Tensile (ksi)

Yield Strength (ksi)

Elongation %

Titanium Gr 1

240

170

24

Request
Callback


Additional Information:

  • Production Capacity: 95000
  • Delivery Time: 2 DAYS
  • Packaging Details: We focus on every procedure to assure quality, the package we usually take is pack Titanium Gr 1 Sheets with environmental poly bags, and then in free fumigation wooden cases or wooden plate. Also can accept customized package such as OEM by negotiation. We offers just about everything to meet your pack requirements. Lot of emphasis is placed on the packing and packaging. The Titanium Gr 1 Sheets are packed in wooden corrugated boxes foiled in plastic wraps and bubble wraps. HEUBACH INTERNATIONAL is focusing on to complete requirements and to deliver perfectly suitable solutions to our clients. We pack these product in suitable packing material to protect Bars form any damage in transport. By choosing the fastest way of shipping, we ensure the on-time delivery of orders. We are offering these Bars with convenient doorstep service, proper packing, fast shipping, and at reasonable rates. We are here to provide excellence in minimum time and standards. While packaging we attach some documents and reports along with supply made products that show the quality of our offered range of products. The packaging of product is done by big bundles with the individual wrapping of plastic film which protects from contaminations.
Yes! I am Interested

Monel K500 Plate

Monel K500 Plate
  • Monel K500 Plate
  • Monel K500 Plate
  • Monel K500 Plate
  • Monel K500 Plate
  • Monel K500 Plate
  • Monel K500 Plate
  • Monel K500 Plate
  • Monel K500 Plate
  • Monel K500 Plate
  • Monel K500 Plate
Get Best Quote
Approx. Price: Rs 2,800 / KgGet Latest Price
Product Brochure

Product Details:

Minimum Order Quantity2800 Kg
Material GradeMonel K500 Plate
GradeK500
MaterialMonel K500 Plate
Thickness0.1 MM TO 200 MM
Size0.1 MM TO 200 MM
TypeSHEETS AND PLATES
Country of OriginMade in India

Having rich market knowledge, HEUBACH INTERNATIONAL has been able to supply, trade, and manufacture a wide range of Monel Alloy K500 Sheets Plates. A methodically contemporary alloy, our Monel K500 Sheets, is superior performance alloy that paybacks significantly from binary melting in the course of Electro Slag Refining (ESR) method, which ensures the highest and cleanest quality of material is delivered. These Monel K500 Plates is used for sea water impellers and pump shafts, in addition to being used in the oil well industries for valve trim and other parts. When in the age – hard-bitten form, Monel K500 Coils (UNS N05500) has a better tendency in the direction of SCC in some atmospheres than Monel 400 Coils. Meanwhile, these Monel K500 Slatting Coils are also being offered in different sizes and shapes to our customers. Monel K500 Perforated Coils is a high – chromium nickel alloy having excellent resistance to many corrosive aqueous media and high temperature atmospheres. These Alloy K500 Plates has the highest chromium content (29 % Cr) among nickel alloys suitable for fabrication of pressure equipment, which confers exceptional resistance to oxidizing media. Alloy K500 Coils are known as high performance alloys, and can be formed in different shapes, which also have good creep and oxidation resistance. In addition to its corrosion resistance, these Alloy K500 Slatting has high strength, good metallurgical stability and favorable fabrication characteristics.

Specifications

:

ASTM / ASME SB 127

Size

:

1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm

Thickness

:

0.1mm to 12 mm Thk

Form

:

Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip, Flats, Blank, Ring 

Finish

:

Hot rolled plate, Cold rolled sheet , 2B, 2D, BA NO(8), SATIN 

Hardness

:

Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc.

Monel K500 Plate, Sheet & Coil Chemical Composition

Grade

C

Mn

Si

S

Cu

Fe

Ni

Monel K500

0.25 max

1.5 max

0.5 max

0.010 max

27.00 – 33.00

0.5 – 2

63.00 min

We at HEUBACH INTERNATIONAL provide Manufacturer TC in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like.

 

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Request
Callback


Additional Information:

  • Item Code: K500
  • Production Capacity: 95000
  • Delivery Time: 2 DAYS
  • Packaging Details: We focus on every procedure to assure quality, the package we usually take is pack Monel K500 Plate with environmental poly bags, and then in free fumigation wooden cases or wooden plate. Also can accept customized package such as OEM by negotiation. We offers just about everything to meet your pack requirements. Lot of emphasis is placed on the packing and packaging. The Monel K500 Plate are packed in wooden corrugated boxes foiled in plastic wraps and bubble wraps. HEUBACH INTERNATIONAL is focusing on to complete requirements and to deliver perfectly suitable solutions to our clients. We pack these product in suitable packing material to protect Bars form any damage in transport. By choosing the fastest way of shipping, we ensure the on-time delivery of orders. We are offering these Bars with convenient doorstep service, proper packing, fast shipping, and at reasonable rates. We are here to provide excellence in minimum time and standards. While packaging we attach some documents and reports along with supply made products that show the quality of our offered range of products. The packaging of product is done by big bundles with the individual wrapping of plastic film which protects from contaminations.
Yes! I am Interested

Monel 400 Plates

Monel 400 Plates
  • Monel 400 Plates
  • Monel 400 Plates
  • Monel 400 Plates
  • Monel 400 Plates
  • Monel 400 Plates
  • Monel 400 Plates
  • Monel 400 Plates
  • Monel 400 Plates
  • Monel 400 Plates
  • Monel 400 Plates
Get Best Quote
Approx. Price: Rs 2,000 / KgGet Latest Price
Product Brochure

Product Details:

Minimum Order Quantity2000 Kg
Material GradeMonel 400 Plates
Grade400
MaterialMonel 400 Plates
Thickness0.1 MM TO 200 MM
Size0.1 MM TO 200 MM
TypeSHEETS ANS PLATES
Country of OriginMade in India

HEUBACH INTERNATIONAL offers a widespread range of Monel Alloy 400 Sheets Plates and Coils, where it is the responsibility of our group members to inspect these products for any form of finishing defect in that way achieving utmost serenity of the clienteles. Monel 400 Sheets is used for hydrocarbon and chemical processing equipment, marine engineering, shafts, fittings, valves, pumps, fasteners, and heat exchangers. These Monel 400 Plates is used in chemical plant machinery, for the reason that of its excellent corrosion resistance. Monel 400 Coils shows first – rate corrosion resistance and soaring strength in a variety of alkaline and acidic atmospheres and it’s particularly appropriate for reducing environments. The machinability of these Monel 400 Slatting Coils (UNS N04400) is hard as it works-toughens throughout machining. Meanwhile, Monel 400 Perforated Coils are also being offered in different sizes and shapes to our customers. While these Alloy 400 Sheets has a number of advantages, it is far from the perfect metal. The machinability of Alloy 400 Plates is poor because of their tendency to quickly work – harden. These Alloy 400 Coils could also be easily welded, soldered, and brazed, which also has excellent mechanical properties at subzero temperatures. Strength and hardness Alloy 400 Slatting gets increased with only slight impairment of ductility or impact resistance.

Specifications

:

ASTM / ASME SB 127

Size

:

1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm

Thickness

:

0.1mm to 12 mm Thk

Form

:

Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip, Flats, Blank, Ring

Finish

:

Hot rolled plate, Cold rolled sheet, 2B, 2D, BA NO(8), SATIN

Hardness

:

Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc.

Monel 400 Plate, Sheet & Coil Chemical Composition

Grade

C

Mn

Si

S

Cu

Fe

Ni

Monel 400

0.30 max

2.00 max

0.50 max

0.024 max

28.00 – 34.00

2.50 max

63.00 min

We at HEUBACH INTERNATIONAL provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like.

 

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Request
Callback


Additional Information:

  • Item Code: 400MONEL
  • Production Capacity: 85000
  • Delivery Time: 2 DAYS
  • Packaging Details: We focus on every procedure to assure quality, the package we usually take is pack Monel 400 Plates with environmental poly bags, and then in free fumigation wooden cases or wooden plate. Also can accept customized package such as OEM by negotiation. We offers just about everything to meet your pack requirements. Lot of emphasis is placed on the packing and packaging. The Monel 400 Plates are packed in wooden corrugated boxes foiled in plastic wraps and bubble wraps. HEUBACH INTERNATIONAL is focusing on to complete requirements and to deliver perfectly suitable solutions to our clients. We pack these product in suitable packing material to protect Bars form any damage in transport. By choosing the fastest way of shipping, we ensure the on-time delivery of orders. We are offering these Bars with convenient doorstep service, proper packing, fast shipping, and at reasonable rates. We are here to provide excellence in minimum time and standards. While packaging we attach some documents and reports along with supply made products that show the quality of our offered range of products. The packaging of product is done by big bundles with the individual wrapping of plastic film which protects from contaminations.
Yes! I am Interested

Nickel 201 Plate

Nickel 201 Plate
  • Nickel 201 Plate
  • Nickel 201 Plate
  • Nickel 201 Plate
  • Nickel 201 Plate
  • Nickel 201 Plate
  • Nickel 201 Plate
  • Nickel 201 Plate
  • Nickel 201 Plate
  • Nickel 201 Plate
  • Nickel 201 Plate
Get Best Quote
Approx. Price: Rs 3,800 / KgGet Latest Price
Product Brochure

Product Details:

Minimum Order Quantity3800 Kg
GradeNickel 201 Plate
Thickness0.1 MM TO 200 MM
ShapeROUND,SQUARE,RECTANGULAR
Density100 MM TO 2500 MM
Usage/Application- Off-Shore Oil Drilling Companies - Power Generation - Petrochemicals - Gas Processing - Specialty
BrandNickel 201 Plate
Country of OriginMade in India

HEUBACH INTERNATIONAL is one of the well-established stockiest and trader of quality Nickel Alloy 201 Sheets Plates Coils, which resists attack from phosphoric acid and have been successfully used with nitric acid. These Nickel 201 Plates is unaffected by any of the weak bases such as ammonium hydroxide, even in high concentrations and at high temperatures. Our Nickel 201 Coils exposed to stronger bases such as sodium hydroxide at high concentrations and high temperatures will likely experience some etching and cracking, especially with solutions containing chlorides such as sodium hypochlorite. Like steel, these Nickel 201 Slatting Coils is a relatively poor conductor of electricity, with significantly lower electrical conductivity than copper. Other metals in contact with our Nickel 201 Perforated Coils, particularly in a damp or acidic environment, may suffer galvanic corrosion even though the stainless metal may be unaffected. These Alloy 201 Sheets is generally highly resistant to attack from acids, but this quality depends on the kind and concentration of the acid, the surrounding temperature, and the type of steel. Our Alloy 201 Plates is resistant to sulphuric acid at room temperature, even in high concentrations. 

Specifications

:

ASTM / ASME SB 162

Size

:

1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm

Thickness

:

0.1mm to 12 mm Thk

Form

:

Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip, Flats, Blank (Circle), Ring (Flange)

Finish

:

Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)

Hardness

:

Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc.

Nickel 201 Plate, Sheet & Coil Chemical Composition

Grade

C

Mn

Si

S

Cu

Fe

Ni

Nickel 201

0.02 max

0.35 max

0.35 max

0.01 max

0.25 max

0.40 max

99.0 min

Nickel 201 Sheets, Plates & Coils Mechanical Properties

Element

Density

Melting Point

Tensile Strength

Yield Strength (0.2%Offset)

Elongation

Nickel 201

8.9 g/cm3

1446 °C (2635 °F)

Psi – 67000 , MPa – 462

Psi – 21500 , MPa – 148

45 %

Request
Callback


Additional Information:

  • Item Code: 201NICKEL
  • Production Capacity: 80000
  • Delivery Time: 2 DAYS
  • Packaging Details: We focus on every procedure to assure quality, the package we usually take is pack Nickel 201 Plate with environmental poly bags, and then in free fumigation wooden cases or wooden plate. Also can accept customized package such as OEM by negotiation. We offers just about everything to meet your pack requirements. Lot of emphasis is placed on the packing and packaging. The Nickel 201 Plate are packed in wooden corrugated boxes foiled in plastic wraps and bubble wraps. HEUBACH INTERNATIONAL is focusing on to complete requirements and to deliver perfectly suitable solutions to our clients. We pack these product in suitable packing material to protect Bars form any damage in transport. By choosing the fastest way of shipping, we ensure the on-time delivery of orders. We are offering these Bars with convenient doorstep service, proper packing, fast shipping, and at reasonable rates. We are here to provide excellence in minimum time and standards. While packaging we attach some documents and reports along with supply made products that show the quality of our offered range of products. The packaging of product is done by big bundles with the individual wrapping of plastic film which protects from contaminations.
Yes! I am Interested

Nickel 200 Plate

Nickel 200 Plate
  • Nickel 200 Plate
  • Nickel 200 Plate
  • Nickel 200 Plate
  • Nickel 200 Plate
  • Nickel 200 Plate
  • Nickel 200 Plate
  • Nickel 200 Plate
  • Nickel 200 Plate
  • Nickel 200 Plate
  • Nickel 200 Plate
  • Nickel 200 Plate
Get Best Quote
Approx. Price: Rs 4,500 / KgGet Latest Price
Product Brochure

Product Details:

Minimum Order Quantity4500 Kg
GradeNickel 200 Plate
Thickness0.1 MM TO 200 MM
Material GradeNickel 200 Plate
ShapeROUND,SQUARE,RECTANGULAR
Usage/Application- Off-Shore Oil Drilling Companies - Power Generation - Petrochemicals - Gas Processing - Specialty
MaterialNickel 200 Plate

HEUBACH INTERNATIONAL is well-known amongst the customers for providing a quality approved collection of Nickel Alloy 200 Sheets Plates  to the respected patrons. Nickel 200 Sheets (UNS N02200) has a low annealed rigidity and extremely low work – toughening rate. Nickel 200 Plates is used in food handling machinery, general corrosion – resistant structures and parts, caustic solutions, etc. Nickel 200 is chosen with beyond 315 Degree C, for the reason that of its enhanced resistance to “creep.” Nickel 200 Slatting is ferromagnetic and has comparatively low electrical resistivity, which consists of low carbon version of the alloy. By means of Nickel 200 Perforated Coils, the limitations of both alloys are merged into a solitary dual chemistry that outcomes in a distinct alloy by means of the finest features of both. Meanwhile, these Alloy 200 Sheets are also being offered in different sizes and shapes to our customers. Alloy 200 Plates is combined with higher creep properties at temperature and unsullied to form incredibly powerful and ductile. The unsullied of Alloy 200 has smart resistance to oxidization and will be employed in continuous service up to 1140 Degree C provided reducing sulphur gases don’t seem to be gift. The high metal and nickel contents of Alloy 200 Slatting offer comparable corrosion resistance, superior resistance to oxidization.    

Specifications

:

ASTM / ASME SB 168

Size

:

1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm

Thickness

:

0.1mm to 12 mm Thk

Form

:

Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip, Flats, Blank, Ring 

Finish

:

Hot rolled plate, Cold rolled sheet , 2B, 2D, BA NO, SATIN

Hardness

:

Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc.

Nickel 200 Plate, Sheet & Coil Chemical Composition

Grade

C

Mn

Si

S

Cu

Fe

Ni

Nickel 200

0.15 max

0.35 max

0.35 max

0.01 max

0.25 max

0.40 max

99.0 min

We at HEUBACH INTERNATIONAL provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like.          

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc
Request
Callback


Additional Information:

  • Item Code: 200NICKEL
  • Production Capacity: 90000
  • Delivery Time: 2 DAYS
  • Packaging Details: We focus on every procedure to assure quality, the package we usually take is pack Nickel 200 Plate with environmental poly bags, and then in free fumigation wooden cases or wooden plate. Also can accept customized package such as OEM by negotiation. We offers just about everything to meet your pack requirements. Lot of emphasis is placed on the packing and packaging. The Nickel 200 Plate are packed in wooden corrugated boxes foiled in plastic wraps and bubble wraps. HEUBACH INTERNATIONAL is focusing on to complete requirements and to deliver perfectly suitable solutions to our clients. We pack these product in suitable packing material to protect Bars form any damage in transport. By choosing the fastest way of shipping, we ensure the on-time delivery of orders. We are offering these Bars with convenient doorstep service, proper packing, fast shipping, and at reasonable rates. We are here to provide excellence in minimum time and standards. While packaging we attach some documents and reports along with supply made products that show the quality of our offered range of products. The packaging of product is done by big bundles with the individual wrapping of plastic film which protects from contaminations.
Yes! I am Interested

Incoloy 925 Plate

Incoloy 925 Plate
  • Incoloy 925 Plate
  • Incoloy 925 Plate
  • Incoloy 925 Plate
  • Incoloy 925 Plate
  • Incoloy 925 Plate
  • Incoloy 925 Plate
  • Incoloy 925 Plate
  • Incoloy 925 Plate
  • Incoloy 925 Plate
  • Incoloy 925 Plate
  • Incoloy 925 Plate
  • Incoloy 925 Plate
  • Incoloy 925 Plate
Get Best Quote
Approx. Price: Rs 1,700 / KgGet Latest Price
Product Brochure

Product Details:

Minimum Order Quantity1700 Kg
Steel GradeIncoloy 925 Plate
ShapeROUND,SQUARE,RECTANGULAR
Material GradeIncoloy 925 Plate
Plate TypeInconel Plate
Size0.1 MM TO 200 MM
Diameter100 MM TO 2500 MM

HEUBACH INTERNATIONAL offers a widespread range of Alloy 925 Sheets Plates Coils, which has outstanding features such as dimensional accuracy, fine finish, corrosion resistance, and so on. Incoloy 925 Strip Coils has exceptional resistance to pitting, general corrosion, stress – corrosion cracking and crevice corrosion in many aqueous atmospheres counting those containing chlorides and sulfides. These Incoloy 925 Slim Coils is used in a variety of different applications where high strength and corrosion resistance in sour gas environments is important. Appropriate nickel content in Incoloy 925 Coils offers protection in opposition to stress – corrosion cracking chloride – ion whilst in combination with the additional copper and molybdenum resistance to plummeting chemicals is relished. These Incoloy 925 Plates (UNS N09925) is a nickel based alloy comprising Chromium and Iron as major accompaniments, and also add – on of Titanium, Aluminium, Molybdenum and Copper. Meanwhile, Incoloy 925 Slatting Coils are also being offered in different sizes and shapes to our customers. The resistance of these Incoloy 925 Perforated Coils is developed by the precipitation of the gamma phase through solubilization and aging heat treatment, so as to maintain ductility and toughness at high levels. Conventional machining techniques used for iron based alloys may be used, which protects Inconel 925 Sheets in reducing and oxidizing environment. Titanium and aluminum in these Inconel 925 Plates form part of the precipitation hardening reaction that greatly increases hardness and strength of the alloy.

Specifications

:

ASTM / ASME SB 168

Size

:

1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm

Thickness

:

0.1mm to 12 mm Thk

Form

:

Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip, Flats, Blank (Circle), Ring (Flange)

Finish

:

Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)

Hardness

:

Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc.

Incoloy 925 Plate, Sheet & Coil Chemical Composition

Grade

Ni

Cr

Fe

Si

Mo

Cu

Mn

C

S

Al

Incoloy 925

42 – 46

19.55 – 22.5

22 min

0.5 max

2.5 – 3.5

1.5 – 3.0

1.0 max

0.03 max

0.03 max

0.1 – 0.5

Request
Callback


Additional Information:

  • Item Code: INCONEL925
  • Production Capacity: 80000
  • Delivery Time: 3 DAYS
  • Packaging Details: We focus on every procedure to assure quality, the package we usually take is pack Incoloy 925 Plate with environmental poly bags, and then in free fumigation wooden cases or wooden plate. Also can accept customized package such as OEM by negotiation. We offers just about everything to meet your pack requirements. Lot of emphasis is placed on the packing and packaging. The Incoloy 925 Plate are packed in wooden corrugated boxes foiled in plastic wraps and bubble wraps. HEUBACH INTERNATIONAL is focusing on to complete requirements and to deliver perfectly suitable solutions to our clients. We pack these product in suitable packing material to protect Bars form any damage in transport. By choosing the fastest way of shipping, we ensure the on-time delivery of orders. We are offering these Bars with convenient doorstep service, proper packing, fast shipping, and at reasonable rates. We are here to provide excellence in minimum time and standards. While packaging we attach some documents and reports along with supply made products that show the quality of our offered range of products. The packaging of product is done by big bundles with the individual wrapping of plastic film which protects from contaminations.
Yes! I am Interested

Incoloy 825 Plate

Incoloy 825 Plate
  • Incoloy 825 Plate
  • Incoloy 825 Plate
  • Incoloy 825 Plate
  • Incoloy 825 Plate
  • Incoloy 825 Plate
  • Incoloy 825 Plate
  • Incoloy 825 Plate
  • Incoloy 825 Plate
  • Incoloy 825 Plate
  • Incoloy 825 Plate
  • Incoloy 825 Plate
  • Incoloy 825 Plate
Get Best Quote
Approx. Price: Rs 3,000 / KgGet Latest Price
Product Brochure

Product Details:

Minimum Order Quantity3000 Kg
Steel GradeIncoloy 825 Plate
ShapeROUND,SQUARE,RECTANGULAR
Material GradeIncoloy 825 Plate
Plate TypeInconel Plate
Size0.1 MM TO 200 MM
Diameter100 MM TO 2500 MM

HEUBACH INTERNATIONAL offers a widespread collection of Alloy 825 Sheets Plates and Coils, which are made by using best quality of material. Heavy duty machining machinery and tooling must be used in these Incoloy 825 Slatting Coils to minimalize chatter or work – toughening of the alloy ahead of the cutting. The levels of copper and molybdenum enable our Incoloy 825 Perforated Coils to resist reducing acids and agents. Chemical configuration of these Alloy 825 Plates offer great resistance to several corrosive atmospheres, such as crevice corrosion, pitting, stress – corrosion cracking and inter – granular corrosion. Alloy 825 Coils is used in good temperatures for about 1020 Degree F. Meanwhile, Alloy 825 Slatting Coils are also being offered in different sizes and shapes to our customers. These Alloy 825 Perforated Coils has good mechanical properties from moderate to high temperatures, where conventional machining techniques used for iron based alloys may be used. Incoloy UNS N08825 Sheets is especially resistant to sulfuric and phosphoric acids, which further has good mechanical performance in both room temperature and up to 550 Degree C. These Incoloy 825 Sheets is stabilized annealed at the mill to resist inter – granular corrosion as – welded, where tooling should be such as to allow for liberal clearances and radii. The outstanding property of Nickel-Alloy 825 Coils is its corrosion resistance. We also offer these Nickel-Alloy 825 Plates in best possible prices.

Specifications

:

ASTM / ASME SB 424

Size

:

1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm

Thickness

:

0.1mm to 12 mm Thk

Form

:

Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip, Flats, Blank (Circle), Ring (Flange)

Finish

:

Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)

Hardness

:

Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc.

EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Incoloy 825 Plate, Sheet & Coil Chemical Composition

Grade

C

Mn

Si

S

Cu

Fe

Ni

Cr

Al

Ti

825

0.05 max

1.00 max

0.5 max

0.03 max

1.50 – 3.00

22.00 min

38.00 – 46.00

19.50 – 23.50

0.02 max

0.06 – 1.20

 

Request
Callback


Additional Information:

  • Item Code: INCONEL825
  • Production Capacity: 85000
  • Delivery Time: 2 DAYS
  • Packaging Details: We focus on every procedure to assure quality, the package we usually take is pack Incoloy 825 Plate with environmental poly bags, and then in free fumigation wooden cases or wooden plate. Also can accept customized package such as OEM by negotiation. We offers just about everything to meet your pack requirements. Lot of emphasis is placed on the packing and packaging. The Incoloy 825 Plate are packed in wooden corrugated boxes foiled in plastic wraps and bubble wraps. HEUBACH INTERNATIONAL is focusing on to complete requirements and to deliver perfectly suitable solutions to our clients. We pack these product in suitable packing material to protect Bars form any damage in transport. By choosing the fastest way of shipping, we ensure the on-time delivery of orders. We are offering these Bars with convenient doorstep service, proper packing, fast shipping, and at reasonable rates. We are here to provide excellence in minimum time and standards. While packaging we attach some documents and reports along with supply made products that show the quality of our offered range of products. The packaging of product is done by big bundles with the individual wrapping of plastic film which protects from contaminations.
Yes! I am Interested

Incoloy 800 Plates

Incoloy 800 Plates
  • Incoloy 800 Plates
  • Incoloy 800 Plates
  • Incoloy 800 Plates
  • Incoloy 800 Plates
  • Incoloy 800 Plates
  • Incoloy 800 Plates
  • Incoloy 800 Plates
  • Incoloy 800 Plates
  • Incoloy 800 Plates
  • Incoloy 800 Plates
  • Incoloy 800 Plates
Get Best Quote
Approx. Price: Rs 2,700 / KgGet Latest Price
Product Brochure

Product Details:

Minimum Order Quantity2700 Kg
Steel GradeIncoloy 800 Plates
ShapeROUND,SQUARE,RECTANGULAR
Material GradeIncoloy 800 Plates
Plate TypeInconel Plate
Size0.1 MM TO 200 MM
Diameter100 MM TO 2500 MM

HEUBACH INTERNATIONAL offers an extensive quality collection of Alloy 800 / 800H / 800HT Sheets Plates and Coils, where our offered collection is confirmed to be in obedience by means of the international quality standards. Incoloy 800 Sheets is a nickel – iron – chromium alloy by means of good resistance to oxidation, carburization at high temperatures and moderate strength. In power generation, re – heater and super – heater tubing has engaged these Incoloy 800 Plates. Meanwhile, these Incoloy 800 Coils are resistance to protracted exposure to high temperatures. Incoloy 800H Sheets is very much serviceable as it upholds a stable construction, even when unprotected to soaring temp. Meanwhile, these Incoloy 800H Plates are also being offered in different sizes and shapes to our customers. Incoloy 800HT Coils perform well in sodium salt and other molten salt environments, with stress corrosion cracking resistance surpassing standard austenitic stainless steels. Incoloy 800 Slatting Coils has excellent resistant to oxidation and carburization in high temperature environments. Incoloy 800HT Perforated Coils has a restricted chemistry, within the limits of Incoloy 800H Perforated Coils, and requires a heat treatment of 2100 Degree F (1149 Degree C) minimum. Alloy 800HT Coils is also used for valves, fittings and other components exposed to corrosive attack from 1100 Degree F to 1800 Degree F. Alloy 800 Sheets Plates with a standard anneal is recommended for service below 1100 Degree F (600 Degree C).

Specifications

:

ASTM / ASME SB 409

Size

:

1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm

Thickness

:

0.1mm to 12 mm Thk

Form

:

Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip, Flats, Blank (Circle), Ring (Flange)

Finish

:

Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)

Hardness

:

Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc.

EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Incoloy 800/800H/800HT Plate, Sheet & Coil Chemical Composition

Grade

C

Mn

Si

S

Cu

Fe

Ni

Cr

Al

Ti

800

0.10 max

1.50 max

1.00 max

0.015 max

0.75 max

39.50 min

30.00 – 35.00

19.00 – 23.00

0.15 – 0.60

0.15 – 0.60

Request
Callback


Additional Information:

  • Production Capacity: 90000
  • Delivery Time: 2 DAYS
  • Packaging Details: We focus on every procedure to assure quality, the package we usually take is pack Incoloy 800 Plates with environmental poly bags, and then in free fumigation wooden cases or wooden plate. Also can accept customized package such as OEM by negotiation. We offers just about everything to meet your pack requirements. Lot of emphasis is placed on the packing and packaging. The Incoloy 800 Plates are packed in wooden corrugated boxes foiled in plastic wraps and bubble wraps. HEUBACH INTERNATIONAL is focusing on to complete requirements and to deliver perfectly suitable solutions to our clients. We pack these product in suitable packing material to protect Bars form any damage in transport. By choosing the fastest way of shipping, we ensure the on-time delivery of orders. We are offering these Bars with convenient doorstep service, proper packing, fast shipping, and at reasonable rates. We are here to provide excellence in minimum time and standards. While packaging we attach some documents and reports along with supply made products that show the quality of our offered range of products. The packaging of product is done by big bundles with the individual wrapping of plastic film which protects from contaminations.
Yes! I am Interested

Incoloy 330 Plate

Incoloy 330 Plate
  • Incoloy 330 Plate
  • Incoloy 330 Plate
  • Incoloy 330 Plate
  • Incoloy 330 Plate
  • Incoloy 330 Plate
  • Incoloy 330 Plate
  • Incoloy 330 Plate
  • Incoloy 330 Plate
  • Incoloy 330 Plate
  • Incoloy 330 Plate
  • Incoloy 330 Plate
Get Best Quote
Approx. Price: Rs 3,550 / KgGet Latest Price
Product Brochure

Product Details:

Minimum Order Quantity3550 Kg
Steel GradeIncoloy 330 Plate
ShapeROUND,SQUARE,RECTANGULAR
Material GradeIncoloy 330 Plate
Plate TypeInconel Plate
StandardIncoloy 330 Plate
Size0.1 MM TO 200 MM

HEUBACH INTERNATIONAL offers a widespread collection of Alloy 330 / SS 330 / Ra 330 Sheets, Plates and Coils to the customers, which has some outstanding features such as optimum performance, durable finish and precisely engineered. The high chromium and nickel content of Incoloy 330 Sheets offer excellent resistance to carburization and oxidation. Oxidation resistance and Carburization to approximately 2100 Deg F are improved by the content of silicon of these Incoloy 330 Plates. The austenitic microstructure of Incoloy 330 Coils rests stable throughout long – time exposure to soaring temperature. SS 330 Sheets (UNS N08330) is welded effortlessly by all conventional procedures. Meanwhile, these SS 330 Plates are also being offered in different sizes and shapes to our customers. SS 330 Coils is actually an austenitic, nickel – chromium – iron – silicon alloy that has outstanding resistance to oxidation and carburization up to 2200 Degree F with high strength. Ra 330 Sheets also has excellent anti – corrosion and oxidation properties. With a nickel content of 34 percent to 37 percent, Ra 330 Plates remains highly resistant to both chloride stress corrosion cracking and embrittlement from the precipitation of sigma phase. Slow speeds, positive feeds, sulphureted lubricants and rigid mounts are generally recommended for Ra 330 Coils. Due to controlled chemistry and proprietary heat treatment, Incoloy 330 Slatting Coils outperforms the generic versions. Incoloy 330 Perforated Coils are widely used in furnaces, baking applications, petroleum industry.

Specifications

:

ASTM / ASME SB 168

Size

:

1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm

Thickness

:

0.1mm to 12 mm Thk

Form

:

Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip, Flats, Blank (Circle), Ring (Flange)

Finish

:

Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)

Hardness

:

Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc.

EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Incoloy 330/SS 330/Ra 330 Plate, Sheet & Coil Chemical Composition

Grade

C

Mn

Si

S

Cu

Fe

Ni

Cr

Sn

Pb

330

0.08 max

2.00 max

0.75-1.50

0.03 max

1.00 max

Balance

34.0-37.0

17.0-20.0

0.025

0.005 max

Request
Callback


Additional Information:

  • Production Capacity: 95000
  • Delivery Time: 2 DAYS
  • Packaging Details: We focus on every procedure to assure quality, the package we usually take is pack Incoloy 330 Plate with environmental poly bags, and then in free fumigation wooden cases or wooden plate. Also can accept customized package such as OEM by negotiation. We offers just about everything to meet your pack requirements. Lot of emphasis is placed on the packing and packaging. The Incoloy 330 Plate are packed in wooden corrugated boxes foiled in plastic wraps and bubble wraps. HEUBACH INTERNATIONAL is focusing on to complete requirements and to deliver perfectly suitable solutions to our clients. We pack these product in suitable packing material to protect Bars form any damage in transport. By choosing the fastest way of shipping, we ensure the on-time delivery of orders. We are offering these Bars with convenient doorstep service, proper packing, fast shipping, and at reasonable rates. We are here to provide excellence in minimum time and standards. While packaging we attach some documents and reports along with supply made products that show the quality of our offered range of products. The packaging of product is done by big bundles with the individual wrapping of plastic film which protects from contaminations.
Yes! I am Interested

Inconel 600 Sheet

Inconel 600 Sheet
  • Inconel 600 Sheet
  • Inconel 600 Sheet
  • Inconel 600 Sheet
  • Inconel 600 Sheet
  • Inconel 600 Sheet
  • Inconel 600 Sheet
  • Inconel 600 Sheet
  • Inconel 600 Sheet
  • Inconel 600 Sheet
  • Inconel 600 Sheet
  • Inconel 600 Sheet
  • Inconel 600 Sheet
  • Inconel 600 Sheet
Get Best Quote
Approx. Price: Rs 1,800 / KgGet Latest Price
Product Brochure

Product Details:

Minimum Order Quantity1800 Kg
Material GradeInconel 600 Sheet
MaterialInconel 600 Sheet
ShapeSQUARE, RECTANGLE, ROUND
Size0.1 MM TO 200 MM
Diameter100 MM TO 2500 MM
Usage/Application- Off-Shore Oil Drilling Companies - Power Generation - Petrochemicals - Gas Processing - Specialty
BrandInconel 600 Sheet
Country of OriginMade in India

Inconel 600 is the chromium and nickel-based alloy which is having several alloying elements with good oxidation resistance. And the alloy is most prominently used in the chloride-containing environment. This is the way that it is designed to use in the cryogenic temperature applications. Also, the alloy is providing the best corrosion resistance ability in the inorganic compounds.

The Inconel 600 is also the wider grade of the 600 alloys. However, this is having the high required ranges of the corrosion resistance and heat. With the presence of the different alloying elements, the alloy is having the best resistance to the oxidations and corrosion resistance.

HEUBACH INTERNATIONAL is the trustworthy manufacturer of the wide ranges of the Inconel 600 Sheets & Plates . We are supplying, exporting and importing the superior quality of the sheets and plates to all the clients available all around the globe. The sheets and plates are available in different specifications like surface finish, end finish, dimensions, shapes, sizes, toughness, and length. The sheets and plates are available in the cut made specifications as per the expectations of the clients.

Sheets and plates are used in the industrial applications which are working in the high temperature. However, the sheets and plates are good at working in the pressure applications which are having good strength and high toughness. In addition to this, the sheets and plates are available in many types so that they are used in the applications. 

Specifications

:

ASTM / ASME SB 168

Size

:

1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm

Thickness

:

0.1mm to 12 mm Thk

Form

:

Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip, Flats, Blank, Ring

Finish

:

Hot rolled plate , Cold rolled sheet , 2B, 2D, BA NO(8), SATIN 

Hardness

:

Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc.

Inconel 600 Plate, Sheet & Coil Chemical Composition

Grade

C

Mn

Si

S

Cu

Fe

Ni

Cr

Inconel 600

0.15 max

1.00 max

0.50 max

0.015max

0.50 max

6.00 – 10.00

72.00 min

14.00 – 17.00

We at HEUBACH INTERNATIONAL provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Request
Callback


Additional Information:

  • Item Code: 600Inconel
  • Production Capacity: 95000
  • Delivery Time: 3 DAYS
  • Packaging Details: We focus on every procedure to assure quality, the package we usually take is pack Inconel 600 Sheet with environmental poly bags, and then in free fumigation wooden cases or wooden plate. Also can accept customized package such as OEM by negotiation. We offers just about everything to meet your pack requirements. Lot of emphasis is placed on the packing and packaging. The Inconel 600 Sheet are packed in wooden corrugated boxes foiled in plastic wraps and bubble wraps. HEUBACH INTERNATIONAL is focusing on to complete requirements and to deliver perfectly suitable solutions to our clients. We pack these product in suitable packing material to protect Bars form any damage in transport. By choosing the fastest way of shipping, we ensure the on-time delivery of orders. We are offering these Bars with convenient doorstep service, proper packing, fast shipping, and at reasonable rates. We are here to provide excellence in minimum time and standards. • Packing is quite important especially in a case of international shipments in which consignment pass through various channels to reach the ultimate destination, so we put special concern regarding packaging. • We pack our goods in numerous ways based on the products. We pack our products in multiple ways, such as, o Shrink-wrapped o Carton boxes o Wooden pallets o Wooden boxes o Wooden crates
Yes! I am Interested

Inconel 601 Plates

Inconel 601 Plates
  • Inconel 601 Plates
  • Inconel 601 Plates
  • Inconel 601 Plates
  • Inconel 601 Plates
  • Inconel 601 Plates
  • Inconel 601 Plates
  • Inconel 601 Plates
  • Inconel 601 Plates
  • Inconel 601 Plates
  • Inconel 601 Plates
Get Best Quote
Approx. Price: Rs 2,100 / KgGet Latest Price
Product Brochure

Product Details:

Minimum Order Quantity2100 Kg
Steel GradeInconel 601 Plates
ShapeROUND,SQUARE,RECTANGULAR
Material GradeInconel 601 Plates
StandardInconel 601 Plates
Size0.1 MM TO 200 MM
Product TypeSHEET SND PLATES
Usage/Application- Off-Shore Oil Drilling Companies - Power Generation - Petrochemicals - Gas Processing - Specialty
BrandInconel 601 Plates
Country of OriginMade in India

HEUBACH INTERNATIONAL offers an extensive collection of Alloy 601 Sheets Plates and Coils, which are extensively appropriate for dissimilar purposes in dissimilar industries. Inconel 601 Plates is useful for chemical progression machinery such as process heaters, condenser tubes and combustor components. Inconel 601 Coils has been effectively used in the following uses, such as annealing, sintering muffles, retorts and copper brazing. Inconel 601 Slatting Coils has excellent resistance to aqueous corrosion. Inconel 601 Perforated Coils has excellent hot corrosion resistance under oxidizing environments. Alloy 601 Coils stands out because of its resistance to soaring temperature oxidation, where we also offer the same at industry leading prices. Alloy 601 Slatting Coils has excellent oxidation resistance and also has good resistance to carburizing but should not be used in atmospheres containing sulfur content. Alloy 601 Perforated Coils must be cooled as rapidly as possible through the range 1400 Degree F to 1000 Degree F. Nickel-Alloy 601 Sheets is often used for thermal reactors in exhaust system of petrol engines. Nickel-Alloy 601 Plates is also used for combustor components and catalyst grid supports in equipment for nitric acid production. These Nickel-Alloy 601 Coils are also used in baskets, trays, and fixtures for heat – treating equipment. Heavy lubricants Inconel UNS N06601 Sheets Plates are used for tapping, boring, broaching or drilling. Meanwhile, these Alloy 601 Plates are also being offered in different sizes and shapes to our customers.

Specifications

:

ASTM / ASME SB 168

Size

:

1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm

Thickness

:

0.1mm to 12 mm Thk

Form

:

Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip, Flats, Blank (Circle), Ring (Flange)

Finish

:

Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)

Hardness

:

Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc.
EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc  

Inconel 601 Plate, Sheet & Coil Chemical Composition

Grade

C

Mn

Si

S

Cu

Fe

Ni

Cr

Inconel 601

0.10 max

1.00 max

0.50 max

0.015max

1.00 max

Balance

58.0 – 63.0

21.0 – 25.0

 

Request
Callback


Additional Information:

  • Item Code: 601Inconel
  • Production Capacity: 90000
  • Delivery Time: 2 DAYS
  • Packaging Details: We focus on every procedure to assure quality, the package we usually take is pack Inconel 601 Plates with environmental poly bags, and then in free fumigation wooden cases or wooden plate. Also can accept customized package such as OEM by negotiation. We offers just about everything to meet your pack requirements. Lot of emphasis is placed on the packing and packaging. The Inconel 601 Plates are packed in wooden corrugated boxes foiled in plastic wraps and bubble wraps. HEUBACH INTERNATIONAL is focusing on to complete requirements and to deliver perfectly suitable solutions to our clients. We pack these product in suitable packing material to protect Bars form any damage in transport. By choosing the fastest way of shipping, we ensure the on-time delivery of orders. We are offering these Bars with convenient doorstep service, proper packing, fast shipping, and at reasonable rates. We are here to provide excellence in minimum time and standards. • Packing is quite important especially in a case of international shipments in which consignment pass through various channels to reach the ultimate destination, so we put special concern regarding packaging. • We pack our goods in numerous ways based on the products. We pack our products in multiple ways, such as, o Shrink-wrapped o Carton boxes o Wooden pallets o Wooden boxes o Wooden crates
Yes! I am Interested

Inconel 625 Plate

Inconel 625 Plate
  • Inconel 625 Plate
  • Inconel 625 Plate
  • Inconel 625 Plate
  • Inconel 625 Plate
  • Inconel 625 Plate
  • Inconel 625 Plate
  • Inconel 625 Plate
  • Inconel 625 Plate
  • Inconel 625 Plate
  • Inconel 625 Plate
  • Inconel 625 Plate
Get Best Quote
Approx. Price: Rs 2,500 / KgGet Latest Price
Product Brochure

Product Details:

Minimum Order Quantity2500 Kg
Steel GradeInconel 625 Plate
ShapeROUND,SQUARE,RECTANGULAR
Material GradeInconel 625 Plate
Size0.1 MM TO 200 MM
Diameter100 MM TO 2500 MM
Usage/Application- Off-Shore Oil Drilling Companies - Power Generation - Petrochemicals - Gas Processing - Specialty
BrandInconel 625 Plate
Country of OriginMade in India

HEUBACH INTERNATIONAL offers an extensive collection of Alloy 625 Sheets Plates and Coils, which is furnished by means of sophisticated machines and techniques. Inconel 625 Sheets as well validates significant protection in opposition to oxidation and corrosion. The exceptional toughness and strength of Inconel 625 Plates in the temperature series cryogenic to 1093 Deg C are derivative mainly from the solid solution possessions of the refractory metals, molybdenum and columbium, in chromium – nickel matrix. Inconel 625 Coils has exceptional fatigue power and stress-corrosion cracking resistance to chloride ions. Inconel 625 Slatting Coils has outstanding weldability, and are often used in nuclear reactors and pollution-control machinery. Meanwhile, these Inconel 625 Perforated Coils are also being offered in different sizes and shapes to our customers. Alloy 625 Plates is particularly useful in situations where oxidation resistance and avoidance of pitting is required. The strength of Alloy 625 Coils can be enhanced by heat treatment. The high molybdenum content makes Alloy 625 Slatting Coils very resistant to pitting and crevice corrosion. Major markets for Alloy 625 Perforated Coils include: Nuclear, Marine, Aerospace and Chemical Processing. The outstanding and versatile corrosion resistance of Inconel UNS N06625 Sheets Plates under a wide range of temperatures and pressures is a primary reason for its wide acceptance in the chemical processing field. Nickel Alloy 625 Sheets is often used in Aircraft ducting systems, Jet engine exhaust systems and Engine thrust – reverser systems.

Specifications

:

ASTM / ASME SB 168

Size

:

1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm

Thickness

:

0.1mm to 12 mm Thk

Form

:

Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip, Flats, Blank (Circle), Ring (Flange)

Finish

:

Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)

Hardness

:

Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc.
EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Inconel 625 Plate, Sheet & Coil Chemical Composition

Grade

C

Mn

Si

S

Cu

Fe

Ni

Cr

Inconel 625

0.10 max

0.50 max

0.50 max

0.015max

5.0 max

58.0 min

20.0 – 23.0

Request
Callback


Additional Information:

  • Item Code: 625Inconel
  • Production Capacity: 80000
  • Delivery Time: 2 DAYS
  • Packaging Details: We focus on every procedure to assure quality, the package we usually take is pack Inconel 625 Plate with environmental poly bags, and then in free fumigation wooden cases or wooden plate. Also can accept customized package such as OEM by negotiation. We offers just about everything to meet your pack requirements. Lot of emphasis is placed on the packing and packaging. The Inconel 625 Plate are packed in wooden corrugated boxes foiled in plastic wraps and bubble wraps. HEUBACH INTERNATIONAL is focusing on to complete requirements and to deliver perfectly suitable solutions to our clients. We pack these product in suitable packing material to protect Bars form any damage in transport. By choosing the fastest way of shipping, we ensure the on-time delivery of orders. We are offering these Bars with convenient doorstep service, proper packing, fast shipping, and at reasonable rates. We are here to provide excellence in minimum time and standards. • Packing is quite important especially in a case of international shipments in which consignment pass through various channels to reach the ultimate destination, so we put special concern regarding packaging. • We pack our goods in numerous ways based on the products. We pack our products in multiple ways, such as, o Shrink-wrapped o Carton boxes o Wooden pallets o Wooden boxes o Wooden crates
Yes! I am Interested

Inconel 718 Plates

Inconel 718 Plates
  • Inconel 718 Plates
  • Inconel 718 Plates
  • Inconel 718 Plates
  • Inconel 718 Plates
  • Inconel 718 Plates
  • Inconel 718 Plates
  • Inconel 718 Plates
  • Inconel 718 Plates
  • Inconel 718 Plates
  • Inconel 718 Plates
  • Inconel 718 Plates
Get Best Quote
Approx. Price: Rs 2,200 / KgGet Latest Price
Product Brochure

Product Details:

Minimum Order Quantity2200 Kg
Steel GradeInconel 718 Plates
ShapeROUND,SQUARE,RECTANGULAR
Material GradeInconel 718 Plates
Size0.1 MM TO 200 MM
Diameter100 MM TO 2500 MM
Usage/Application- Off-Shore Oil Drilling Companies - Power Generation - Petrochemicals - Gas Processing - Specialty
BrandInconel 718 Plates
Country of OriginMade in India

HEUBACH INTERNATIONAL offers a wide range of Alloy 718 Sheets, Plates and Coils to the customers, which is extensively demanded for its sturdiness and durability. Inconel 718 Sheets has advanced power than Inconel 718 Sheets, which further can be willingly age hardened and worked. Inconel 718 Strip Coils is a nickel-chromium and precipitation – hardenable alloy comprising also noteworthy quantities of iron, molybdenum and niobium together by means of smaller amounts of titanium and aluminum. Inconel 718 Coils shows very high tensile, yield, and creep – rupture features at soaring temperatures. Inconel 718 Plates (UNS N07718) has outstanding creep – rupture potency at temperatures till 1300 Deg F. To perform this function, Inconel 718 Slim Coils must first be solution heat treated (solution annealed is a synonymous term). However, this treatment in Alloy 718 Slatting Coils has a tendency to produce notch brittleness in stress rupture. Meanwhile, these Inconel 718 Slatting Coils are also being offered in different sizes and shapes to our customers. Welding of Inconel 718 Perforated Coils in the aged condition will cause the formation of a softened heat – affected zone.   

Specifications

:

ASTM / ASME SB 670

Size

:

1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm

Thickness

:

0.1mm to 12 mm Thk

Form

:

Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip, Flats, Blank (Circle), Ring (Flange)

Finish

:

Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)

Hardness

:

Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc.

Inconel 718 Plate, Sheet & Coil Chemical Composition

Grade

C

Mn

Si

S

Cu

Fe

Ni

Cr

Inconel 718

0.08 max

0.35 max

0.35 max

0.015max

0.30 max

50.00 – 55.00

17.00 – 21.00

Alloy 718 Sheets, Plates & Coils Mechanical Properties

Element

Density

Melting Point

Tensile Strength

Yield Strength (0.2%Offset)

Elongation

Inconel 718

8.2 g/cm3

1350 °C (2460 °F)

Psi – 1,35,000 , MPa – 930

Psi – 75,000 , MPa – 482

45 %

Request
Callback


Additional Information:

  • Item Code: 718Inconel
  • Production Capacity: 85000
  • Delivery Time: 2 DAYS
  • Packaging Details: We focus on every procedure to assure quality, the package we usually take is pack Inconel 718 Plates with environmental poly bags, and then in free fumigation wooden cases or wooden plate. Also can accept customized package such as OEM by negotiation. We offers just about everything to meet your pack requirements. Lot of emphasis is placed on the packing and packaging. The Inconel 718 Plates are packed in wooden corrugated boxes foiled in plastic wraps and bubble wraps. HEUBACH INTERNATIONAL is focusing on to complete requirements and to deliver perfectly suitable solutions to our clients. We pack these product in suitable packing material to protect Bars form any damage in transport. By choosing the fastest way of shipping, we ensure the on-time delivery of orders. We are offering these Bars with convenient doorstep service, proper packing, fast shipping, and at reasonable rates. We are here to provide excellence in minimum time and standards. • Packing is quite important especially in a case of international shipments in which consignment pass through various channels to reach the ultimate destination, so we put special concern regarding packaging. • We pack our goods in numerous ways based on the products. We pack our products in multiple ways, such as, o Shrink-wrapped o Carton boxes o Wooden pallets o Wooden boxes o Wooden crates
Yes! I am Interested

Hastelloy C276 Plates

Hastelloy C276 Plates
  • Hastelloy C276 Plates
  • Hastelloy C276 Plates
  • Hastelloy C276 Plates
  • Hastelloy C276 Plates
  • Hastelloy C276 Plates
  • Hastelloy C276 Plates
  • Hastelloy C276 Plates
  • Hastelloy C276 Plates
  • Hastelloy C276 Plates
  • Hastelloy C276 Plates
  • Hastelloy C276 Plates
  • Hastelloy C276 Plates
  • Hastelloy C276 Plates
Get Best Quote
Approx. Price: Rs 2,300 / KgGet Latest Price
Product Brochure

Product Details:

Minimum Order Quantity2300 Kg
GradeHastelloy C276 Plates
Usage/Application- Off-Shore Oil Drilling Companies - Power Generation - Petrochemicals - Gas Processing - Specialty
BrandHEUBACH
Density100MM TO 2500 MM
ShapeROUND,SQUARE,RECTANGLE
Size/Dimension0.1 MM TO 200 MM
Country of OriginMade in India

HEUBACH INTERNATIONAL domain proficiency has allowed us to come up by means of an outstanding range of Hastelloy Alloy C276 Sheets Plates Coils, which is an anti – galling stainless steel that has excellent wear resistance. Hastelloy C276 Plates has outstanding resistance to pitting, oxidizing and stress – corrosion cracking environments up to 1900 Degree F. Hastelloy C276 Coils have outstanding resistance to pitting, stress corrosion and crevice corrosion cracking. Hastelloy C276 Slatting Coils has excellent machinability, though the alloy work toughens as is correct of the nickel base alloys overall. The high molybdenum and nickel contents in Hastelloy C276 Perforated Coils (UNS N10276) make this nickel steel alloy particularly resistant to crevice corrosion and pitting in reducing atmospheres while chromium content delivers resistance to oxidizing media. Meanwhile, these Alloy C276 Plates are also being offered in customized sizes and shapes to our customers. Temperature solution of these Alloy C276 Coils can be heat treated up to 1800 Degree F (982 Degree C), 1 hour, oil quenched, aged 1325 Degree F (718 Degree C), 16 hours, and then air cooled. In the solution treated condition, Alloy C276 Slatting Coils can be satisfactorily cold drawn and formed. It is somewhat stiffer than stainless steels such as SS 316 and SS 310, and it work hardens rapidly. These Alloy C276 Perforated Coils has uniform corrosion resistance and provides great high – temperature oxidation resistance as well.

Specifications

:

ASTM / ASME SB575

Size

:

1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm

Thickness

:

0.1mm to 12 mm Thk

Form

:

Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip, Flats, Blank (Circle), Ring (Flange)

Finish

:

Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)

Hardness

:

Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc.

EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Hastelloy C276 Plate, Sheet & Coil Chemical Composition

Grade

C

Mn

Si

S

Co

Ni

Cr

Fe

Mo

P

C276

0.010 max

1.00 max

0.08 max

0.03 max

2.50 max

50.99 min*

14.50 – 16.50

4.00 – 7.00

15.00 – 17.00

0.04 max

Request
Callback


Additional Information:

  • Item Code: C276HASTELLOY
  • Production Capacity: 90000
  • Delivery Time: 2 DAYS
  • Packaging Details: We focus on every procedure to assure quality, the package we usually take is pack Hastelloy C276 Plates with environmental poly bags, and then in free fumigation wooden cases or wooden plate. Also can accept customized package such as OEM by negotiation. We offers just about everything to meet your pack requirements. Lot of emphasis is placed on the packing and packaging. The Hastelloy C276 Plates are packed in wooden corrugated boxes foiled in plastic wraps and bubble wraps. HEUBACH INTERNATIONAL is focusing on to complete requirements and to deliver perfectly suitable solutions to our clients. We pack these product in suitable packing material to protect Bars form any damage in transport. By choosing the fastest way of shipping, we ensure the on-time delivery of orders. We are offering these Bars with convenient doorstep service, proper packing, fast shipping, and at reasonable rates. We are here to provide excellence in minimum time and standards. • Packing is quite important especially in a case of international shipments in which consignment pass through various channels to reach the ultimate destination, so we put special concern regarding packaging. • We pack our goods in numerous ways based on the products. We pack our products in multiple ways, such as, o Shrink-wrapped o Carton boxes o Wooden pallets o Wooden boxes o Wooden crates
Yes! I am Interested

Hastelloy C22 Plate

Hastelloy C22 Plate
  • Hastelloy C22 Plate
  • Hastelloy C22 Plate
  • Hastelloy C22 Plate
  • Hastelloy C22 Plate
  • Hastelloy C22 Plate
  • Hastelloy C22 Plate
  • Hastelloy C22 Plate
  • Hastelloy C22 Plate
  • Hastelloy C22 Plate
  • Hastelloy C22 Plate
  • Hastelloy C22 Plate
Get Best Quote
Approx. Price: Rs 2,200 / KgGet Latest Price
Product Brochure

Product Details:

Minimum Order Quantity2200 Kg
GradeHastelloy C22 Plate
Usage/Application- Off-Shore Oil Drilling Companies - Power Generation - Petrochemicals - Gas Processing - Specialty
MaterialHastelloy C22 Plate
BrandHEUBACH
Density100MM TO 2500 MM
ShapeROUND,SQUARE,RECTANGLE

HEUBACH INTERNATIONAL offers a wide-ranging gamut of Hastelloy Alloy C22 Sheets Plates Coils to the esteemed patrons, which has some admirable features to offer such as durable, easy to fit, fine finish, and so on. We also offer these Hastelloy C22 Sheets at market leading rates. These Hastelloy C22 Plates have been used in strict process atmospheres such as those bump into the metal pickling amenities, chemical process industry, flue gas desulfurization scrubbers, nuclear fuel reprocessing, electronics manufacturing, and so on. Hastelloy C22 Coils (UNS N06022) resists the development of grain boundary precipitates in the weld-heat affected region making it appropriate for use in the as – welded form. Meanwhile, these Hastelloy C22 Slatting Coils are also being offered in customized sizes and shapes to our customers. Wrought products of Hastelloy C22 Perforated Coils are supplied in the Mill Annealed (MA) condition, unless otherwise specified. This solution annealing procedure has been designed to optimize the corrosion resistance and ductility of Alloy C22 Sheets. Following all hot forming operations, Alloy C22 Plates should be re – annealed, to restore optimum properties. Alloy C22 Coils should also be re-annealed after any cold forming operations that result in an outer fiber elongation of 7 % or more. Alloy C22 Slatting Coils is stiffer than most austenitic stainless steels, and more energy is required during cold forming. Alloy C22 Perforated Coils also provides guidelines for cold forming, spinning, drop hammering, punching, and shearing.

Specifications

:

ASTM / ASME SB575

Size

:

1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm

Thickness

:

0.1mm to 12 mm Thk

Form

:

Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip, Flats, Blank (Circle), Ring (Flange)

Finish

:

Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN

Hardness

:

Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc.

EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Hastelloy C22 Plate, Sheet & Coil Chemical Composition

Grade

C

Mn

Si

S

Co

Ni

Cr

Fe

Mo

P

C22

0.010 max

0.50 max

0.08 max

0.02 max

2.50 max

50.015 min*

20.00 – 22.50

2.00 – 6.00

12.50 – 14.50

0.02 max

Request
Callback


Additional Information:

  • Item Code: C22HASTELLOY
  • Production Capacity: 95000
  • Delivery Time: 2 DAYS
  • Packaging Details: We focus on every procedure to assure quality, the package we usually take is pack Hastelloy C22 Plate with environmental poly bags, and then in free fumigation wooden cases or wooden plate. Also can accept customized package such as OEM by negotiation. We offers just about everything to meet your pack requirements. Lot of emphasis is placed on the packing and packaging. The Hastelloy C22 Plate are packed in wooden corrugated boxes foiled in plastic wraps and bubble wraps. HEUBACH INTERNATIONAL is focusing on to complete requirements and to deliver perfectly suitable solutions to our clients. We pack these product in suitable packing material to protect Bars form any damage in transport. By choosing the fastest way of shipping, we ensure the on-time delivery of orders. We are offering these Bars with convenient doorstep service, proper packing, fast shipping, and at reasonable rates. We are here to provide excellence in minimum time and standards. • Packing is quite important especially in a case of international shipments in which consignment pass through various channels to reach the ultimate destination, so we put special concern regarding packaging. • We pack our goods in numerous ways based on the products. We pack our products in multiple ways, such as, o Shrink-wrapped o Carton boxes o Wooden pallets o Wooden boxes o Wooden crates
Yes! I am Interested

Hastelloy B3 Plate

Hastelloy B3 Plate
  • Hastelloy B3 Plate
  • Hastelloy B3 Plate
  • Hastelloy B3 Plate
  • Hastelloy B3 Plate
  • Hastelloy B3 Plate
  • Hastelloy B3 Plate
  • Hastelloy B3 Plate
  • Hastelloy B3 Plate
  • Hastelloy B3 Plate
  • Hastelloy B3 Plate
  • Hastelloy B3 Plate
  • Hastelloy B3 Plate
  • Hastelloy B3 Plate
Get Best Quote
Approx. Price: Rs 3,000 / KgGet Latest Price
Product Brochure

Product Details:

Minimum Order Quantity3000 Kg
GradeHastelloy B3 Plate
Usage/Application- Off-Shore Oil Drilling Companies - Power Generation - Petrochemicals - Gas Processing - Specialty
MaterialHastelloy B3 Plate
BrandHEUBACH
Density100 MM TO 2500 MM
ShapeROUND,SQUARE,RECTANGLE

HEUBACH INTERNATIONAL offers an extensive collection of Hastelloy Alloy B3 Sheets Plates Coils, which are made to excellence using soaring quality steel by our hard – working specialists who holds rich acquaintance in this area. These Hastelloy B3 Plates can function under extremely elevated temperatures, stern mechanical stress, and as well where soaring surface steadiness is essential. Hastelloy B3 Coils also endures formic, phosphoric acids, sulfuric, acetic, and other non – oxidizing media. These Hastelloy B3 Slatting Coils has been mainly used for their resistance to corrosion in non-oxidizing atmospheres such as HCl. Hastelloy B3 Perforated Coils (UNS N10675) is molybdenum – nickel alloy by means of outstanding resistance to pitting, stress – corrosion cracking plus, corrosion, thermal constancy higher to that of Hastelloy B-2. Meanwhile, these Alloy B3 Plates are also being offered in customized sizes and shapes to our customers. HEUBACH INTERNATIONAL is one of the pioneer supplier and dealer of these Alloy B3 Coils, which is very frequently used in heavy gauge welded components. A solution annealing of heat up to 1045 Degree C followed by quenching or rapid cooling will restore the original condition of Alloy B3 Slatting Coils, including removing alloy segregation and reestablishing ductility after cold working. While this temperature strength, level of these Alloy B3 Perforated Coils is almost double that of other alloys in the annealed condition, where many oil and gas applications require even greater strength.

Specifications

:

ASTM / ASME SB333

Size

:

1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm

Thickness

:

0.1mm to 12 mm Thk

Form

:

Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip, Flats, Blank (Circle), Ring (Flange)

Finish

:

Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)

Hardness

:

Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc.
EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Hastelloy B3 Plate, Sheet & Coil Chemical Composition

Grade

Ni

Mo

Cr

Fe

W

Mn

C

Al

Ti

Si

Hastelloy B3

65.0 min

28.5

1.5

1.5

3.0 max

3.0 max

0.01 max

0.50 max

0.2 max

10 max

 

Request
Callback


Additional Information:

  • Production Capacity: 80000
  • Delivery Time: 3 DAYS
  • Packaging Details: We focus on every procedure to assure quality, the package we usually take is pack Hastelloy B3 Plate with environmental poly bags, and then in free fumigation wooden cases or wooden plate. Also can accept customized package such as OEM by negotiation. We offers just about everything to meet your pack requirements. Lot of emphasis is placed on the packing and packaging. The Hastelloy B3 Plate are packed in wooden corrugated boxes foiled in plastic wraps and bubble wraps. HEUBACH INTERNATIONAL is focusing on to complete requirements and to deliver perfectly suitable solutions to our clients. We pack these product in suitable packing material to protect Bars form any damage in transport. By choosing the fastest way of shipping, we ensure the on-time delivery of orders. We are offering these Bars with convenient doorstep service, proper packing, fast shipping, and at reasonable rates. We are here to provide excellence in minimum time and standards. • Packing is quite important especially in a case of international shipments in which consignment pass through various channels to reach the ultimate destination, so we put special concern regarding packaging. • We pack our goods in numerous ways based on the products. We pack our products in multiple ways, such as, o Shrink-wrapped o Carton boxes o Wooden pallets o Wooden boxes o Wooden crates We focus on every procedure to assure quality, the package we usually take is pack Stainless Steel 304 Plate with environmental poly bags, and then in free fumigation wooden cases or wooden plate. Also can accept customized package such as OEM by negotiation. We offers just about everything to meet your pack requirements. Lot of emphasis is placed on the packing and packaging. The Stainless Steel 304 Plate are packed in wooden corrugated boxes foiled in plastic wraps and bubble wraps. HEUBACH INTERNATIONAL is focusing on to complete requirements and to deliver perfectly suitable solutions to our clients. We pack these p
Yes! I am Interested

Hastelloy B2 Plate

Hastelloy B2 Plate
  • Hastelloy B2 Plate
  • Hastelloy B2 Plate
  • Hastelloy B2 Plate
  • Hastelloy B2 Plate
  • Hastelloy B2 Plate
  • Hastelloy B2 Plate
  • Hastelloy B2 Plate
  • Hastelloy B2 Plate
  • Hastelloy B2 Plate
  • Hastelloy B2 Plate
  • Hastelloy B2 Plate
Get Best Quote
Approx. Price: Rs 2,000 / KgGet Latest Price
Product Brochure

Product Details:

Minimum Order Quantity2000 Kg
GradeHastelloy B2 Plate
Usage/Application- Off-Shore Oil Drilling Companies - Power Generation - Petrochemicals - Gas Processing - Specialty
MaterialHastelloy B2 Plate
BrandHEUBACH
Density100 MM TO 2500 MM
ShapeROUND,SQUARE,RECTANGLE

 

HEUBACH INTERNATIONAL offers Hastelloy Alloy B2 Sheets Plates Coils, which are made under the direction of our expert specialists who make sure to use improved techniques and newest tools in the manufacturing procedure. In addition, Hastelloy B2 Plates has excellent pitting resistance and SCC as well. Hastelloy B2 Coils controls other alloying rudiments such as chromium and iron solved other matters relating to fabricability. Molybdenum is the primary alloying component in Hastelloy B2 Slatting Coils which offers important corrosion resistance to reducing surroundings. Hastelloy B2 Perforated Coils is molybdenum – nickel alloy by means of substantial resistance to reducing atmospheres, such as sulfuric, hydrogen chloride gas, phosphoric and acetic acids. Meanwhile, these Alloy B2 Plates are as well being offered in customized sizes and shapes to our customers. HEUBACH INTERNATIONAL is one of the well – known supplier and dealer for Alloy B2 Coils, which is still providing excellent service. The largest fabrication of Alloy B2 Slatting Coils known to – date is shown here being thin sheet lined for exposure in a utility flue – gas desulfurization plant. Alloy B2 Perforated Coils was selected to replace a FRP fan because of its durability and corrosion resistance, where this fan will handle the incineration of radioactive and hazardous wastes. A practical concern related to susceptibility of Hastelloy UNS N10665 Sheets to inter – granular corrosion is the heat – affected zone of weldments.

 

Specifications

:

ASTM / ASME SB333

Size

:

1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm

Thickness

:

0.1mm to 12 mm Thk

Form

:

Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip, Flats, Blank (Circle), Ring (Flange)

Finish

:

Hot rolled plate (HR), Cold rolled sheet , 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)

Hardness

:

Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc.
EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

 

Hastelloy B2 Plate, Sheet & Coil Chemical Composition

 

Grade

C

Mn

Si

S

Co

Ni

Cr

Fe

Mo

P

B2

0.010 max

1.00 max

0.08 max

0.03 max

2.50 max

50.99 min*

14.50 – 16.50

4.00 – 7.00

15.00 – 17.00

0.04 max

 

Request
Callback


Additional Information:

  • Item Code: B2HASTELLOY
  • Production Capacity: 85000
  • Delivery Time: 2 DAYS
  • Packaging Details: We focus on every procedure to assure quality, the package we usually take is pack Hastelloy B2 Plate with environmental poly bags, and then in free fumigation wooden cases or wooden plate. Also can accept customized package such as OEM by negotiation. We offers just about everything to meet your pack requirements. Lot of emphasis is placed on the packing and packaging. The Hastelloy B2 Plate are packed in wooden corrugated boxes foiled in plastic wraps and bubble wraps. HEUBACH INTERNATIONAL is focusing on to complete requirements and to deliver perfectly suitable solutions to our clients. We pack these product in suitable packing material to protect Bars form any damage in transport. By choosing the fastest way of shipping, we ensure the on-time delivery of orders. We are offering these Bars with convenient doorstep service, proper packing, fast shipping, and at reasonable rates. We are here to provide excellence in minimum time and standards. • Packing is quite important especially in a case of international shipments in which consignment pass through various channels to reach the ultimate destination, so we put special concern regarding packaging. • We pack our goods in numerous ways based on the products. We pack our products in multiple ways, such as, o Shrink-wrapped o Carton boxes o Wooden pallets o Wooden boxes o Wooden crates
Yes! I am Interested

Hastelloy X Plate

Hastelloy X Plate
  • Hastelloy X Plate
  • Hastelloy X Plate
  • Hastelloy X Plate
  • Hastelloy X Plate
  • Hastelloy X Plate
  • Hastelloy X Plate
  • Hastelloy X Plate
  • Hastelloy X Plate
  • Hastelloy X Plate
  • Hastelloy X Plate
  • Hastelloy X Plate
  • Hastelloy X Plate
Get Best Quote
Approx. Price: Rs 3,300 / KgGet Latest Price
Product Brochure

Product Details:

Minimum Order Quantity3300 Kg
GradeHastelloy X Plate
Usage/Application- Off-Shore Oil Drilling Companies - Power Generation - Petrochemicals - Gas Processing - Specialty
MaterialHastelloy X Plate
BrandHEUBACH
Density100 MM TO 2500 MM
ShapeROUND,SQUARE,RECTANGLE

HEUBACH INTERNATIONAL offers Hastelloy Alloy X Sheets Plates and Coils in an extensive range, where our crew members make it a point to inspect these products on stern quality limits in order to be sure of their seamless toughness. However, procedures of Hastelloy X Plates are outstanding in terms of welding and forming. Hastelloy X Coils is an iron – molybdenum – nickel – chromium alloy that holds an excellent grouping of oxidation resistance, high temperature power and formability. Hastelloy X Slatting Coils offers robust potency features at high temperatures up to 2200 degree F. An iron – molybdenum – nickel – chromium alloy, Hastelloy X Perforated Coils offers excellent casting characteristics and excellent creep-and-stress rupture attributes. Meanwhile, these Alloy X Plates are also being offered in customized sizes and shapes to our customers. Alloy X Coils also resists sulfuric, phosphoric, formic, acetic acids and other non – oxidizing media. In addition to having exceptional corrosion resistance, Alloy X Slatting Coils can also be readily fabricated. Alloy X Perforated Coils exhibits superior welding conditions, providing excellent as – welded conditions for process applications in chemical – based industries such as food, beverage, personal care, and pharmaceutical. The high chromium content in Hastelloy UNS N06002 Sheets provides good resistance to oxidizing media while the molybdenum and tungsten content give good resistance to reducing media. Alloy N06002 Plates is an ideal material for using in the diverse chemical processes in the as – welded situation.

Specifications

:

ASTM / ASME SB435

Size

:

1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm

Thickness

:

0.1mm to 12 mm Thk

Form

:

Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip, Flats, Blank (Circle), Ring (Flange)

Finish

:

Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)

Hardness

:

Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc.

Hastelloy X Plate, Sheet & Coil Chemical Composition

Grade

Ni

Mo

Cr

Fe

Mn

C

Co

Si

P

S

Hastelloy X

Balance

8.00 – 10.00

20.50 – 23.00

17.00 – 20.00

1.00 max

0.05 – 0.15

0.50 – 2.50

1.00 max

0.04 max

0.03 max

Request
Callback


Additional Information:

  • Item Code: XHASTELLOY
  • Production Capacity: 85000
  • Delivery Time: 2 DAYS
  • Packaging Details: We focus on every procedure to assure quality, the package we usually take is pack Hastelloy X Plate with environmental poly bags, and then in free fumigation wooden cases or wooden plate. Also can accept customized package such as OEM by negotiation. We offers just about everything to meet your pack requirements. Lot of emphasis is placed on the packing and packaging. The Hastelloy X Plate are packed in wooden corrugated boxes foiled in plastic wraps and bubble wraps. HEUBACH INTERNATIONAL is focusing on to complete requirements and to deliver perfectly suitable solutions to our clients. We pack these product in suitable packing material to protect Bars form any damage in transport. By choosing the fastest way of shipping, we ensure the on-time delivery of orders. We are offering these Bars with convenient doorstep service, proper packing, fast shipping, and at reasonable rates. We are here to provide excellence in minimum time and standards. • Packing is quite important especially in a case of international shipments in which consignment pass through various channels to reach the ultimate destination, so we put special concern regarding packaging. • We pack our goods in numerous ways based on the products. We pack our products in multiple ways, such as, o Shrink-wrapped o Carton boxes o Wooden pallets o Wooden boxes o Wooden crates
Yes! I am Interested
X

Explore More Product



Reach Us
Mahendra Jain (CEO)
Heubach International
15, Keshav Bhavan, 1st Floor, 1st Parisiwada Lane, Near V. P. Road Police Station
Girgaon, Mumbai - 400004, Maharashtra, India


Call Us


Send E-mailSend SMS