Heubach International
Girgaon, Mumbai, Maharashtra
GST No. 27AEWPJ4118C1ZH
TrustSEAL Verified
Call 0804603816492% Response Rate
SEND EMAIL
Specifications ASTM B B725 as well as ASTM B167 cover nickel based alloys. The difference between both of them is that specification ASTM B B725 envelopesIncoloy Seamless Pipe,whereas ASTM B167 takes into accountInconel Seamless Pipe.
Nickel-Chromium-Iron Alloys Pipes, Nickel-Chromium-Cobalt-Molybdenum Alloy Seamless Pipe, Inconel Alloy Pipes Dealer in Mumbai, India.Prime quality Incoloy Seamless Pipe suppliers, Custom Inconel Pipe manufacturers, Check Inconel Bush Hex Pipe Price List, Inconel Hollow Pipe importer in India, Inconel Thick Wall Pipe and Thin Wall Pipe suppliers in MumbaiInconel Custom Pipesuperalloy is also known to have excellent mechanical properties, which is why, theInconel Bush Hex Pipeis frequently used in industries such as the chemical and aerospace.ASTM B167 Inconel Seamless Pipeenveloped by this specification can be manufactured and supplied in any one of the following conditions i.e. – cold worked annealed, hot worked annealed, or the seamlessInconel Alloy Pipecould be hot finished.
TheInconel Thick Wall Pipehas been intended for applications in general corrosion resistant and heat resistant applications. Theinconel pipe suppliers in uaeensure that the material conforms to the required chemical composition along with the required mechanical properties such as yield strength, tensile strength, elongation, non-destructive electric test, and rounding method. The following test methods shall be performed on the specified ASTM B167Inconel Thin Wall Pipe, such as chemical analysis, tension test, and hydrostatic or non-destructive electric test.
TheASME SB725 Inconel Alloy Welded Pipeis envisioned keeping in mind its use in general corrosive service and for mechanical applications. EachInconel Hexagonal Pipeneeds to either be welded and annealed condition or theIncoloy Welded Pipeneeds to be stress relieved and produced from the flat rolled alloys by performing an automatic welding process without the use of any filler metal additions. Theinconel pipe gradesneed to also be cold worked after performing the welding process. Welding done on aInconel Hollow Pipeensures that the alloy has developed
Product Details:
| Material Grade | Incoloy 330 Seamless Pipe |
| Material | Incoloy 330 Welded Pipe |
| Grade | Incoloy 330 Seamless Pipe Alloy 330 Seamless Pipe 330 Incoloy Seamless Pipe UNS N08330 Seamless Pipe |
| Usage/Application | Chemical Handling |
| Size/Diameter | 4 to 219mm W. T.: 0.5 to 20mm |
| Brand | HEUBACH |
| Standard | ASTM B 167 ASME SB 167 / ASTM B 725 ASME SB 725 |
| Single Piece Length | 3 meter, 6 meter |
| Product Type | Seamless / ERW/ EFW / Welded / Fabricated / CDW / DOM / CEW inconel |
| Density | All ASTM B167 inconel Pipes are marked as follows: Standard,Grade,OD,Thickness,Length,Heat No. |
330 Incoloy Alloy Pipes Chemical Composition
Grade | C | Mn | Si | P | S | Cr | Cu | N | |
330 | min. | – | – | 0.75 | – | – | 17.0 | – | 34.0 |
max. | 0.08 | 2.0 | 1.50 | 0.030 | – | 20.0 | – | 37.0 | |
Incoloy 330 Seamless / Welded Pipes Application Industries
330 Incoloy Pipes Test Certificates
We at HEUBACH INTERNATIONAL provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.
• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc
ASTM, ASME and API Incoloy 330 Pipe Value Added Services
Material Testing:
We at HEUBACH INTERNATIONAL ensure that all our materials go through strict quality tests before dispatching them to our clients.
• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and MacroTest
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test
Documentation
• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)
Nickel Alloy : ASTM / ASME SB 163 UNS 2200 ( NICKEL 200 )
ASTM / ASME SB 163 UNS 2201 (NICKEL 201 )
ASTM / ASME SB 163 / 165 UNS 4400 (MONEL 400 )
ASTM / ASME SB 464 UNS 8020 ( ALLOY 20 / 20 CB 3 )
ASTM / ASME SB 704/705 UNS 8825 INCONEL (825)
Additional Information:
Product Details:
| Minimum Order Quantity | 100 Kg |
| Material Grade | Inconel 600 Pipe |
| Material | Inconel 600 Pipe |
| Grade | Inconel 600 Pipe |
| Size/Diameter | 4 to 219mm W. T.: 0.5 to 20mm |
| Usage/Application | Chemical Handling |
| Brand | inconel Pipe make Tubacex Tubos Inoxidables S.A., Spain inconel Pipe make Nippon Steel Corporation |
| Standard | ASTM B 167 ASME SB 167 / ASTM B 725 ASME SB 725 |
| Single Piece Length | 3 meter, 6 meter |
| Product Type | Seamless / ERW/ EFW / Welded / Fabricated / CDW / DOM / CEW inconel |
| Density | All ASTM B167 inconel Pipes are marked as follows: Standard,Grade,OD,Thickness,Length,Heat No. |
HEUBACH INTERNATIONAL offers a wide range of Alloy 600 Pipes, where it is extensively demanded amongst the customers due to its various uses. These Inconel 600 Seamless Pipes (UNS N06600) was designed for service temperatures from cryogenic to elevated temperatures in the range of 2000 Degree F. Inconel 600 Welded Pipes is nonmagnetic and possess an excellent combination of high strength. These Inconel 600 EFW Pipes are readily weldable and are used in a variety of corrosion resisting applications. Inconel 600 ERW Pipes is a nickel – base alloy with excellent carburization. Inconel 600 Round Pipes as well has excellent hot and cold workability. Meanwhile, these Inconel 600 Pipes are also being offered in different sizes and shapes to our customers. Inconel 600 Pipes is a nickel – chromium alloy used for applications that require corrosion and high temperature resistance. These Inconel 600 Hexagonal Pipes is a non – magnetic, nickel – based high temperature alloy possessing an excellent combination of high strength, hot and cold workability, and resistance to ordinary form of corrosion. Inconel 600 Hallow Pipes is a nickel – chromium alloy with good oxidation resistance at higher temperatures, with good resistance in carburizing and chloride containing environments. These Inconel 600 Bush Hex Pipes is a standard engineering material for applications which require resistance to corrosion and heat.
Nickel Alloy : ASTM / ASME SB 163 UNS 2200 ( NICKEL 200 )
ASTM / ASME SB 163 UNS 2201 (NICKEL 201 )
ASTM / ASME SB 163 / 165 UNS 4400 (MONEL 400 )
ASTM / ASME SB 464 UNS 8020 ( ALLOY 20 / 20 CB 3 )
ASTM / ASME SB 704/705 UNS 8825 INCONEL (825)
ASTM / ASME SB 167 / 517 UNS 6600 (INCONEL 600 )
ASTM / ASME SB 167 UNS 6601 ( INCONEL 601 )
Inconel Alloy Pipe Specification
| ASTM Specification | ASTM B 167 ASME SB 167 / ASTM B 725 ASME SB 725 |
|---|---|
| Standard | ASTM, ASME, JIS, AISI, AMS, EN, SAE, DIN, NF, TOCT, DS, DTD, GB |
| ASTM B167 inconel Seamless Pipe Size | 4 to 219mm W. T.: 0.5 to 20mm |
| Incoloy Welded Pipe Size | 5.0 - 1219.2 mm |
| Inconel ASME SB725 Inconel Alloy EFW Pipe size | 5.0 - 1219.2 mm |
| Swg & Bwg | 12 Swg., 10 Swg., 16 Swg., 14 Swg., 20 Swg., 18 Swg., |
| inconel Pipe Schedule | XS, SCH30, SCH40, XXS, SCH80, SCH120, SCH60, SCH140, STD, SCH10, SCH10S, SCH40S, SCH80, SCH20, SCH5, SCH160 |
| inconel pipe Length | Double Random, Single Random, Standard & Cut length Pipe |
| Finish | Polished, AP (Annealed & Pickled), BA (Bright & Annealed), MF, NO.1, NO.4, 2B, BA, HL, 8K, Mirror finish, etc |
| Form | inconel are available in form of Round, Square, Hollow, Rectangular, Hydraulic, Coiled, Straight Pipes, “U” Shape, Pan Cake Coils etc. |
Additional Information:
Product Details:
| Minimum Order Quantity | 200 Kg |
| Material Grade | Inconel 625 Welded Pipe |
| Material | Inconel Alloy 625 Round Pipe |
| Grade | Inconel 600 Pipe |
| Usage/Application | Utilities Water |
| Size/Diameter | 4 to 219mm W. T.: 0.5 to 20mm |
| Brand | inconel Pipe make Tubacex Tubos Inoxidables S.A., Spain inconel Pipe make Nippon Steel Corporation |
| Standard | ASTM B 167 ASME SB 167 / ASTM B 725 ASME SB 725 |
| Single Piece Length | 3 meter, 6 meter |
| Product Type | Seamless / ERW/ EFW / Welded / Fabricated / CDW / DOM / CEW inconel |
| Density | All ASTM B167 inconel Pipes are marked as follows: Standard,Grade,OD,Thickness,Length,Heat No. |
Our Alloy 600 tube products can be offered in seamless, welded or welded and cold drawn form, depending on the alloy you require. Our Alloy 600/625 seamless and welded tubes size range starts at 1/2” NB or OD size and goes up to 6″ NB and OD. We can offer Nickel Alloy 600 Tubing in random lengths of up to 6meters long or cut to a specific length as ordered. Inconel pipes and tubes are largely used for piping in Chemical Industry, Pulp, & Paper Manufacturing, Heat Exchangers, Process Piping.
Alloy 600 or Inconel 600, is one of the most popular high temperature alloy and is commonly identified as UNS N06600. Inconel 600 is a non-magnetic nickel-chromium alloy, with features of excellent corrosion resistance and mechanical properties, in addition to good weldability under a wide range of temperatures. Inconel 600 is a nickel-chromium alloy, with an addition of aluminum, which exhibits excellent resistance to high temperature oxidation. The addition of aluminium allows it to demonstrate high mechanical properties even in extremely hot environments.
Alloy 600 seamless pipes and tubing’s are available in both OD and NB sizes. In addition to standard sizes, which are available in stock, our specialty is to manufacture and supply custom size Alloy 600 cold drawn seamless tubing’s from our factory. INCONEL alloy 600 is a nickel-chromium alloy with good oxidation resistance at high temperatures and resistance to chloride-ion stress-corrosion cracking, corrosion by high-purity water, and caustic corrosion. INCONEL alloy 600 is used for furnace components, in chemical and food processing, in nuclear engineering, and for sparking electrodes.
SpecificationProducts | OD | WT | Length | |||
Inch | MM | Inch | MM | Ft max. | Mt max. | |
Alloy 600/625 Tube | 1/2’’-3’’ | 12.0-76.2 | 0.02’’-0.5’’ | 0.5-12.0 | 105’ | 32.00 |
Alloy 600/625 Pipe | NPS1/2’’-6’’ | 21.34-168.3 | Sch10-Sch80 | 2.11-12.7 | 98’ | 30.00 |
Additional Information:
Product Details:
| Minimum Order Quantity | 150 Kg |
| Material Grade | UNS N07718 Welded Pipe Exporter,Inconel WERKSTOFF NR. 2.4668 Pipe,Inconel 718 Hollow Pipe,Supplie |
| Material | 718 Inconel Seamless Pipes |
| Grade | Inconel 718 Pipes |
| Size/Diameter | 4 to 219mm W. T.: 0.5 to 20mm |
| Usage/Application | Chemical Handling |
| Brand | inconel Pipe make Tubacex Tubos Inoxidables S.A., Spain inconel Pipe make Nippon Steel Corporation |
| Standard | ASTM B 167 ASME SB 167 / ASTM B 725 ASME SB 725 |
| Single Piece Length | 3 meter, 6 meter |
| Product Type | Seamless / ERW/ EFW / Welded / Fabricated / CDW / DOM / CEW inconel |
| Density | All ASTM B167 inconel Pipes are marked as follows: Standard,Grade,OD,Thickness,Length,Heat No. |
Inconel Alloy 718 (UNS N07718.W.Nr. 2.4668), is a precipitation-hardenable nickel-chromium alloy, useful for its exceptionally high yield, tensile and creep-rupture properties. Alloy Metals and Tubes, International is a distributor of Inconel Alloy 718 tubing, it is one of our most popular alloys. While we specialize in large OD custom tubes with heavy walls for use in the oil and gas industry; we inventory a range of sizes, from as small as .040″ OD to as large as 6.0″ OD. We manage manufacturing, heat treating to the specifications, machining and inventorying.
Inconel Alloy 718 tubing, because of its composition, has excellent corrosion resistance. Nickel is a factor in its corrosion resistance in presence of acidity and alkalinity; and contributes to combating chloride-ion stress corrosion cracking. Inconel Alloy 718 tubing is able to withstand attack by oxidizing media and sulfur compounds due to the Chromium content. Molybdenum allows the alloy to resist pitting. Inconel Alloy 718 tubing can be easily fabricated and its weldability makes it an attractive choice in a variety of applications, mainly in aerospace and oil and gas industries.
If Inconel Alloy 718 tubing is going to be machined, formed, or welded, it is purchased in the annealed or stress relieved condition. Once fabricated, it can be heat treated as required by the applicable specification. To produce optimum properties and take advantage of its precipitation-hardening character, several heat treatment procedures have been developed. Literature detailing the different phases developed during heat treating should be studied and compared to the properties desired before any actual heat treating takes place.
High-performance nickel alloys for sour oil and gas fields. Inconel 718 Pipe hardened nickel-based alloys and cold-worked solid nickel-based alloys offer many advantages such as high strength, toughness, low magnetic permeability and excellent corrosion resistance. Inconel 718 Pipe has proven to be a valuable and versatile material that is able to solve a wide variety of design and application problems. Inconel 718 Pipe has the ability to resist low temperature aggressive corrosion environments, as well as hostile high temperature environments. The excellent weldability of the alloy, and its ability to be joined very successfully to other alloys with different compositions.
Chemial Composition| Inconel 718 | Min | Mix |
| Ni | 50 | 55 |
| C | - | 0.08 |
| Mn | - | 0.35 |
| Co | - | 1 |
| Si | - | 0.35 |
| Cr | 17 | 21 |
| Fe | balance | balance |
| Al | 0.2 | 0.8 |
| Ti | 0.7 | 1.15 |
| cu | - | 0.3 |
| Mo | 2.8 | 3.3 |
| Nb | 4.75 | 5.5 |
| S | - | 0.01 |
Additional Information:
Product Details:
| Minimum Order Quantity | 100 Kg |
| Material Grade | Incoloy 800/ 800H/ 800HT Welded Pipe |
| Material | 800/ 800H/ 800HT Alloy Round Pipe |
| Grade | UNS N08800 / N08810 / N08811 Seamless Pipe |
| Usage/Application | Chemical Handling |
| Size/Diameter | 4 to 219mm W. T.: 0.5 to 20mm |
| Brand | inconel Pipe make Tubacex Tubos Inoxidables S.A., Spain inconel Pipe make Nippon Steel Corporation |
| Standard | ASTM B 167 ASME SB 167 / ASTM B 725 ASME SB 725 |
| Single Piece Length | 6 meter, 3 meter |
| Product Type | Seamless / ERW/ EFW / Welded / Fabricated / CDW / DOM / CEW inconel |
| Density | All ASTM B167 inconel Pipes are marked as follows: Standard,Grade,OD,Thickness,Length,Heat No. |
Specifications | : | ASTM B407 ASME SB407 / ASTM B514 ASME SB514 |
Dimensions | : | ASTM, ASME and API |
Size | : | 15″NB TO 150″NB IN |
Specialized in | : | Large Diameter Size |
Schedule | : | SCH5, SCH10, SCH40, STD, SCH80, SCH160 |
Type | : | Seamless / ERW / Welded / Fabricated / LSAW Pipes |
Form | : | Round, Hydraulic Etc |
Length | : | Single Random, Double Random & Cut Length. |
|
| |
Grade | C | Mn | Si | Fe | S | Cr | Al-Ti | Ni | |
800 | min. | – | – | – | 39.5 | – | 19.0 | 0.15 | 30.0 |
max. | 0.1 | 1.5 | 1.0 | – | 0.015 | 23.0 | 0.60 | 35.0 | |
800H | min. | 0.05 | – | – | 39.5 | – | 19.0 | 0.15 | 30.0 |
max. | 0.1 | 1.5 | 1.0 | – | 0.015 | 23.0 | 0.60 | 35.0 | |
800HT | min. | 0.06 | – | – | 39.5 | – | 19.0 | 0.85/0.25 | 30.0 |
max. | 0.1 | 1.5 | 1.0 | – | 0.015 | 23.0 | 1.20/0.60 | 35.0 | |
Additional Information:
Product Details:
| Minimum Order Quantity | 150 Kg |
| Material Grade | Inconel welded pipe |
| Grade | Incoloy 800 Pipe |
| Material | Inconel Alloy Round Pipe |
| Usage/Application | Chemical Handling |
| Size/Diameter | 4 to 219mm W. T.: 0.5 to 20mm |
| Brand | inconel Pipe make Tubacex Tubos Inoxidables S.A., Spain inconel Pipe make Nippon Steel Corporation |
| Standard | ASTM B 167 ASME SB 167 / ASTM B 725 ASME SB 725 |
| Single Piece Length | 3 meter, 6 meter |
| Product Type | Seamless / ERW/ EFW / Welded / Fabricated / CDW / DOM / CEW inconel |
| Density | All ASTM B167 inconel Pipes are marked as follows: Standard,Grade,OD,Thickness,Length,Heat No. |
Inconel Custom Pipe superalloy is also known to have excellent mechanical properties, which is why, the Inconel Bush Hex Pipe is frequently used in industries such as the chemical and aerospace.ASTM B167 Inconel Seamless Pipe enveloped by this specification can be manufactured and supplied in any one of the following conditions i.e. – cold worked annealed, hot worked annealed, or the seamless Inconel Alloy Pipe could be hot finished.
The Inconel Thick Wall Pipe has been intended for applications in general corrosion resistant and heat resistant applications. The inconel pipe suppliers in uae ensure that the material conforms to the required chemical composition along with the required mechanical properties such as yield strength, tensile strength, elongation, non-destructive electric test, and rounding method. The following test methods shall be performed on the specified ASTM B167 Inconel Thin Wall Pipe, such as chemical analysis, tension test, and hydrostatic or non-destructive electric test.
The ASME SB725 Inconel Alloy Welded Pipe is envisioned keeping in mind its use in general corrosive service and for mechanical applications. Each Inconel Hexagonal Pipe needs to either be welded and annealed condition or the Incoloy Welded Pipe needs to be stress relieved and produced from the flat rolled alloys by performing an automatic welding process without the use of any filler metal additions. The inconel pipe grades need to also be cold worked after performing the welding process. Welding done on a Inconel Hollow Pipe ensures that the alloy has developed optimum resistance to corrosion in the weld area as well as base metal during the final heat treatment.
Inconel Composition
| Inconel | Element (% By Mass) | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Ni | Cr | Fe | Mo | Nb | Co | Mn | Cu | Al | Ti | Si | C | S | P | B | |
| 600 | 72.0 | 14.0–17.0 | 6.0–10.0 | 1.0 | 0.5 | 0.5 | 0.15 | 0.015 | |||||||
| 617 | 44.2–56.0 | 20.0–24.0 | 3.0 | 8.0–10.0 | 10.0–15.0 | 0.5 | 0.5 | 0.8–1.5 | 0.6 | 0.5 | 0.15 | 0.015 | 0.015 | 0.006 | |
| 625 | 58.0 | 20.0–23.0 | 5.0 | 8.0–10.0 | 3.15–4.15 | 1.0 | 0.5 | 0.4 | 0.4 | 0.5 | 0.1 | 0.015 | 0.015 | ||
| 690 | 59.5 | 30 | 9.2 | 0.35 | 0.01 | 0.02 | 0.35 | 0.019 | 0.003 | ||||||
| 718 | 50.0–55.0 | 17.0–21.0 | Balance | 2.8–3.3 | 4.75–5.5 | 1.0 | 0.35 | 0.2–0.8 | 0.65–1.15 | 0.3 | 0.35 | 0.08 | 0.015 | 0.015 | 0.006 |
| X-750 | 70.0 | 14.0–17.0 | 5.0–9.0 | 0.7–1.2 | 1.0 | 1.0 | 0.5 | 0.4–1.0 | 2.25–2.75 | 0.5 | 0.08 | 0.01 |
Additional Information:
Product Details:
| Minimum Order Quantity | 100 Kg |
| Material Grade | 925 Incoloy Seamless Pipe |
| Material | Incoloy 925 Welded Pipe |
| Usage/Application | Chemical Handling |
| Brand | HEUBACH |
| Standard | ASTM B 167 ASME SB 167 / ASTM B 725 ASME SB 725 |
| Single Piece Length | 6 meter, 3 meter |
| Product Type | Seamless / ERW/ EFW / Welded / Fabricated / CDW / DOM / CEW inconel |
| Density | All ASTM B167 inconel Pipes are marked as follows: Standard,Grade,OD,Thickness,Length,Heat No. |
| Elongation | Incoloy 925 Seamless Pipe,Incoloy 925 Welded Pipes,925 Incoloy Hollow Pipe,ASME SB725 Seamless In |
| ASTM B163 Inconel Alloy Tubing Standards | ASTM B163 / ASME SB163, ASTM B516/ ASME SB516 |
|---|---|
| ASTM B163 Inconel Alloy Seamless Tube Size | 3.35 mm OD To 101.6 mm OD |
| ASTM B163 Inconel Alloy Welded Tube Size | 6.35 mm OD To 152 mm OD |
| ASTM B163 Inconel Tubing Swg & Bwg | 10 Swg., 12 Swg., 14 Swg., 16 Swg., 18 Swg., 20 Swg. |
| Inconel Tube wall thickness | 0.020" –0.220", (special wall thicknesses available) |
| Incoloy Tubing Length | Single Random, Double Random, Standard & Cut length Tube |
| Inconel Tubing Finish | Polished, AP (Annealed & Pickled), BA (Bright & Annealed), MF |
| Form | ‘U’ bent, Hollow, Hydraulic, LSAW, Boiler, Straight Tube, Tube Coil, Round, Rectangular, Square Etc |
| Types of Inconel Alloy Tubing | Seamless, ERW, EFW, Welded, Fabricated Tube / Tubing |
| Inconel Alloy Tube End | Plain End, Beveled End, Treaded Tube |
| Marking | All ASTM B163 Inconel Tubing are marked as follows: Standard, Grade, OD, Thickness, Length, Heat No. (Or according to the customer’s request.) |
| Application & uses of Inconel Tube | Oil Tube, Gas Tube, Fluid Tube, Boiler Tube, Heat exchanger Tube, |
| Value Added Service | Draw & Expansion as per required Size & Length, Polish (Electro & Commercial) Annealed & Pickled Bending, Machining Etc. |
| Specialize in | ASTM B163 Inconel Capillary Tube & Other Odd Size inconel Heat Exchanger & Condenser Tube |
| Test Certificate | Manufacturer Test Certificate Laboratory Test Certificate from Govt. Approved Lab. Under Third Party Inspection |
| Manufacturers of Inconel Tube |
|
Additional Information:
Product Details:
| Minimum Order Quantity | 100 Kg |
| Material Grade | Inconel 601 Pipe |
| Material | Inconel 601 Seamless Pipe |
| Grade | Inconel 601 ERW Pipe |
| Size/Diameter | 4 to 219mm W. T.: 0.5 to 20mm |
| Usage/Application | Chemical Handling |
| Brand | inconel Pipe make Tubacex Tubos Inoxidables S.A., Spain inconel Pipe make Nippon Steel Corporation |
| Standard | ASTM B 167 ASME SB 167 / ASTM B 725 ASME SB 725 |
| Single Piece Length | 6 meter, 3 meter |
| Product Type | Seamless / ERW/ EFW / Welded / Fabricated / CDW / DOM / CEW inconel |
| Density | All ASTM B167 inconel Pipes are marked as follows: Standard,Grade,OD,Thickness,Length,Heat No. |
| ASTM Specification | ASTM B 167 ASME SB 167 / ASTM B 829 ASME SB 829 / ASTM B 517 ASME SB 517 |
|---|---|
| Standard | ASTM, ASME, JIS, AISI, AMS, EN, SAE, DIN, NF, TOCT, DS, DTD, GB |
| ASTM B167 inconel 601 Seamless Pipe Size | 4 to 219mm W. T.: 0.5 to 20mm |
| UNS N06601 Welded Pipe Size | 5.0 - 1219.2 mm |
| Inconel WERKSTOFF NR. 2.4851 EFW Pipe size | 5.0 - 1219.2 mm |
| Swg & Bwg | 12 Swg., 10 Swg., 16 Swg., 14 Swg., 20 Swg., 18 Swg., |
| 601 Inconel Pipe Schedule | XS, SCH30, SCH40, XXS, SCH80, SCH120, SCH60, SCH140, STD, SCH10, SCH10S, SCH40S, SCH80, SCH20, SCH5, SCH160 |
| inconel 601 pipe Length | Double Random, Single Random, Standard & Cut length Pipe |
| Finish | Polished, AP (Annealed & Pickled), BA (Bright & Annealed), MF, NO.1, NO.4, 2B, BA, HL, 8K, Mirror finish, etc |
| Form | inconel 601 are available in form of Round, Square, Hollow, Rectangular, Hydraulic, Coiled, Straight Pipes, “U” Shape, Pan Cake Coils etc. |
| Type of 601 Alloy Pipe | Seamless / ERW/ EFW / Welded / Fabricated / CDW / DOM / CEW inconel 601 |
| inconel 601 pipe End | Plain End, Beveled End, Treaded Pipe, Screwed ends |
| Marking on Alloy 601 Pipe | All ASTM B167 inconel 601 Pipes are marked as follows: Standard, Grade, OD, Thickness, Length, Heat No. (Or according to the customer’s request.) |
Additional Information: