Product Details:
Minimum Order Quantity | 20 Piece |
Material | Stainless Steel |
Brand | HEUBACH |
Size | 3/6" to 2" |
Grade | 200/201 |
Country of Origin | Made in India |
Density | 8.9 g/cm3 |
Melting Point | 1446 DegreeC (2635 DegreeF) |
HEUBACH INTERNATIONAL is one of the prominent whole seller and supplier of quality Nickel 200/201 Bolt/Nut, which is the higher carbon (0.04 – 0.10) version of the alloy. These Nickel 200 Hex Head Bolts has slightly improved corrosion resistance over stainless steel in strongly oxidizing environments. Nickel 200 Hex Head Nuts is also advantageous for high temperature service because of its good mechanical properties. These Nickel 200 Square Bolts offers higher creep and stress rupture properties than Alloy 304 and, particularly might also be considered for exposures where sensitization and inter – granular corrosion are concerns. Nickel 200/201 Square Nuts is a columbium (niobium) / tantalum stabilized austenitic chromium-nickel stainless steel which was developed to provide an 18 – 8 type alloy with improved inter – granular-corrosion resistance. These Nickel 200/201 Eye Bolts has a slightly improved corrosion resistance over other alloys of stainless steel in strongly oxidizing environments as a result of the addition of columbium (niobium) and tantalum. Nickel 200/201 Eye Nuts was developed for enhanced creep resistance and for higher strength at temperatures above 1000 Degree F (537 Degree C). In most instances, the carbon content of these Nickel 200 T-Bolts enables dual certification. Nickel 200 T-Nuts does not perform well in chloride solutions.
Alloy 200/201 Bolt/Nut Specifications
Specifications |
: |
ASTM B 160 ASME SB 160 |
Standard |
: |
DIN, ASTM, BS and all International Standards |
Length |
: |
3 mm to 200 mm |
Size |
: |
M3 – M56 | 3/6″ to 2″ | Custom Sizes |
Type |
: |
Hex Head Bolts, Square Bolts, U bolts, Eye bolts, T bolt, Hex Bolt, Lag Bolts, Counter sunk Bolts, Hex Head nuts, Square nuts, Lock nuts, Eye nuts, wing nuts, T nuts, Panel Nuts, Coupling Nuts, Dome nuts, Acorn Nuts. |
200 Nickel Alloy Bolt/Nut Test Certificates
We at HEUBACH INTERNATIONAL provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1.
• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc
Additional Information:
Product Details:
Size | 1/2 inch o 50 inch |
Material | Incoloy 800 / 800H / 800HT Threaded Forged Fittings |
Usage/Application | - Off-Shore Oil Drilling Companies - Power Generation - Petrochemicals - Gas Processing - Specialty |
Surface Finish | Incoloy 800 / 800H / 800HT Threaded Forged Fittings |
Brand | Incoloy 800 / 800H / 800HT Threaded Forged Fittings |
Connection Type | Incoloy 800 / 800H / 800HT Threaded Forged Fittings |
HEUBACH INTERNATIONAL offers a wide quality range of Incoloy 800 / 800H / 800HT Forged Threaded Fittings, where our products are used for fitting purpose in number of applications. Incoloy 800 Forged Threaded Elbow (UNS N08800) is extremely resistant to corrosion, even in acidic environment. Incoloy 800H Forged Threaded Tee (UNS N08810) is excellent resistance to oxidation, sulfidation, and carburization. Heat treatment retorts, muffles jigs and fixtures have also used these Incoloy 800HT Forged Threaded Cross (UNS N08811) to a great effect. Our Alloy 800 Forged Threaded Fittings are resistant to embrittlement from precipitation of sigma phase and chloride stress – corrosion cracking due to the nickel content. The higher strength in this Alloy 800H Forged Threaded Coupling results from close control of carbon, aluminum and titanium contents in conjunction by means of a high temp anneal.
Chemical Composition of Incoloy 800/800H/800HT/825 Forged Fittings
Grade | C | Mn | Si | S | Cu | Fe | Ni | Cr | Al | Ti |
800 | 0.10 max | 1.50 max | 1.00 max | 0.015 max | 0.75 max | 39.50 min | 30.00 – 35.00 | 19.00 – 23.00 | 0.15 – 0.60 | 0.15 – 0.60 |
800H | 0.05 – 0.10 | 1.50 max | 1.00 max | 0.015 max | 0.75 max | 39.50 min | 30.00 – 35.00 | 19.00 – 23.00 | 0.15 – 0.60 | 0.15 – 0.60 |
800HT | 0.06 – 0.10 | 1.50 max | 1.00 max | 0.015 max | 0.75 max | 39.50 min | 30.00 – 35.00 | 19.00 – 23.00 | 0.15 – 0.60 | 0.15 – 0.60 |
Alloy 825 | 0.05 max | 1.0 max | 0.5 max | 0.03 max | 1.5 – 3.0 | 22.0 min | 38.0 – 46.0 | 19.5 – 23.5 | 0.2max | 0.6 – 1.2 |
Mechanical Properties Of Incoloy 800/800H Forged Fittings
Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
Alloy 800 / 800H / 800HT | 7.94 g/cm3 | 1385 °C | Psi – 75,000 , MPa – 520 | Psi – 30,000 , MPa – 205 | 30 % |
Alloy 825 | 8.14 g/cm3 | 1400 °C | Psi – 80,000 , MPa – 550 | Psi – 32,000 , MPa – 220 | 30 % |
4.0/5
Rated by 27 Users