Heubach International
Heubach International
Girgaon, Mumbai, Maharashtra
GST No. 27AEWPJ4118C1ZH
TrustSEAL Verified
Call 08048549403 91% Response Rate
SEND EMAIL

PIPE FITTINGS

Titanium Butt weld Pipe Fittings, Titanium Forged Fittings, Alloy Butt weld Fittings, Titanium Alloy Grade 2 Forged Socket weld Fittings, Titanium Alloy Gr.2 Pipe Fittings Suppliers, ASTM B381 Ti Alloy Grade.2 High Pressure Forged Fittings Manufactures, Titanium Gr2 ASME SB363 Seamless Pipe Fittings Stockist in Mumbai India.

ASME B16.11 Titanium Gr.2 Forged Elbow, ASTM B363 Titanium Grade 2 Buttweld Reducer, Titanium Alloy in Grade.2 Fittings, Titanium Alloy Gr2 Threaded Fittings Suppliers, ASME SB381 Titanium Gr.2 Forged Tee, ANSI B16.9 Gr.2 Ti Alloy Stub End Exporters.


Stainless Steel Butt weld Pipe Fittings, SS Forged Fittings, SS Butt weld Fittings, SS 304 Forged Socket weld Fittings, SS WP304L Pipe Fittings Suppliers, ASTM A182 SS 304L High Pressure Forged Fittings Manufactures, Stainless Steel WP304H ASME SA403 Seamless Pipe Fittings Stockist, SS 304 Threaded Fittings Suppliers in Mumbai India.

ASME B16.11 Stainless Steel 304 Forged Elbow, ASTM A403 WP304L Buttweld Reducer, Stainless Steel in Grades 304 / 304L / 304H / Fittings, ASME SA182 SS 304H Forged Tee, ANSI B16.9 Stainless Steel WP304 Stub End Exporters.

HEUBACH INTERNATIONAL is a known manufacturer and exporter ofINCONEL 600 FITTINGS,which is non-magnetic and is resistant to a wide range of corrosive materials. ForInconel 600 Butt Weld Pipe Fittings,slight changes in the relative amounts of sulfur and elements that tend to tie up sulfur cause large differences in ductility.Inconel 600 Butt Weld Fittingsis a nonmagnetic, corrosion and oxidation resistant, nickel-base alloy, which can operate from cryogenic temperatures to 700 Degree F (370 Degree C).INCONEL 600 PIPE FITTINGShas excellent corrosion resistance to both organic and inorganic compounds.INCONEL 600 FORGED FITTINGSis not suggested for use at red heat when sulfur is present due to elevated nickel quantities. The high nickel content ofInconel 600 Forged Threaded Fittingsprovides exceptional resistance to chloride-ion stress-corrosion cracking. Application of Inconel 600 Forged Socket Weld Fittings is useful in the chemical, aerospace, heat treating, pulp and paper industries to name a few. Inconel 600 Elbow Pipe Fittings is a nickel-chromium alloy with good oxidation resistance at high temperatures and resistance to chloride-ion stress-corrosion cracking, corrosion by high-purity water, and caustic corrosion.

Incoloy 925 Threaded Forged Fittings

Incoloy 925 Threaded Forged Fittings
  • Incoloy 925 Threaded Forged Fittings
  • Incoloy 925 Threaded Forged Fittings
  • Incoloy 925 Threaded Forged Fittings
  • Incoloy 925 Threaded Forged Fittings
  • Incoloy 925 Threaded Forged Fittings
  • Incoloy 925 Threaded Forged Fittings
  • Incoloy 925 Threaded Forged Fittings
  • Incoloy 925 Threaded Forged Fittings
  • Incoloy 925 Threaded Forged Fittings
Get Best Quote
Approx. Price: Rs 6,500 / NumberGet Latest Price
Product Brochure

Product Details:

Minimum Order Quantity6500 Number
Size1/2 inch o 50 inch
MaterialIncoloy 925 Threaded Forged Fittings
Usage/Application- Off-Shore Oil Drilling Companies - Power Generation - Petrochemicals - Gas Processing - Specialty
Surface FinishIncoloy 925 Threaded Forged Fittings
BrandIncoloy 925 Threaded Forged Fittings
Connection TypeIncoloy 925 Threaded Forged Fittings
Country of OriginMade in India

HEUBACH INTERNATIONAL offers a wide range of Incoloy 925 Forged Threaded Fittings, which is recommended amongst the clients for their availability in various sizes and specifications. Incoloy 925 Forged Threaded Elbow (UNS N09925) is used for surface and down – hole hardware in sour gas wells and for oil – production equipment. Incoloy 925 Forged Threaded Tee is also used in Fasteners, Pump and marine shafting, Strong, seamless piping and tubing, etc. Incoloy 925 Forged Threaded Cross can be machined using conventional machining methods which are used for iron based alloys. A combination of high strength and corrosion resistance in Incoloy 925 Forged Threaded Cap make it suitable in applications such as valves, hangers, packers, and tubulars, in sour gas environments. Meanwhile, these Incoloy 925 Forged Threaded Fittings are also being offered in different sizes and shapes to our customers. Application requiring a combination of high strength and corrosion resistance may consider Incoloy 925 Forged Threaded Coupling. Sufficient nickel content in Incoloy 925 Forged Threaded Union provides protection against chloride – ion stress – corrosion cracking whilst in conjunction with the added copper and molybdenum resistance to reducing chemicals is enjoyed. Many different industries rely on Incoloy 925 Forged Threaded Bushing for a number of uses including: pump shafts and marine fasteners. On the other hand, molybdenum and copper Incoloy 925 Forged Threaded Plug are added to increase its resistance to corrosive media..

Incoloy 925 Forged Threaded Fittings Chemical Composition

Grade

Ni

Cr

Fe

Si

Mo

Cu

Mn

C

S

Al

Incoloy 925

42 – 46

19.55 – 22.5

22 min

0.5 max

2.5 – 3.5

1.5 – 3.0

1.0 max

0.03 max

0.03 max

0.1 – 0.5

Incoloy 925 Threaded Fitting Mechanical Properties

Density

Melting Point

Tensile Strength

Yield Strength (0.2%Offset)

Elongation

8.14 g/cm3

1343°C

650

300

30 %

Equivalent Grades for 925 Incoloy Forged Threaded Fittings

STANDARD

WERKSTOFF NR.

UNS

Incoloy 925

N09925



Incoloy 925 Forged Threaded Fittings Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry 
      EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc
Request
Callback


Additional Information:

  • Item Code: INCOLOY925
  • Production Capacity: 90000
  • Delivery Time: 2 DAYS
  • Packaging Details: We focus on every procedure to assure quality, the package we usually take is pack Incoloy 925 Threaded Forged Fittings with environmental poly bags, and then in free fumigation wooden cases or wooden palte. Also can accept customized package such as OEM by negotiation. We offers just about everything to meet your Incoloy 925 Threaded Forged Fittings pack requirements. Lot of emphasis is placed on the packing and packaging. The product are packed in wooden corrugated boxes foiled in plastic wraps and bubble wraps. HEUBACH INTERNATIONAL is focusing on to complete requirements and to deliver perfectly suitable solutions to our clients. We pack these product in suitable packing material to protect Bars form any damage in transport. By choosing the fastest way of shipping, we ensure the on-time delivery of orders. We are offering these Bars with convenient doorstep service, proper packing, fast shipping, and at reasonable rates. We are here to provide excellence in minimum time and standards. While packaging we attach some documents and reports along with supply made products that show the quality of our offered range of products. The packaging of this product is done by big bundles with the individual wrapping of plastic film which protects from contaminations.
Yes! I am Interested

Stainless Steel 316/316L/316Ti Buttweld Fittings

Stainless Steel 316/316L/316Ti Buttweld Fittings
  • Stainless Steel 316/316L/316Ti Buttweld Fittings
  • Stainless Steel 316/316L/316Ti Buttweld Fittings
  • Stainless Steel 316/316L/316Ti Buttweld Fittings
  • Stainless Steel 316/316L/316Ti Buttweld Fittings
  • Stainless Steel 316/316L/316Ti Buttweld Fittings
  • Stainless Steel 316/316L/316Ti Buttweld Fittings
  • Stainless Steel 316/316L/316Ti Buttweld Fittings
  • Stainless Steel 316/316L/316Ti Buttweld Fittings
  • Stainless Steel 316/316L/316Ti Buttweld Fittings
  • Stainless Steel 316/316L/316Ti Buttweld Fittings
Get Best Quote
Approx. Price: Rs 360 / NumberGet Latest Price
Product Brochure

Product Details:

Minimum Order Quantity360 Number
Material GradeStainless Steel 316/316L/316Ti Buttweld Fittings
MaterialStainless Steel 316/316L/316Ti Buttweld Fittings
Size1/2 INCH O 50 INCH
Usage/Application- Off-Shore Oil Drilling Companies - Power Generation - Petrochemicals - Gas Processing - Specialty
BrandStainless Steel 316/316L/316Ti Buttweld Fittings
DesignStainless Steel 316/316L/316Ti Buttweld Fittings
Country of OriginMade in India

HEUBACH INTERNATIONAL is one of the well-known supplier and distributor for SS 316 / 316L Butt Weld Pipe Fittings, which is being offered in different sizes and shapes to our clients. In addition to having an excellent track record for recyclability and end of life recapture rates, our Stainless Steel 316 Elbow also meets another important criterion of a sustainable material. If the right stainless steel is selected to match the corrosion conditions of the environment, these Stainless Steel 316 Tee Pipe Fittings can typically meet the lifetime needs of a project. While other materials may lose effectiveness over time, our Stainless Steel 316 Cross Pipe Fittings can retain both functionality and appearance over extended lengths of time. It has been exposed to heavy pollution for most its existence, has had very minimal cleaning, and yet these Stainless Steel 316 Reducer is still considered to be in excellent condition. Although our Stainless Steel 316 Bend Pipe Fittings.

316/316L/316Ti Stainless Steel ASTM A403 Buttweld Fittings Equivalent Grades

STANDARD

UNS

WNR.

AFNOR

EN

JIS

BS

GOST

SS 316

S31600

1.4401 / 1.4436

Z7CND17???11???02

X5CrNiMo17-12-2 / X3CrNiMo17-13-3

SUS 316

316S31 / 316S33

-

SS 316L

S31603

1.4404 / 1.4435

Z3CND17???11???02 / Z3CND18???14???03

X2CrNiMo17-12-2 / X2CrNiMo18-14-3

SUS 316L

316S11 / 316S13

03Ch17N14M3 / 03Ch17N14M2

SS 316Ti

S31635

1.4571

Z6CNDT17???123

X6CrNiMoTi17-12-2

SUS 316Ti

320S31

08Ch17N13M2T

Chemical Composition of SS 316/316L/316Ti Seamless and Welded Pipe Fittings

 

Element

C

Mn

Si

P

S

Cr

Mo

Ni

N

316
(S31600)

0.08
max

2.0
max

0.75
max

0.045
max

0.03
max

min: 16.0
max: 18.0

min: 2.0
max: 3.0

min: 10.0
max: 14.0

0.10
max

316L
(S31603)

0.03
max

2.0
max

0.75
max

0.045
max

0.03
max

min: 16.0
max: 18.0

min: 2.0
max: 3.0

min: 10.0
max: 14.0

0.10
max

316TI(S31635) 

-

-

-

-

-

16.0

2.00

10.0

-

0.08

2

0.75

0.045

0.03

18.0

3.00

14.0

0.1

 

Request
Callback


Additional Information:

  • Item Code: STEEL316
  • Production Capacity: 80000
  • Delivery Time: 2 DAYS
  • Packaging Details: We focus on every procedure to assure quality, the package we usually take is pack Stainless Steel 316/316L/316Ti Buttweld Fittings with environmental poly bags, and then in free fumigation wooden cases or wooden palte. Also can accept customized package such as OEM by negotiation. We offers just about everything to meet your Stainless Steel 316/316L/316Ti Buttweld Fittings pack requirements. Lot of emphasis is placed on the packing and packaging. The product are packed in wooden corrugated boxes foiled in plastic wraps and bubble wraps. HEUBACH INTERNATIONAL is focusing on to complete requirements and to deliver perfectly suitable solutions to our clients. We pack these product in suitable packing material to protect Bars form any damage in transport. By choosing the fastest way of shipping, we ensure the on-time delivery of orders. We are offering these Bars with convenient doorstep service, proper packing, fast shipping, and at reasonable rates. We are here to provide excellence in minimum time and standards. While packaging we attach some documents and reports along with supply made products that show the quality of our offered range of products. The packaging of this product is done by big bundles with the individual wrapping of plastic film which protects from contaminations.
Yes! I am Interested

Stainless Steel 317/ 317L Buttweld Fittings

Stainless Steel 317/ 317L Buttweld Fittings
  • Stainless Steel 317/ 317L Buttweld Fittings
  • Stainless Steel 317/ 317L Buttweld Fittings
  • Stainless Steel 317/ 317L Buttweld Fittings
  • Stainless Steel 317/ 317L Buttweld Fittings
  • Stainless Steel 317/ 317L Buttweld Fittings
  • Stainless Steel 317/ 317L Buttweld Fittings
  • Stainless Steel 317/ 317L Buttweld Fittings
  • Stainless Steel 317/ 317L Buttweld Fittings
  • Stainless Steel 317/ 317L Buttweld Fittings
  • Stainless Steel 317/ 317L Buttweld Fittings
Get Best Quote
Approx. Price: Rs 430 / NumberGet Latest Price
Product Brochure

Product Details:

Minimum Order Quantity430 Number
Material GradeStainless Steel 317/ 317L Buttweld Fittings
MaterialStainless Steel 317/ 317L Buttweld Fittings
Size1/2 INCH O 50 INCH
Usage/Application- Off-Shore Oil Drilling Companies - Power Generation - Petrochemicals - Gas Processing - Specialty
BrandStainless Steel 317/ 317L Buttweld Fittings
DesignStainless Steel 317/ 317L Buttweld Fittings
Country of OriginMade in India

HEUBACH INTERNATIONAL is one of the prominent distributor and seller of high quality Stainless Steel 317/ 317L Buttweld Fittings, which has excellent general corrosion resistance and is superior in most environments. Stainless Steel 317 Elbow Butt Weld Pipe Fittings has excellent resistance to localised corrosion including inter – granular, pitting and crevice corrosion, where the CPT is generally at least 35 Degree C. Stainless Steel 317/ 317L Buttweld Fittings is also resistant to chloride stress corrosion cracking at temperatures of up to about 150 Degree C. Stainless Steel 317 Tee Butt Weld Pipe Fittings will often perform well in environments which cause premature failure of austenitic grades. Stainless Steel 317 Cross Butt Weld Pipe Fittings has better resistance to sea water than grade 316. Although stainless steel has good high temperature oxidation resistance, Stainless Steel 317 Bend Butt Weld Pipe Fittings suffer from embrittlement if held for even short times at temperatures above 270 Degree C. If embrittled, Stainless Steel 317/ 317L Buttweld Fittings can only be rectified by a full solution annealing treatment. Because of its high strength.         

317/ 317L Stainless Steel ASTM A403 Buttweld Fittings Equivalent Grades

STANDARD

UNS

WNR.

EN

JIS

SS 317

S31700

1.4449

-

SUS 317

SS 317L

S31703

1.4438

X2CrNiMo18-15-4

SUS 317L

 

Chemical Composition of Stainless Steel 317/ 317L Seamless and Welded Pipe Fittings

Grade

C

Mn

Si

P

S

Cr

Mo

Ni

N

317

0.08 max

2 max

1 max

0.040 max

0.03 max

18 – 20

3 – 4

11 – 14

-

317L

0.035 max

2 max

1 max

0.040 max

0.03 max

18 – 20

3 – 4

11 – 15

-

Mechanical Properties Of ASME SA403 SS WP317 / 317L Buttweld Pipe Fittings

Density 

8.0 g/cm3

Melting Point 

1454 °C (2650 °F)

Tensile Strength 

Psi – 75000 , MPa – 515

Yield Strength (0.2%Offset) 

Psi – 30000 , MPa – 205

Elongation 

35 %

 

Our ASTM A403 WP317 / 317L Stainless Steel Butt weld Pipe Fittings are used in a wide range of applications and various industries. Below are a few of them:

·         Petrochemical Industry

·         Oil and Gas Industry

·         Chemical Industry

 

Request
Callback


Additional Information:

  • Item Code: STEEL317
  • Production Capacity: 70000
  • Delivery Time: 2 DAYS
  • Packaging Details: We focus on every procedure to assure quality, the package we usually take is pack Stainless Steel 317/ 317L Buttweld Fittings with environmental poly bags, and then in free fumigation wooden cases or wooden palte. Also can accept customized package such as OEM by negotiation. We offers just about everything to meet your Stainless Steel 317/ 317L Buttweld Fittings pack requirements. Lot of emphasis is placed on the packing and packaging. The product are packed in wooden corrugated boxes foiled in plastic wraps and bubble wraps. HEUBACH INTERNATIONAL is focusing on to complete requirements and to deliver perfectly suitable solutions to our clients. We pack these product in suitable packing material to protect Bars form any damage in transport. By choosing the fastest way of shipping, we ensure the on-time delivery of orders. We are offering these Bars with convenient doorstep service, proper packing, fast shipping, and at reasonable rates. We are here to provide excellence in minimum time and standards. While packaging we attach some documents and reports along with supply made products that show the quality of our offered range of products. The packaging of this product is done by big bundles with the individual wrapping of plastic film which protects from contaminations.
Yes! I am Interested

Stainless Steel 321/321H Buttweld Fittings

Stainless Steel 321/321H Buttweld Fittings
  • Stainless Steel 321/321H Buttweld Fittings
  • Stainless Steel 321/321H Buttweld Fittings
  • Stainless Steel 321/321H Buttweld Fittings
  • Stainless Steel 321/321H Buttweld Fittings
  • Stainless Steel 321/321H Buttweld Fittings
  • Stainless Steel 321/321H Buttweld Fittings
  • Stainless Steel 321/321H Buttweld Fittings
  • Stainless Steel 321/321H Buttweld Fittings
  • Stainless Steel 321/321H Buttweld Fittings
  • Stainless Steel 321/321H Buttweld Fittings
  • Stainless Steel 321/321H Buttweld Fittings
Get Best Quote
Approx. Price: Rs 275 / NumberGet Latest Price
Product Brochure

Product Details:

Minimum Order Quantity275 Number
Material GradeStainless Steel 321/321H Buttweld Fittings
MaterialStainless Steel 321/321H Buttweld Fittings
Size1/2 INCH O 50 INCH
Usage/Application- Off-Shore Oil Drilling Companies - Power Generation - Petrochemicals - Gas Processing - Specialty
BrandStainless Steel 321/321H Buttweld Fittings
Country of OriginMade in India

HEUBACH INTERNATIONAL is a well-known firm that supplies a wide range of SS 321 / 321H Butt Weld Fittings, which is non-magnetic and offered in different sizes. This Stainless Steel 321 Butt Weld Fittings is often used in super-heater and afterburner parts, along with compensators and expansion bellows. Our Stainless Steel 321H Butt Weld Fittings is used extensively for applications where the addition of titanium and its stabilizing effect as a carbide forming element allows it to be welded and / or used within the carbide precipitation range 430 Degree C – 870 Degree C without the risk of inter-granular corrosion. This Stainless Steel 321 Pipe Fittings is well known in reference literature and more information can be obtained in this way. Our Stainless Steel 321H Pipe Fittings is also used in refinery equipment and high temperature chemical process equipment. Titanium addition in this Stainless Steel 321 Elbow is made to reduce or eliminate chromium carbide precipitation – resulting from welding or exposure to high temperatures. Our Stainless Steel 321H Tee is as well used for heating element tubing and heat exchangers. This Stainless Steel 321 Reducer is used extensively in the aircraft and missile industries. Our Stainless Steel 321H Cross is often used in Expansion joints and Pharmaceutical production. These Stainless Steel 321Bend is very resistant to oxidation and inter-granular corrosion up to 850 º C in dry air service conditions.                                          

321/321H Stainless Steel ASTM A403 Buttweld Fittings Equivalent Grades

STANDARD

UNS

WNR.

EN

JIS

SS 321

S32100

1.4541

X6CrNiTi18-10

SUS 321

SS 321H

S32109

1.4878

X12CrNiTi18-9

SUS 321H

Chemical Composition of Stainless Steel 321/321H Seamless and Welded Pipe Fittings

%

Cr

Ni

C

Si

Mn

P

S

N

Ti

Fe

321

min:17.0
max:19.0

min: 9.0
max:12.0

max:0.08

max:0.75

max:2.0

max:0.045

max:0.03

max:0.10

min:5*(C+N)
max:0.70

Balance

321H

min:17.0
max:19.0

min: 9.0
max:12.0

min:0.04
max:0.10

min:18.0
max:20.0

max:2.0

max:0.045

max:0.03

max:0.10

min:5*(C+N)
max:0.70

Balance

Mechanical Properties Of ASME SA403 SS WP321 / 321H Buttweld Pipe Fittings

Grade

Tensile Strength
ksi (min.)

Yield Strength 0.2%
Offset ksi (min.)

Elongation -
% in
50 mm (min.)

Hardness
(Brinell) MAX

321/321H

75

30

40

217

Request
Callback


Additional Information:

  • Production Capacity: 75000
  • Delivery Time: 2 DAYS
  • Packaging Details: We focus on every procedure to assure quality, the package we usually take is pack Stainless Steel 321/321H Buttweld Fittings with environmental poly bags, and then in free fumigation wooden cases or wooden palte. Also can accept customized package such as OEM by negotiation. We offers just about everything to meet your Stainless Steel 321/321H Buttweld Fittings pack requirements. Lot of emphasis is placed on the packing and packaging. The product are packed in wooden corrugated boxes foiled in plastic wraps and bubble wraps. HEUBACH INTERNATIONAL is focusing on to complete requirements and to deliver perfectly suitable solutions to our clients. We pack these product in suitable packing material to protect Bars form any damage in transport. By choosing the fastest way of shipping, we ensure the on-time delivery of orders. We are offering these Bars with convenient doorstep service, proper packing, fast shipping, and at reasonable rates. We are here to provide excellence in minimum time and standards. While packaging we attach some documents and reports along with supply made products that show the quality of our offered range of products. The packaging of this product is done by big bundles with the individual wrapping of plastic film which protects from contaminations.
Yes! I am Interested

Stainless Steel 310/310S Buttweld Fittings

Stainless Steel 310/310S Buttweld Fittings
  • Stainless Steel 310/310S Buttweld Fittings
  • Stainless Steel 310/310S Buttweld Fittings
  • Stainless Steel 310/310S Buttweld Fittings
  • Stainless Steel 310/310S Buttweld Fittings
  • Stainless Steel 310/310S Buttweld Fittings
  • Stainless Steel 310/310S Buttweld Fittings
  • Stainless Steel 310/310S Buttweld Fittings
  • Stainless Steel 310/310S Buttweld Fittings
  • Stainless Steel 310/310S Buttweld Fittings
Get Best Quote
Approx. Price: Rs 480 / NumberGet Latest Price
Product Brochure

Product Details:

Minimum Order Quantity40 Number
Material GradeStainless Steel 310/310S Buttweld Fittings
MaterialStainless Steel 310/310S Buttweld Fittings
Size1/2 INCH O 50 INCH
Usage/Application- Off-Shore Oil Drilling Companies - Power Generation - Petrochemicals - Gas Processing - Specialty
BrandStainless Steel 310/310S Buttweld Fittings
Country of OriginMade in India

HEUBACH INTERNATIONAL is one of the well-known trader and supplier for high quality Stainless Steel 310/310S Buttweld Fittings, which is used widely in the construction of roads, railways, other infrastructure, appliances, and buildings. Stainless Steel 310 Elbow Butt Weld Pipe Fittings is also used for most large modern structures, such as stadiums and skyscrapers, bridges, and airports. Even those with a concrete structure employ Stainless Steel 310S Tee Butt Weld Pipe Fittings for reinforcing, where in addition it sees widespread use in major appliances and cars. Stainless Steel 310/310S Buttweld Fittings is a mixture of several metals but most of it is iron, which is harder and stronger than iron. Stainless Steel 310S Cross Butt Weld Pipe Fittings are often iron alloys with between 0.02 % and 1.7 % percent carbon by weight. Stainless Steel 310 Bend Butt Weld Pipe Fittings with more carbon than this are known as cast iron, in which carbon is replaced with other alloying materials. Stainless Steel 310S Stub End is different from wrought iron that has little or no carbon, where variations and combinations of production routes also exist. Stainless Steel 310/310S Buttweld Fittings is an alloy of iron and carbon containing less than 2 % carbon and 1 % manganese and small amounts of silicon, phosphorus, sulphur and oxygen.

309/310/310S Stainless Steel ASTM A403 Buttweld Fittings Equivalent Grades

STANDARD

UNS

WNR.

AFNOR

EN

JIS

BS

GOST

SS 309

S30900

1.4833

-

-

-

-

-

SS 310

S31000

1.4841

-

X2CrNi18-9 / X2CrNi19-11

SUS 310

310S24

20Ch25N20S2

SS 310S

S31008

1.4845

-

X8CrNi25-21

SUS 310S

310S16

20Ch23N18

Mechanical Properties Of ASME SA403 SS WP309 / 310/ 310S Buttweld Pipe Fittings

Element

SS 309

SS 310

SS 310S

Tensile Strength

Psi – 89900 , MPa – 620

Psi – 75000 , MPa – 515

Psi – 75000 , MPa – 515

Yield Strength (0.2%Offset)

Psi – 45000 , MPa – 310

Psi – 30000 , MPa – 205

Psi – 30000 , MPa – 205

Elongation

45 %

35 %

35 %

Physical Properties of ASTM A403 Stainless Steel 309/310/310S Pipe Fittings

SS 309

SS 310

SS 310

Density

8.0 g/cm3

8.0 g/cm3

8.0 g/cm3

Melting Point

1455 °C (2650 °F)

1454 °C (2650 °F)

1454 °C (2650 °F)

Request
Callback


Additional Information:

  • Item Code: STEEL310
  • Production Capacity: 85000
  • Delivery Time: 2 DAYS
  • Packaging Details: We focus on every procedure to assure quality, the package we usually take is pack Stainless Steel 310/310S Buttweld Fittings with environmental poly bags, and then in free fumigation wooden cases or wooden palte. Also can accept customized package such as OEM by negotiation. We offers just about everything to meet your Stainless Steel 310/310S Buttweld Fittings pack requirements. Lot of emphasis is placed on the packing and packaging. The product are packed in wooden corrugated boxes foiled in plastic wraps and bubble wraps. HEUBACH INTERNATIONAL is focusing on to complete requirements and to deliver perfectly suitable solutions to our clients. We pack these product in suitable packing material to protect Bars form any damage in transport. By choosing the fastest way of shipping, we ensure the on-time delivery of orders. We are offering these Bars with convenient doorstep service, proper packing, fast shipping, and at reasonable rates. We are here to provide excellence in minimum time and standards. While packaging we attach some documents and reports along with supply made products that show the quality of our offered range of products. The packaging of this product is done by big bundles with the individual wrapping of plastic film which protects from contaminations.
Yes! I am Interested

Stainless Steel 304/304L/304H Butt Weld Fittings

Stainless Steel 304/304L/304H Butt Weld Fittings
  • Stainless Steel 304/304L/304H Butt Weld Fittings
  • Stainless Steel 304/304L/304H Butt Weld Fittings
  • Stainless Steel 304/304L/304H Butt Weld Fittings
  • Stainless Steel 304/304L/304H Butt Weld Fittings
  • Stainless Steel 304/304L/304H Butt Weld Fittings
  • Stainless Steel 304/304L/304H Butt Weld Fittings
  • Stainless Steel 304/304L/304H Butt Weld Fittings
  • Stainless Steel 304/304L/304H Butt Weld Fittings
  • Stainless Steel 304/304L/304H Butt Weld Fittings
  • Stainless Steel 304/304L/304H Butt Weld Fittings
Get Best Quote
Approx. Price: Rs 250 / NumberGet Latest Price
Product Brochure

Product Details:

Minimum Order Quantity250 Number
Material GradeStainless Steel 304/304L/304H Buttweld Fittings
MaterialStainless Steel 304/304L/304H Buttweld Fittings
Size1/2 INCH O 50 INCH
Usage/Application- Off-Shore Oil Drilling Companies - Power Generation - Petrochemicals - Gas Processing - Specialty
BrandStainless Steel 304/304L/304H Buttweld Fittings
DesignStainless Steel 304/304L/304H Buttweld Fittings
Country of OriginMade in India

HEUBACH INTERNATIONAL is one of the pioneer whole seller & dealer of Stainless Steel 304/304L/304H Buttweld Fittings, which is a molybdenum bearing austenitic stainless steel that provides improved corrosion resistance. These Stainless Steel 304 Tee Pipe Fittings is non – magnetic in the annealed condition but may become slightly magnetic as a result of welding. Stainless Steel 304 Stub End Pipe Fittings has excellent corrosion resistance in a wide range of chemicals, especially in acidic chloride environments such as those encountered in pulp and paper mills. Increased levels of chromium, molybdenum and nickel in these Stainless Steel 304/304L/304H Buttweld Fittings, improve resistance to chloride pitting and general corrosion. Resistance of Stainless Steel 304 Dish Cap Pipe Fittings increases with molybdenum alloy content, which is further resistant to sulphuric acid concentrations up to 5 percent at temperatures as high as 120 Degree F (49 Degree C). At temperatures under 100 Degree F (38 Degree C), these Stainless Steel 304/304L/304H Buttweld Fittings has excellent resistance to solutions of higher concentration. However, service tests in Stainless Steel 304 Short Radius Elbow Pipe Fittings are recommended to account for the effects of specific operating conditions that may affect corrosion behaviour. In processes where condensation of sulphur – bearing gases occurs, these Stainless Steel 304/304L/304H Buttweld FittingsPipe Fittings is much more resistant to attack at the point of condensation than conventional alloy 316.

304/304L/304H Stainless Steel ASTM A403 Buttweld Fittings Equivalent Grades

STANDARD

UNS

WNR.

AFNOR

EN

JIS

BS

GOST

SS 304

S30400

1.4301

Z7CN18???09

X5CrNi18-10

SUS 304

304S31

08??18??10

SS 304L

S30403

1.4306/1.4307

Z3CN18???10

X2CrNi18-9 / X2CrNi19-11

SUS 304L

304S11

03??18??11

SS 304H

S30409

1.4301

-

-

-

-

-


Chemical Composition of SS 304/304L/304H Seamless and Welded Pipe Fittings

C

Mn

Si

P

S

Cr

Ni

N

304

0.07max

2.0max

0.75max

0.045max

0.03max

min: 18.0 max: 20.0

min: 8.0 max: 10.5

304L

0.03max

2.0max

0.75max

0.045max

0.03max

min: 18.0 max: 20.0

min: 8.0 max: 12.0

0.10 max

304H

min: 18.0
max:20.0

min: 8.0
max: 10.5

min: 0.04
max:0.10

0.75
max

2.0
max

0.045
max

0.03
max

0.10
max

 

Request
Callback


Additional Information:

  • Item Code: STEEL304
  • Production Capacity: 90000
  • Delivery Time: 2 DAYS
  • Packaging Details: We focus on every procedure to assure quality, the package we usually take is pack Stainless Steel 304/304L/304H Buttweld Fittings with environmental poly bags, and then in free fumigation wooden cases or wooden palte. Also can accept customized package such as OEM by negotiation. We offers just about everything to meet your Stainless Steel 304/304L/304H Buttweld Fittings pack requirements. Lot of emphasis is placed on the packing and packaging. The product are packed in wooden corrugated boxes foiled in plastic wraps and bubble wraps. HEUBACH INTERNATIONAL is focusing on to complete requirements and to deliver perfectly suitable solutions to our clients. We pack these product in suitable packing material to protect Bars form any damage in transport. By choosing the fastest way of shipping, we ensure the on-time delivery of orders. We are offering these Bars with convenient doorstep service, proper packing, fast shipping, and at reasonable rates. We are here to provide excellence in minimum time and standards. While packaging we attach some documents and reports along with supply made products that show the quality of our offered range of products. The packaging of this product is done by big bundles with the individual wrapping of plastic film which protects from contaminations.
Yes! I am Interested

Stainless Steel 347/347H Butt Weld Fittings

Stainless Steel 347/347H Butt Weld Fittings
  • Stainless Steel 347/347H Butt Weld Fittings
  • Stainless Steel 347/347H Butt Weld Fittings
  • Stainless Steel 347/347H Butt Weld Fittings
  • Stainless Steel 347/347H Butt Weld Fittings
  • Stainless Steel 347/347H Butt Weld Fittings
  • Stainless Steel 347/347H Butt Weld Fittings
  • Stainless Steel 347/347H Butt Weld Fittings
  • Stainless Steel 347/347H Butt Weld Fittings
  • Stainless Steel 347/347H Butt Weld Fittings
  • Stainless Steel 347/347H Butt Weld Fittings
Get Best Quote
Approx. Price: Rs 340 / NumberGet Latest Price
Product Brochure

Product Details:

Minimum Order Quantity85000 Number
Material GradeStainless Steel 347/347H Buttweld Fittings
MaterialStainless Steel 347/347H Buttweld Fittings
Size1/2 INCH O 50 INCH
Usage/Application- Off-Shore Oil Drilling Companies - Power Generation - Petrochemicals - Gas Processing - Specialty
BrandStainless Steel 347/347H Buttweld Fittings
DesignStainless Steel 347/347H Buttweld Fittings
Country of OriginMade in India

HEUBACH INTERNATIONAL is one of the prominent distributor and dealer of Stainless Steel 347/347H Buttweld Fittings, which has excellent corrosion resistance properties. Stainless Steel 347 Elbow Pipe Fittings is an austenitic stainless steel with a nominal composition of 17 percent chromium and 7 percent nickel, which provides good strength and ductility when cold worked. Stainless Steel 347/347H Buttweld Fittings is well suited to welding and forming and drawing, where the high strength grade of steel is available in several conditions or tempers. Stainless Steel 347 Cross Pipe Fittings is used in the annealed and cold rolled conditions. In the work – hardened condition, Stainless Steel 347 Tee Pipe Fittings develops higher tensile strength than the other stable austenitic grades. Stainless Steel 347/347H Buttweld Fittings has a tensile strength and minimum yield strength. Stainless Steel 347 Stub End Pipe Fittings is a non – magnetic grade that is not hardenable by heat treating, and is generally used in the annealed condition and is noted for its ease of fabrication and formability. Stainless Steel 347 End Cap Pipe Fittings is austenitic free – machining stainless steel which is used primarily for parts requiring machining, grinding or polishing. Stainless Steel 347/347H Buttweld Fittings was purposefully developed for ease of machining. The additional sulphur present in Stainless Steel 347 Lateral Tee Pipe Fittings assists in breaking up turnings.

347/347H Stainless Steel ASTM A403 Buttweld Fittings Equivalent Grades

STANDARD

UNS

WNR.

EN

JIS

GOST

SS 347

S34700

1.4550

X6CrNiNb18-10

SUS 347

08Ch18N12B

SS 347H

S34709

1.4961

X6CrNiNb18-12

SUS 347H

-

Chemical Composition of Stainless Steel 347/347H Seamless and Welded Pipe Fittings

Element

C

Cr

Mn

Ni

P

S

Si

Cb/Ta

SS 347

0.08 max

min: 17.0
max: 20.0

2.0 max

min: 9.0
max: 13.0

0.04 max

0.30
max

0.75
max

min:10x C
max: 1.0

SS 347H

min: 0.04
max: 0.10

min: 17.0
max: 20.0

2.0 max

min: 9.0
max: 13.0

0.03 max

0.30
max

0.75
max

min:10x C
max: 1.0

Mechanical Properties Of ASME SA403 SS WP347 / 347H Buttweld Pipe Fittings

Grade

Tensile Strength ksi (MPa) min

Yield Strength 0.2% ksi offset ksi (MPa) min

Elongation (% in 50mm) min

Hardness (Brinell) MAX

Hardness (Rockwell B) MAX

347/347H

75
(515)

30
(205)

40

201

95

Request
Callback


Additional Information:

  • Production Capacity: 340
  • Delivery Time: 2 DAYS
  • Packaging Details: We focus on every procedure to assure quality, the package we usually take is pack Stainless Steel 347/347H Buttweld Fittings with environmental poly bags, and then in free fumigation wooden cases or wooden palte. Also can accept customized package such as OEM by negotiation. We offers just about everything to meet your Stainless Steel 347/347H Buttweld Fittings pack requirements. Lot of emphasis is placed on the packing and packaging. The product are packed in wooden corrugated boxes foiled in plastic wraps and bubble wraps. HEUBACH INTERNATIONAL is focusing on to complete requirements and to deliver perfectly suitable solutions to our clients. We pack these product in suitable packing material to protect Bars form any damage in transport. By choosing the fastest way of shipping, we ensure the on-time delivery of orders. We are offering these Bars with convenient doorstep service, proper packing, fast shipping, and at reasonable rates. We are here to provide excellence in minimum time and standards. While packaging we attach some documents and reports along with supply made products that show the quality of our offered range of products. The packaging of this product is done by big bundles with the individual wrapping of plastic film which protects from contaminations.
Yes! I am Interested

Stainless Steel 904L Butt Weld Fittings

Stainless Steel 904L Butt Weld Fittings
  • Stainless Steel 904L Butt Weld Fittings
  • Stainless Steel 904L Butt Weld Fittings
  • Stainless Steel 904L Butt Weld Fittings
  • Stainless Steel 904L Butt Weld Fittings
  • Stainless Steel 904L Butt Weld Fittings
  • Stainless Steel 904L Butt Weld Fittings
  • Stainless Steel 904L Butt Weld Fittings
  • Stainless Steel 904L Butt Weld Fittings
  • Stainless Steel 904L Butt Weld Fittings
  • Stainless Steel 904L Butt Weld Fittings
Get Best Quote
Approx. Price: Rs 1,850 / NumberGet Latest Price
Product Brochure

Product Details:

Minimum Order Quantity1850 Number
Material GradeStainless Steel 904L Buttweld Fittings
MaterialStainless Steel 904L Buttweld Fittings
Size1/2 INCH O 50 INCH
Usage/Application- Off-Shore Oil Drilling Companies - Power Generation - Petrochemicals - Gas Processing - Specialty
BrandStainless Steel 904L Buttweld Fittings
DesignStainless Steel 904L Buttweld Fittings
Country of OriginMade in India

HEUBACH INTERNATIONAL is one of the pioneer distributor and trader for SS 904L Butt Weld Pipe Fittings, which is supplied in a range of different conditions / tempers depending on the level of strength required. Stainless Steel 904L Elbow is chromium – nickel stainless steel and with the addition of titanium, and is resistant to inter – granular corrosion. General corrosion of Stainless Steel 904L Reducer Pipe Fittings is less than SS 904, and is resistance to a variety of corrosive media. Stainless Steel 904L Tee Pipe Fittings is used where resistance to inter – granular corrosion is required and where the parts are subjected to sustained heating or cooling within the range of 800 Degree F to 1500 Degree F. Stainless Steel 904L Cross Pipe Fittings is commonly used in applications such as exhaust stacks, manifolds and ring collectors. Stainless Steel 904L Bend Pipe Fittings has good resistance to atmosphere corrosion and its bright attractive surface makes it an excellent choice for decorative structural applications. Stainless Steel 904L Stub End has good resistance to oxidation at temperatures up to 1550 Degree F, but is not recommended for use above 1600 Degree F. However, the corrosion resistance properties of Stainless Steel 904L End Cap are not as good as the 18 – 8 c.

Specifications

:

ASTM B366 / ASME SB366

Size

:

1/8” NB TO 48” NB. (Seamless & 100% X-Ray Welded, Fabricated)

Standards

:

ASME/ANSI B16.9, ASME B16.28, MSS-SP-43

Thickness

:

5s, 10s, 40s, 80s, 10, 20, 40, STD, 60, 80, XS, 100, 120, 140, 160, XXS available with NACE MR 01-75

Type

:

Seamless / Welded / Fabricated

904L Stainless Steel ASTM A366 Buttweld Fittings Equivalent Grades

STANDARD 

WERKSTOFF NR. 

UNS 

JIS 

KS 

BS 

AFNOR 

EN 

SS 904L

1.4539

N08904

SUS 904L

STS 317J5L

904S13

Z2 NCDU 25-20

X1NiCrMoCu25-20-5

Chemical Composition of Stainless Steel 904L Seamless and Welded Pipe Fittings

C

Cr

Cu

Mn

Mo

Ni

P

S

Max

 

 

Max

 

 

Max

Max

0.02

19.0-23.0

2.0

4.0-5.0

23.0-28.0

0.045

0.035

1.0

Request
Callback


Additional Information:

  • Item Code: STEEL904L
  • Production Capacity: 80000
  • Delivery Time: 2 DAYS
  • Packaging Details: We focus on every procedure to assure quality, the package we usually take is pack Stainless Steel 904L Buttweld Fittings with environmental poly bags, and then in free fumigation wooden cases or wooden palte. Also can accept customized package such as OEM by negotiation. We offers just about everything to meet your Stainless Steel 904L Buttweld Fittings pack requirements. Lot of emphasis is placed on the packing and packaging. The product are packed in wooden corrugated boxes foiled in plastic wraps and bubble wraps. HEUBACH INTERNATIONAL is focusing on to complete requirements and to deliver perfectly suitable solutions to our clients. We pack these product in suitable packing material to protect Bars form any damage in transport. By choosing the fastest way of shipping, we ensure the on-time delivery of orders. We are offering these Bars with convenient doorstep service, proper packing, fast shipping, and at reasonable rates. We are here to provide excellence in minimum time and standards. While packaging we attach some documents and reports along with supply made products that show the quality of our offered range of products. The packaging of this product is done by big bundles with the individual wrapping of plastic film which protects from contaminations.
Yes! I am Interested

Inconel 600/601/625 Butt Weld Fittings

Inconel 600/601/625 Butt Weld Fittings
  • Inconel 600/601/625 Butt Weld Fittings
  • Inconel 600/601/625 Butt Weld Fittings
  • Inconel 600/601/625 Butt Weld Fittings
  • Inconel 600/601/625 Butt Weld Fittings
  • Inconel 600/601/625 Butt Weld Fittings
  • Inconel 600/601/625 Butt Weld Fittings
  • Inconel 600/601/625 Butt Weld Fittings
  • Inconel 600/601/625 Butt Weld Fittings
  • Inconel 600/601/625 Butt Weld Fittings
  • Inconel 600/601/625 Butt Weld Fittings
Get Best Quote
Approx. Price: Rs 2,200 / NumberGet Latest Price
Product Brochure

Product Details:

Minimum Order Quantity2200 Number
Material GradeInconel 600/601/625 Buttweld Fittings
MaterialInconel 600/601/625 Buttweld Fittings
Size1/2 INCH O 50 INCH
Usage/Application- Off-Shore Oil Drilling Companies - Power Generation - Petrochemicals - Gas Processing - Specialty
BrandInconel 600/601/625 Buttweld Fittings
StandardInconel 600/601/625 Buttweld Fittings
DensityInconel 600/601/625 Buttweld Fittings

HEUBACH INTERNATIONAL offers a wide range of Inconel 600/601/625 Buttweld Fittings which are known for its good resistance to pressure and temperature. Inconel 600/601/625 Buttweld Fittings has excellent mechanical properties and Good Oxidation Resistance. Inconel 600 Long Radius Elbow Pipe Fittings has both hot and cold workability and resistance to ordinary forms of corrosion. Inconel 600 Short Radius Elbow Pipe Fittings is used in a variety of corrosion resisting applications and long been used in the heat treating industry for many of the same applications as Inconel RA330 Bends. Inconel 600/601/625 Buttweld Fittings has excellent resistance to chloride – ion stress – corrosion cracking and also displays good heat resistance. Inconel 600 Eccentric Reducer Pipe Fittings is a nickel – chromium alloy with good oxidation resistance at higher temperatures, with good resistance in carburizing and chloride containing environments. Inconel 600/601/625 Buttweld Fittings Pipe Fittings is a nonmagnetic and nickel-based high temperature alloy possessing an excellent combination of high strength, hot and cold workability, and resistance to ordinary form of corrosion. Inconel 600 Unequal Tee Pipe Fittings has Good Corrosion Resistance at High Temperatures and is also used at High temperature static applications. Inconel 600 Lateral Tee Pipe Fittings is a standard engineering material for applications which require resistance to corrosion and heat. Meanwhile, these Inconel 600 Cross Pipe Fittings.  

600/601/625 Inconel ASTM B366 Buttweld Fittings Equivalent Grades

STANDARD

WERKSTOFF NR.

UNS

JIS

BS

GOST

AFNOR

EN

Inconel 600

2.4816

N06600

NCF 600

NA 13

?????????? 28-2,5-1,5

NC15FE11M

NiCr15Fe

Inconel 601

2.4851

N06601

NCF 601

NA 49

XH60BT

NC23FeA

NiCr23Fe

Inconel 625

2.4856

N06625

NCF 625

NA 21

????75????????

NC22DNB4M

NiCr22Mo9Nb

Chemical Composition of Inconel Alloy Seamless and Welded Pipe Fittings

Grade

C

Mn

Si

S

Cu

Fe

Ni

Cr

Inconel 600

0.15 max

1.00 max

0.50 max

0.015max

0.50 max

6.00 – 10.00

72.00 min

14.00 – 17.00

Inconel 601

0.10 max

1.0 max

0.5 max

0.015 max

1.0 max

Balance

58.0 – 63.0

21.0 – 25.0

Inconel 625

0.10 max

0.50 max

0.50 max

0.015 max

-

5.0 max

58.0 min

20.0 - 23.0

 

Request
Callback


Additional Information:

  • Item Code: 601FITINGS
  • Production Capacity: 75000
  • Delivery Time: 2 DAYS
  • Packaging Details: We focus on every procedure to assure quality, the package we usually take is pack Inconel 600/601/625 Buttweld Fittings with environmental poly bags, and then in free fumigation wooden cases or wooden palte. Also can accept customized package such as OEM by negotiation. We offers just about everything to meet your Inconel 600/601/625 Buttweld Fittings requirements. Lot of emphasis is placed on the packing and packaging. The product are packed in wooden corrugated boxes foiled in plastic wraps and bubble wraps. HEUBACH INTERNATIONAL is focusing on to complete requirements and to deliver perfectly suitable solutions to our clients. We pack these product in suitable packing material to protect Bars form any damage in transport. By choosing the fastest way of shipping, we ensure the on-time delivery of orders. We are offering these Bars with convenient doorstep service, proper packing, fast shipping, and at reasonable rates. We are here to provide excellence in minimum time and standards. While packaging we attach some documents and reports along with supply made products that show the quality of our offered range of products. The packaging of this product is done by big bundles with the individual wrapping of plastic film which protects from contaminations.
Yes! I am Interested

Inconel 718 Butt Weld Fittings

Inconel 718 Butt Weld Fittings
  • Inconel 718 Butt Weld Fittings
  • Inconel 718 Butt Weld Fittings
  • Inconel 718 Butt Weld Fittings
  • Inconel 718 Butt Weld Fittings
  • Inconel 718 Butt Weld Fittings
  • Inconel 718 Butt Weld Fittings
  • Inconel 718 Butt Weld Fittings
  • Inconel 718 Butt Weld Fittings
  • Inconel 718 Butt Weld Fittings
  • Inconel 718 Butt Weld Fittings
Get Best Quote
Approx. Price: Rs 2,450 / NumberGet Latest Price
Product Brochure

Product Details:

Minimum Order Quantity2450 Number
Material GradeInconel 718 Buttweld Fittings
MaterialInconel 718 Buttweld Fittings
Size1/2 INCH O 50 INCH
Usage/Application- Off-Shore Oil Drilling Companies - Power Generation - Petrochemicals - Gas Processing - Specialty
BrandInconel 718 Buttweld Fittings
DensityInconel 718 Buttweld Fittings

Being pioneers of the industry, HEUBACH INTERNATIONAL offers a wide assortment of Inconel 718 Butt Weld Pipe Fittings to the clients. Inconel 718 Pipe Fittings is a Nickel – Chromium alloy being precipitation hardenable and having high creep – rupture strength at high temperatures to about 700 Degree C. Inconel 718 Cross Pipe Fittings is a nickel – based super alloy that is well suited for applications requiring high strength in temperature ranges from cryogenic up to 1400 Degree F. Inconel 718 Elbow Pipe Fittings has excellent weldability when compared to the nickel-base super – alloys hardened by aluminum and titanium. Inconel 718 Tee Pipe Fittings combines corrosion resistance and high strength with outstanding weldability, including resistance to post – weld cracking. Meanwhile, these Inconel 718 Reducer Pipe Fittings are also being offered in different sizes and shapes to our customers. Inconel 718 Stub End Pipe Fittings can be readily worked and age hardened, where further improvements are coming with the rising interest of aerospace industry towards additive layer manufacturing of ever more critical components. Inconel 718 Bends Pipe Fittings has excellent weldability.

Specifications

:

ASTM B366 / ASME SB366

Size

:

Seamless Butt Weld Fittings: 1/2″ – 10″, Welded Butt Weld Fittings: 1/2″ – 48″

Standards

:

ASME/ANSI B16.9, ASME B16.28, MSS-SP-43

Thickness

:

5s, 10s, 40s, 80s, 10, 20, 40, STD, 60, 80, XS, 100, 120, 140, 160, XXS available with NACE MR 01-75

Type

:

Seamless / Welded / Fabricated

Inconel 718 Pipe Fittings Chemical Composition

Grade

C

Mn

Si

Fe

S

Cr

Al

Ni

718

min.

bal

17.0

0.2

50.0

max.

0.08

0.35

0.35

bal

0.01

21.0

0.8

55.0

 

Inconel 718 Buttweld Fittings Mechanical Properties

Element

Density

Melting Point

Tensile Strength

Yield Strength (0.2%Offset)

Elongation

718

8.14 g/cm3

1400 °C (2550 °F)

Psi – 80,000 , MPa – 550

Psi – 32,000 , MPa – 220

30 %

Request
Callback


Additional Information:

  • Item Code: 718FITTINGS
  • Production Capacity: 90000
  • Delivery Time: 2 DAYS
  • Packaging Details: We focus on every procedure to assure quality, the package we usually take is pack Inconel 718 Buttweld Fittings with environmental poly bags, and then in free fumigation wooden cases or wooden palte. Also can accept customized package such as OEM by negotiation. We offers just about everything to meet your Inconel 718 Buttweld Fittings pack requirements. Lot of emphasis is placed on the packing and packaging. The product are packed in wooden corrugated boxes foiled in plastic wraps and bubble wraps. HEUBACH INTERNATIONAL is focusing on to complete requirements and to deliver perfectly suitable solutions to our clients. We pack these product in suitable packing material to protect Bars form any damage in transport. By choosing the fastest way of shipping, we ensure the on-time delivery of orders. We are offering these Bars with convenient doorstep service, proper packing, fast shipping, and at reasonable rates. We are here to provide excellence in minimum time and standards. While packaging we attach some documents and reports along with supply made products that show the quality of our offered range of products. The packaging of this product is done by big bundles with the individual wrapping of plastic film which protects from contaminations.
Yes! I am Interested

Incoloy 330/ SS 330/ Ra 330 Butt Weld Fittings

Incoloy 330/ SS 330/ Ra 330 Butt Weld Fittings
  • Incoloy 330/ SS 330/ Ra 330 Butt Weld Fittings
  • Incoloy 330/ SS 330/ Ra 330 Butt Weld Fittings
  • Incoloy 330/ SS 330/ Ra 330 Butt Weld Fittings
  • Incoloy 330/ SS 330/ Ra 330 Butt Weld Fittings
  • Incoloy 330/ SS 330/ Ra 330 Butt Weld Fittings
  • Incoloy 330/ SS 330/ Ra 330 Butt Weld Fittings
  • Incoloy 330/ SS 330/ Ra 330 Butt Weld Fittings
  • Incoloy 330/ SS 330/ Ra 330 Butt Weld Fittings
  • Incoloy 330/ SS 330/ Ra 330 Butt Weld Fittings
  • Incoloy 330/ SS 330/ Ra 330 Butt Weld Fittings
Get Best Quote
Approx. Price: Rs 3,000 / NumberGet Latest Price
Product Brochure

Product Details:

Minimum Order Quantity3000 Number
Material GradeIncoloy 330/ SS 330/ Ra 330 Buttweld Fittings
MaterialIncoloy 330/ SS 330/ Ra 330 Buttweld Fittings
Size1/2 INCH TO 50 INCH
Usage/Application- Off-Shore Oil Drilling Companies - Power Generation - Petrochemicals - Gas Processing - Specialty
BrandIncoloy 330/ SS 330/ Ra 330 Buttweld Fittings
DesignIncoloy 330/ SS 330/ Ra 330 Buttweld Fittings
Country of OriginMade in India

HEUBACH INTERNATIONAL offers an extensive array of Incoloy 330 / SS 330 / Ra 330 Butt Weld Pipe Fittings to the clients, which is highly resistant to corrosion and is made by using quality material. Our Inconel 330 Pipe Fittings (UNS N08330) has good strength at high temperatures and excellent resistance to carburizing and oxidizing atmospheres. These SS 330 Elbow Pipe Fittings has a solid solution composition and is not hardenable by heat treatment. The high nickel and chromium of Ra 330 Tee Pipe Fittings provide good resistance to oxidation and carburization. These Inconel 330 Reducer Pipe Fittings combines excellent resistance to carburization and oxidation at temperatures up to 2200 Degree F (1200 Degree C) with high strength. Meanwhile, SS 330 Bend Pipe Fittings are also being offered in different sizes and shapes to our customers. These Ra 330 Stub End may be forged between 2100 Degree F / 1750 Degree F (1150 Degree C / 950 Degree C), which further come in various thickness and dimension to suit the requirement of our clients. The strength and oxidation resistance of Incoloy 330 End Pipe Cap> at elevated temperatures make it a useful material for industrial heating furnaces; for conveyor systems, muffles, retorts, baskets, boxes, and various fixtures. These SS 330 Dish Cap Pipe Fittings is often used in Chemical process, Food processing, Petrochemical, etc.

Incoloy 330/ SS 330/ Ra 330 Pipe Fittings Specifications

Specifications

:

ASTM B366 / ASME SB366

Size

:

Seamless Butt Weld Fittings: 1/2″ – 10″, Welded Butt Weld Fittings: 1/2″ – 48″

Standards

:

ASME/ANSI B16.9, ASME B16.28, MSS-SP-43

Thickness

:

5s, 10s, 40s, 80s, 10, 20, 40, STD, 60, 80, XS, 100, 120, 140, 160, XXS available with NACE MR 01-75

Type

:

Seamless / Welded / Fabricated

 

Types of Incoloy 330/ SS 330/ Ra 330 Buttweld Fittings

Incoloy 330 45 Degree Elbow      

Incoloy 330 45 Degree Elbow
330 Incoloy 90 Degree Elbow
330 Incoloy 45 Degree Elbow
Incoloy UNS N08330 45 Degree Elbow
Incoloy WERKSTOFF NR.1.4886 45 Degree Elbow
ASME SB366 330 90 Degree Elbow

Incoloy 330 Pipe Fittings

Incoloy 330 Pipe Fittings
330 Incoloy Buttweld Fitting
330 Incoloy Pipe Fitting
Incoloy UNS N08330 Buttweld Fitting
Incoloy WERKSTOFF NR. 1.4886 Pipe Fittings
ASTM B366 330 Incoloy Buttweld Fitting

Incoloy 330 Eccentric Reducer     

Alloy 330 Eccentric Reducer
330 Incoloy Eccentric Reducer
330 Incoloy Eccentric Reducer
Incoloy UNS N08330 Eccentric Reducer
Alloy WERKSTOFF NR. 1.4886 Eccentric Reducer
ASTM B366 330 Incoloy Eccentric Reducer

Request
Callback


Additional Information:

  • Item Code: FITTINGS330
  • Production Capacity: 85000
  • Delivery Time: 2 DAYS
  • Packaging Details: We focus on every procedure to assure quality, the package we usually take is pack Stainless Steel 321H Round Bar with environmental poly bags, and then in free fumigation wooden cases or wooden palte. Also can accept customized package such as OEM by negotiation. We offers just about everything to meet your 321H SS Round Bar pack requirements. Lot of emphasis is placed on the packing and packaging. The product are packed in wooden corrugated boxes foiled in plastic wraps and bubble wraps. HEUBACH INTERNATIONAL is focusing on to complete requirements and to deliver perfectly suitable solutions to our clients. We pack these product in suitable packing material to protect Bars form any damage in transport. By choosing the fastest way of shipping, we ensure the on-time delivery of orders. We are offering these Bars with convenient doorstep service, proper packing, fast shipping, and at reasonable rates. We are here to provide excellence in minimum time and standards. While packaging we attach some documents and reports along with supply made products that show the quality of our offered range of products. The packaging of this product is done by big bundles with the individual wrapping of plastic film which protects from contaminations.
Yes! I am Interested

Incoloy 925 Butt Weld Fittings

Incoloy 925 Butt Weld Fittings
  • Incoloy 925 Butt Weld Fittings
  • Incoloy 925 Butt Weld Fittings
  • Incoloy 925 Butt Weld Fittings
  • Incoloy 925 Butt Weld Fittings
  • Incoloy 925 Butt Weld Fittings
  • Incoloy 925 Butt Weld Fittings
  • Incoloy 925 Butt Weld Fittings
  • Incoloy 925 Butt Weld Fittings
  • Incoloy 925 Butt Weld Fittings
  • Incoloy 925 Butt Weld Fittings
Get Best Quote
Approx. Price: Rs 3,650 / NumberGet Latest Price
Product Brochure

Product Details:

Minimum Order Quantity3650 Number
Material GradeIncoloy 925 Buttweld Fittings
MaterialIncoloy 925 Buttweld Fittings
Size1/2 INCH TO 50 INCH
Usage/Application- Off-Shore Oil Drilling Companies - Power Generation - Petrochemicals - Gas Processing - Specialty
BrandIncoloy 925 Buttweld Fittings
DesignIncoloy 925 Buttweld Fittings

HEUBACH INTERNATIONAL offers a wide range of Incoloy 925 Butt Weld Pipe Fittings, which are made under the team of skilled professionals. Composition of Incoloy 925 Elbow Pipe Fittings (UNS N09925) offers a high level of strength and corrosion resistance. Incoloy 925 Long Radius Elbow Pipe Fittings combines the high strength of a precipitation – hardenable alloy with the excellent corrosion resistance of alloy 825. These Incoloy 925 Concentric Reducer has outstanding resistance to general corrosion, pitting, crevice corrosion, and stress – corrosion cracking in many aqueous environments including those containing sulfides and chlorides. Machinable and weldable, Incoloy 925 Equal Tee can be hot and cold worked. On the other hand, copper and molybdenum in Incoloy 925 Cross Pipe Fittings are added to increase its resistance to corrosive media. Meanwhile, these Incoloy 925 Bends Pipe Fittings are also being offered in different sizes and shapes to our customers. With the additions of molybdenum, copper, titanium and aluminum, Incoloy 925 Short Stub Bend Pipe Fittings is an age hardenable nickel – iron – chromium alloy, providing a combination of high strength and excellent corrosion resistance. During heat treatment in Incoloy 925 End Pipe Cap, a strengthening reaction is caused by the addition of titanium and aluminum. These Incoloy 925 Short Radius Elbow Fittings has excellent resistance to pitting and crevice corrosion, which can be age – hardened by adding aluminum and titanium.

Incoloy 925 Pipe Fittings Chemical Composition

Grade

C

Mn

Si

S

Cu

Fe

Ni

Cr

Al

Ti

925

0.03 max

1.00 max

0.05 max

0.03 max

1.50 – 3.00

22.00 min

42.00 – 46.00

19.55 – 22.50

0.01-0.05 max

 

Incoloy 925 Buttweld Fittings Mechanical Properties

Element

Density

Melting Point

Tensile Strength

Yield Strength (0.2%Offset)

Elongation

825

8.14 g/cm3

1400 °C (2550 °F)

Psi – 80,000 , MPa – 550

Psi – 32,000 , MPa – 220

30 %

 

Equivalent Grades for 925 Incoloy Pipe Fitting

STANDARD

WERKSTOFF NR.

UNS

JIS

Incoloy 925

N09925

NCF 925


Incoloy Alloy 925 Buttweld Pipe Fittings Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment       
  • Chemical Equipment          
  • Sea Water Equipment         
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry
Request
Callback


Additional Information:

  • Item Code: FITTINGS925
  • Production Capacity: 85000
  • Delivery Time: 2 DAYS
  • Packaging Details: We focus on every procedure to assure quality, the package we usually take is pack Stainless Steel 321H Round Bar with environmental poly bags, and then in free fumigation wooden cases or wooden palte. Also can accept customized package such as OEM by negotiation. We offers just about everything to meet your 321H SS Round Bar pack requirements. Lot of emphasis is placed on the packing and packaging. The product are packed in wooden corrugated boxes foiled in plastic wraps and bubble wraps. HEUBACH INTERNATIONAL is focusing on to complete requirements and to deliver perfectly suitable solutions to our clients. We pack these product in suitable packing material to protect Bars form any damage in transport. By choosing the fastest way of shipping, we ensure the on-time delivery of orders. We are offering these Bars with convenient doorstep service, proper packing, fast shipping, and at reasonable rates. We are here to provide excellence in minimum time and standards. While packaging we attach some documents and reports along with supply made products that show the quality of our offered range of products. The packaging of this product is done by big bundles with the individual wrapping of plastic film which protects from contaminations.
Yes! I am Interested

Incoloy 825 Butt Weld Fittings

Incoloy 825 Butt Weld Fittings
  • Incoloy 825 Butt Weld Fittings
  • Incoloy 825 Butt Weld Fittings
  • Incoloy 825 Butt Weld Fittings
  • Incoloy 825 Butt Weld Fittings
  • Incoloy 825 Butt Weld Fittings
  • Incoloy 825 Butt Weld Fittings
  • Incoloy 825 Butt Weld Fittings
  • Incoloy 825 Butt Weld Fittings
  • Incoloy 825 Butt Weld Fittings
  • Incoloy 825 Butt Weld Fittings
  • Incoloy 825 Butt Weld Fittings
Get Best Quote
Approx. Price: Rs 3,250 / NumberGet Latest Price
Product Brochure

Product Details:

Minimum Order Quantity3250 Number
Material GradeIncoloy 825 Buttweld Fittings
MaterialIncoloy 825 Buttweld Fittings
Size1/2 INCH TO 50 INCH
Usage/Application- Off-Shore Oil Drilling Companies - Power Generation - Petrochemicals - Gas Processing - Specialty
BrandIncoloy 825 Buttweld Fittings
DesignIncoloy 825 Buttweld Fittings

HEUBACH INTERNATIONAL offers a wide range of Incoloy 825 Butt Weld Pipe Fittings, which is highly demanded for its durability and sturdiness. Incoloy 825 Elbow Pipe Fittings has good resistance in neutral chloride media, stress – corrosion cracking and satisfactory resistance to pitting and crevice corrosion. Incoloy 825 Long Radius Elbow Pipe Fittings does work-harden during machining and has higher strength and “gumminess” not typical of steels. Incoloy 825 Short Radius Elbow Pipe Fittings has good mechanical properties from moderately to high temperatures. Incoloy 825 Concentric Reducer Pipe Fittings has high nickel content, sufficient to resist chloride ion stress corrosion cracking, and a very stable austenite structure. Meanwhile, these Incoloy 825 Eccentric Reducer are also being offered in different sizes and shapes to our customers. Incoloy 825 Equal Tee Pipe Fittings, in conjunction with the molybdenum and copper, gives superb resistance to reducing environments such as those containing sulfuric and phosphoric acids. Typical applications of Incoloy 825 Unequal Tee Pipe Fittings are: phosphoric acid evaporators; pickling – tank heater, pickling equipment and hooks; etc. Incoloy 825 Lateral Tee Pipe Fittings is also used for chemical processing, pollution – control equipment, nuclear fuel reprocessing, oil and gas well piping, acid production, and more. Incoloy 825 Short Stub Bend Pipe Fittings exhibits outstanding performance in both acids and alkalis in oxidizing as well as reducing environments.

Incoloy 825 Pipe Fittings Specifications

Specifications

:

ASTM B366 / ASME SB366

Size

:

Seamless Butt Weld Fittings: 1/2″ – 10″, Welded Butt Weld Fittings: 1/2″ – 48″

Standards

:

ASME/ANSI B16.9, ASME B16.28, MSS-SP-43

Thickness

:

5s, 10s, 40s, 80s, 10, 20, 40, STD, 60, 80, XS, 100, 120, 140, 160, XXS available with NACE MR 01-75

Type

:

Seamless / Welded / Fabricated

 Types of Incoloy 825 Buttweld Fittings

Incoloy 825 45 Degree Elbow

Incoloy 825 45 Degree Elbow
825 Incoloy 90 Degree Elbow
825 Incoloy 45 Degree Elbow
Incoloy UNS N08825 45 Degree Elbow
Incoloy WERKSTOFF NR. 2.4858 45 Degree Elbow
ASME SB366 825 90 Degree Elbow

Incoloy 825 Pipe Fittings

Incoloy 825 Pipe Fittings
825 Incoloy Buttweld Fitting
825 Incoloy Pipe Fitting
Incoloy UNS N08825 Buttweld Fitting
Incoloy WERKSTOFF NR. 2.4858 Pipe Fittings
ASTM B366 825 Incoloy Buttweld Fitting

Incoloy 825 Eccentric Reducer

Alloy 825 Eccentric Reducer
825 Incoloy Eccentric Reducer
825 Incoloy Eccentric Reducer
Incoloy UNS N08825 Eccentric Reducer
Alloy WERKSTOFF NR.2.4858 Eccentric Reducer
ASTM B366 825 Incoloy Eccentric Reducer

Request
Callback


Additional Information:

  • Item Code: FITTINGS825
  • Production Capacity: 95000
  • Delivery Time: 2 DAYS
  • Packaging Details: We focus on every procedure to assure quality, the package we usually take is pack Stainless Steel 321H Round Bar with environmental poly bags, and then in free fumigation wooden cases or wooden palte. Also can accept customized package such as OEM by negotiation. We offers just about everything to meet your 321H SS Round Bar pack requirements. Lot of emphasis is placed on the packing and packaging. The product are packed in wooden corrugated boxes foiled in plastic wraps and bubble wraps. HEUBACH INTERNATIONAL is focusing on to complete requirements and to deliver perfectly suitable solutions to our clients. We pack these product in suitable packing material to protect Bars form any damage in transport. By choosing the fastest way of shipping, we ensure the on-time delivery of orders. We are offering these Bars with convenient doorstep service, proper packing, fast shipping, and at reasonable rates. We are here to provide excellence in minimum time and standards. While packaging we attach some documents and reports along with supply made products that show the quality of our offered range of products. The packaging of this product is done by big bundles with the individual wrapping of plastic film which protects from contaminations.
Yes! I am Interested

Incoloy 800/800HT Butt Weld Fittings

Incoloy 800/800HT Butt Weld Fittings
  • Incoloy 800/800HT Butt Weld Fittings
  • Incoloy 800/800HT Butt Weld Fittings
  • Incoloy 800/800HT Butt Weld Fittings
  • Incoloy 800/800HT Butt Weld Fittings
  • Incoloy 800/800HT Butt Weld Fittings
  • Incoloy 800/800HT Butt Weld Fittings
  • Incoloy 800/800HT Butt Weld Fittings
  • Incoloy 800/800HT Butt Weld Fittings
  • Incoloy 800/800HT Butt Weld Fittings
  • Incoloy 800/800HT Butt Weld Fittings
Get Best Quote
Approx. Price: Rs 2,800 / NumberGet Latest Price
Product Brochure

Product Details:

Minimum Order Quantity2800 Number
Material GradeIncoloy 800/800HT Buttweld Fittings
MaterialIncoloy 800/800HT Buttweld Fittings
Size1/2 INCH TO 50 INCH
Usage/Application- Off-Shore Oil Drilling Companies - Power Generation - Petrochemicals - Gas Processing - Specialty
BrandIncoloy 800/800HT Buttweld Fittings
DesignIncoloy 800/800HT Buttweld Fittings

HEUBACH INTERNATIONAL offers a wide quality range of Incoloy 800 / 800H / 800HT Butt Weld Pipe Fittings, which are manufactured by using optimum quality metals and alloys. Incoloy 800 90Degree Elbow Pipe Fittings (UNS N08800) was the first of these alloys and it was slightly modified into Incoloy 800H. On the other hand, Incoloy 800H 45Degree Elbow Pipe Fittings (UNS N08810) is in fact an iron-nickel-chromium alloy having the same basic composition as Incoloy 800, with significantly higher creep rupture strength. Applications of Incoloy 800HT Long Radius Elbow (UNS N08811) have extended from petrochemical processing reformer tubing, to bellows and flare tips in refinery service. Incoloy 800 Short Radius Elbow Pipe Fittings has further modifications to the combined titanium and aluminum levels to ensure optimum high temperature properties. Incoloy 800H Concentric Reducer Pipe Fittings is an iron – nickel – chromium alloy with moderate strength and good resistance to oxidation and carburization at elevated temperatures. Incoloy 800HT Eccentric Reducer monitors and maintains the ultimate chemical properties for high – temperature strength and resistance to oxidation, carburization and other types of high – temperature corrosion. Incoloy 800 Pipe End Cap is a combination of nickel and chromium alloy that has excellent tensile strength and resistance to oxidation as well as carburization properties. Meanwhile, these Incoloy 800H Unequal Pipe Fittings are also being offered in different sizes and shapes to our customers.

Incoloy 800 / 800H /800HT Pipe Fittings Specifications

Specifications

:

ASTM B366 / ASME SB366

Size

:

Seamless Butt Weld Fittings: 1/2″ – 10″, Welded Butt Weld Fittings: 1/2″ – 48″

Standards

:

ASME/ANSI B16.9, ASME B16.28, MSS-SP-43

Thickness

:

5s, 10s, 40s, 80s, 10, 20, 40, STD, 60, 80, XS, 100, 120, 140, 160, XXS available with NACE MR 01-75

Type

:

Seamless / Welded / Fabricated

800/800HT/825 Incoloy ASTM B366 Buttweld Fittings Equivalent Grades

STANDARD

WERKSTOFF NR.

UNS

JIS

BS

GOST

AFNOR

EN

OR

Incoloy 800

1.4876

N08800

NCF 800

NA 15

????670

Z8NC32-21

X10NiCrAlTi32-20

XH32T

Incoloy 800HT

1.4859 / 1.4876

N08811

NCF 800HT

NA 15(HT)

????670

-

X8NiCrAlTi32-21

XH32T

Request
Callback


Additional Information:

  • Item Code: FITTINGS800
  • Production Capacity: 90000
  • Delivery Time: 2 DAYS
  • Packaging Details: We focus on every procedure to assure quality, the package we usually take is pack Stainless Steel 321H Round Bar with environmental poly bags, and then in free fumigation wooden cases or wooden palte. Also can accept customized package such as OEM by negotiation. We offers just about everything to meet your 321H SS Round Bar pack requirements. Lot of emphasis is placed on the packing and packaging. The product are packed in wooden corrugated boxes foiled in plastic wraps and bubble wraps. HEUBACH INTERNATIONAL is focusing on to complete requirements and to deliver perfectly suitable solutions to our clients. We pack these product in suitable packing material to protect Bars form any damage in transport. By choosing the fastest way of shipping, we ensure the on-time delivery of orders. We are offering these Bars with convenient doorstep service, proper packing, fast shipping, and at reasonable rates. We are here to provide excellence in minimum time and standards. While packaging we attach some documents and reports along with supply made products that show the quality of our offered range of products. The packaging of this product is done by big bundles with the individual wrapping of plastic film which protects from contaminations.
Yes! I am Interested

Hastelloy X Butt Weld Fittings

Hastelloy X Butt Weld Fittings
  • Hastelloy X Butt Weld Fittings
  • Hastelloy X Butt Weld Fittings
  • Hastelloy X Butt Weld Fittings
  • Hastelloy X Butt Weld Fittings
  • Hastelloy X Butt Weld Fittings
  • Hastelloy X Butt Weld Fittings
  • Hastelloy X Butt Weld Fittings
  • Hastelloy X Butt Weld Fittings
  • Hastelloy X Butt Weld Fittings
  • Hastelloy X Butt Weld Fittings
Get Best Quote
Approx. Price: Rs 3,125 / NumberGet Latest Price
Product Brochure

Product Details:

Minimum Order Quantity3125 Number
Material GradeHastelloy X Buttweld Fittings
MaterialHastelloy X Buttweld Fittings
Size1/2 INCH TO 50 INCH
Usage/Application- Off-Shore Oil Drilling Companies - Power Generation - Petrochemicals - Gas Processing - Specialty
BrandHastelloy X Buttweld Fittings
DesignHastelloy X Buttweld Fittings

HEUBACH INTERNATIONAL offers Hastelloy Alloy X Butt Weld Pipe Fittings in a wide range, which is engineered with precision by our skilled professionals who make sure to use premium stainless steel in the manufacturing process. Hastelloy X Reducer Pipe Fittings (UNS N06002) is a nickel – chromium – iron – molybdenum super – alloy with outstanding high temperature strength, oxidation resistance, and fabricability. Hastelloy X Bend Pipe Fittings has also been found to be exceptionally resistant to stress-corrosion cracking in petrochemical applications. Hastelloy X Elbow Pipe Fittings is recommended especially for use in furnace applications because it has unusual resistance to oxidizing, reducing, and neutral atmospheres. Hastelloy X Tee Pipe Fittings exhibits good formability, weldability, and machinability. Meanwhile, these Hastelloy X Cross Pipe Fittings are also being offered in customized sizes and shapes to our customers. Pre – heating of Hastelloy X Stub End is not required, except for very heavy section thickness welds or heavily constrained welds. Post – heating of Hastelloy X End Cap Pipe Fittings is not required but a stress relief anneal, after welding of thick sections or greater, is desirable. However, Hastelloy X Dish Cap Pipe Fittings may be used in the as welded condition, which further can be welded together to achieve longer lengths. The superior combination of ductility and fracture toughness makes Hastelloy X End Pipe Cap a great choice for high operating pressures.

Hastelloy X Pipe Fittings Specifications

Specifications

:

ASTM B366 / ASME SB366

Size

:

Seamless Butt Weld Fittings: 1/2″ – 10″, Welded Butt Weld Fittings: 1/2″ – 48″

Standards

:

ASME/ANSI B16.9, ASME B16.28, MSS-SP-43

Thickness

:

5s, 10s, 40s, 80s, 10, 20, 40, STD, 60, 80, XS, 100, 120, 140, 160, XXS available with NACE MR 01-75

Type

:

Seamless / Welded / Fabricated

 

Types of Hastelloy X Buttweld Fittings

Hastelloy X 45 Degree Elbow

Hastelloy X 45 Degree Elbow
X Hastelloy 90 Degree Elbow
X Hastelloy 45 Degree Elbow
HastelloyUNS N06002 45 Degree Elbow
Hastelloy WERKSTOFF NR. 2.4665 45 Degree Elbow
ASME SB366 X 90 Degree Elbow

Hastelloy X Pipe Fittings

Hastelloy X Pipe Fittings
X Hastelloy Buttweld Fitting
X Hastelloy Pipe Fitting
Hastelloy UNS N06002 Buttweld Fitting
Hastelloy WERKSTOFF NR. 2.4665 Pipe Fittings
ASTM B366 X Hastelloy Buttweld Fitting

Hastelloy X Eccentric Reducer

Alloy X Eccentric Reducer
X Hastelloy Eccentric Reducer
X Hastelloy Eccentric Reducer
Hastelloy UNS N06002 Eccentric Reducer
Alloy WERKSTOFF NR. 2.4665 Eccentric Reducer
ASTM B366 X Hastelloy Eccentric Reducer

Request
Callback


Additional Information:

  • Item Code: FittingsX
  • Production Capacity: 95000
  • Delivery Time: 2 DAYS
  • Packaging Details: We focus on every procedure to assure quality, the package we usually take is pack Hastelloy X Buttweld Fittings with environmental poly bags, and then in free fumigation wooden cases or wooden palte. Also can accept customized package such as OEM by negotiation. We offers just about everything to meet your Hastelloy X Buttweld Fittings pack requirements. Lot of emphasis is placed on the packing and packaging. The product are packed in wooden corrugated boxes foiled in plastic wraps and bubble wraps. HEUBACH INTERNATIONAL is focusing on to complete requirements and to deliver perfectly suitable solutions to our clients. We pack these product in suitable packing material to protect Bars form any damage in transport. By choosing the fastest way of shipping, we ensure the on-time delivery of orders. We are offering these Bars with convenient doorstep service, proper packing, fast shipping, and at reasonable rates. We are here to provide excellence in minimum time and standards. While packaging we attach some documents and reports along with supply made products that show the quality of our offered range of products. The packaging of this product is done by big bundles with the individual wrapping of plastic film which protects from contaminations.
Yes! I am Interested

Hastelloy C276 Butt Weld Fittings

Hastelloy C276 Butt Weld Fittings
  • Hastelloy C276 Butt Weld Fittings
  • Hastelloy C276 Butt Weld Fittings
  • Hastelloy C276 Butt Weld Fittings
  • Hastelloy C276 Butt Weld Fittings
  • Hastelloy C276 Butt Weld Fittings
  • Hastelloy C276 Butt Weld Fittings
  • Hastelloy C276 Butt Weld Fittings
  • Hastelloy C276 Butt Weld Fittings
  • Hastelloy C276 Butt Weld Fittings
  • Hastelloy C276 Butt Weld Fittings
Get Best Quote
Approx. Price: Rs 2,750 / NumberGet Latest Price
Product Brochure

Product Details:

Minimum Order Quantity2750 Number
Material GradeHastelloy C276 Buttweld Fittings
MaterialHastelloy C276 Buttweld Fittings
Size1/2 INCH TO 50 INCH
Usage/Application- Off-Shore Oil Drilling Companies - Power Generation - Petrochemicals - Gas Processing - Specialty
BrandHastelloy C276 Buttweld Fittings
DesignHastelloy C276 Buttweld Fittings

HEUBACH INTERNATIONAL has gained expertise in manufacturing, supplying and trading a quality range of Hastelloy Alloy C276 Butt Weld Pipe Fittings to the esteemed clients. Hastelloy C276 Elbow Butt Weld Pipe Fittings (UNS N10276) is a nickel – molybdenum – chromium super – alloy with an addition of tungsten designed to have excellent corrosion resistance in a wide range of severe environments. HEUBACH INTERNATIONAL is one of the well – known trader and dealer of Hastelloy C276 Tee Butt Weld Pipe Fittings, which is used in chemical process equipment and desulfurization of flue gas equipment. Hastelloy C276 Cross Butt Weld Pipe Fittings has excellent corrosion resistance in a wide range of corrosive media including, sulphur compounds and chloride ions. Hastelloy C276 Pipe Reducer is resistant to the formation of grain boundary precipitates in the weld heat – affected zone, thus making it suitable for most chemical process applications in an as welded condition. Meanwhile, these Hastelloy C276 Pipe Bend are also being offered in customized sizes and shapes to our customers.

Hastelloy C276 Pipe Fittings Specifications

Specifications

:

ASTM B366 / ASME SB366

Size

:

Seamless Butt Weld Fittings: 1/2″ – 10″, Welded Butt Weld Fittings: 1/2″ – 48″

Standards

:

ASME/ANSI B16.9, ASME B16.28, MSS-SP-43

Thickness

:

5s, 10s, 40s, 80s, 10, 20, 40, STD, 60, 80, XS, 100, 120, 140, 160, XXS available with NACE MR 01-75

Type

:

Seamless / Welded / Fabricated

 

Types of Hastelloy C276 Buttweld Fittings

Hastelloy C276 45 Degree Elbow

Hastelloy C276 45 Degree Elbow
C276 Hastelloy 90 Degree Elbow
C276 Hastelloy 45 Degree Elbow
HastelloyUNS N10276 45 Degree Elbow
Hastelloy WERKSTOFF NR. 2.4819 45 Degree Elbow
ASME SB366 C276 90 Degree Elbow

Hastelloy C276 Pipe Fittings

Hastelloy C276 Pipe Fittings
C276 Hastelloy Buttweld Fitting
C276 Hastelloy Pipe Fitting
Hastelloy UNS N10276 Buttweld Fitting
Hastelloy WERKSTOFF NR. 2.4819 Pipe Fittings
ASTM B366 c276 Hastelloy Buttweld Fitting

Hastelloy C276 Pipe Fittings Chemical Composition

Hastelloy C276

Ni

C

Mo

Mn

Si

Fe

P

S

Co

Cr

Balance

0.01 max

15 – 17

1.0 max

0.08 max

4 – 7

0.04 max

0.03 max

2.5 max

14.5 – 16.5

Request
Callback


Additional Information:

  • Item Code: FittingsC276
  • Production Capacity: 80000
  • Delivery Time: 2 DAYS
  • Packaging Details: We focus on every procedure to assure quality, the package we usually take is pack Hastelloy C276 Buttweld Fittings with environmental poly bags, and then in free fumigation wooden cases or wooden palte. Also can accept customized package such as OEM by negotiation. We offers just about everything to meet your Hastelloy C276 Buttweld Fittings pack requirements. Lot of emphasis is placed on the packing and packaging. The product are packed in wooden corrugated boxes foiled in plastic wraps and bubble wraps. HEUBACH INTERNATIONAL is focusing on to complete requirements and to deliver perfectly suitable solutions to our clients. We pack these product in suitable packing material to protect Bars form any damage in transport. By choosing the fastest way of shipping, we ensure the on-time delivery of orders. We are offering these Bars with convenient doorstep service, proper packing, fast shipping, and at reasonable rates. We are here to provide excellence in minimum time and standards. While packaging we attach some documents and reports along with supply made products that show the quality of our offered range of products. The packaging of this product is done by big bundles with the individual wrapping of plastic film which protects from contaminations.
Yes! I am Interested

Hastelloy C22 Butt Weld Fittings

Hastelloy C22 Butt Weld Fittings
  • Hastelloy C22 Butt Weld Fittings
  • Hastelloy C22 Butt Weld Fittings
  • Hastelloy C22 Butt Weld Fittings
  • Hastelloy C22 Butt Weld Fittings
  • Hastelloy C22 Butt Weld Fittings
  • Hastelloy C22 Butt Weld Fittings
  • Hastelloy C22 Butt Weld Fittings
  • Hastelloy C22 Butt Weld Fittings
  • Hastelloy C22 Butt Weld Fittings
  • Hastelloy C22 Butt Weld Fittings
Get Best Quote
Approx. Price: Rs 2,400 / NumberGet Latest Price
Product Brochure

Product Details:

Minimum Order Quantity2400 Number
Material GradeHastelloy C22 Buttweld Fittings
MaterialHastelloy C22 Buttweld Fittings
Size1/2 INCH TO 50 INCH
Usage/Application- Off-Shore Oil Drilling Companies - Power Generation - Petrochemicals - Gas Processing - Specialty
BrandHastelloy C22 Buttweld Fittings
DesignHastelloy C22 Buttweld Fittings

HEUBACH INTERNATIONAL offers a broad spectrum of Hastelloy Alloy C22 Butt Weld Pipe Fittings to the esteemed clients, which has some excellent features to offer such as precise dimensions, excellent finishing, optimum material strength and more. Hastelloy C22 Elbow Pipe Fittings (UNS N06022) is extremely resistant to corrosion in oxidizing and reducing environments. The high chromium content in Hastelloy C22 Tee Pipe Fittings provides good resistance to oxidizing media. The molybdenum and tungsten content in Hastelloy C22 Cross Pipe Fittings gives good resistance to reducing media. Hastelloy C22 Reducer also withstands sulphuric, acetic, formic and phosphoric acids and other non – oxidizing media. Meanwhile, these Hastelloy C22 Bend Pipe Fittings are also being offered in customized sizes and shapes to our customers, where we also offer the same at market leading rates. Hastelloy C22 Stub End should not be used in service temperatures above 1250 Degree F due to the formation of detrimental phases which form above this temperature. Hastelloy C22 End Cap Pipe Fittings is a versatile austenitic nickel – chromium – molybdenum – tungsten alloy with enhanced resistance to pitting, crevice corrosion and stress corrosion cracking. Although ductile enough to be formed by cold working, intermediate annealing of Hastelloy C22 End Pipe Cap may be necessary due to work hardening. Forging in Hastelloy C22 Lateral Tee Pipe Fittings should be performed between the ranges of 1750 Degree F – 2050 Degree F, followed by rapid cooling.

C22 Hastelloy ASTM B366 Buttweld Fittings Equivalent Grades

STANDARD

UNS

WNR.

EN

JIS

GOST

OR

Hastelloy C22

N06022

2.4602

NiCr21Mo14W

NW 6022

-

-

Chemical Composition of Hastelloy C22 Seamless and Welded Pipe Fittings

Grade

Ni

C

Mo

Mn

Si

Fe

P

S

Co

Cr

W

V

Hastelloy C22

Balance

0.010 max

12.5-14.5

0.50 max

0.08 max

2-6

0.02 max

0.02 max

2.5 max

20-22.5

2.5-3.5

0.35 max

Our Hastelloy Butt weld Pipe Fittings are used in a wide range of applications and various industries. Below are a few of them:

·         Petrochemical Industry

·         Oil and Gas Industry

·         Chemical Industry

·         Power Plant Industry            

·         Energy Industry           

Request
Callback


Additional Information:

  • Item Code: FittingsC22
  • Production Capacity: 85000
  • Delivery Time: 2 DAYS
  • Packaging Details: We focus on every procedure to assure quality, the package we usually take is pack Hastelloy C22 Buttweld Fittings with environmental poly bags, and then in free fumigation wooden cases or wooden palte. Also can accept customized package such as OEM by negotiation. We offers just about everything to meet your Hastelloy C22 Buttweld Fittings pack requirements. Lot of emphasis is placed on the packing and packaging. The product are packed in wooden corrugated boxes foiled in plastic wraps and bubble wraps. HEUBACH INTERNATIONAL is focusing on to complete requirements and to deliver perfectly suitable solutions to our clients. We pack these product in suitable packing material to protect Bars form any damage in transport. By choosing the fastest way of shipping, we ensure the on-time delivery of orders. We are offering these Bars with convenient doorstep service, proper packing, fast shipping, and at reasonable rates. We are here to provide excellence in minimum time and standards. While packaging we attach some documents and reports along with supply made products that show the quality of our offered range of products. The packaging of this product is done by big bundles with the individual wrapping of plastic film which protects from contaminations.
Yes! I am Interested

Monel 400/K500 Butt Weld Fittings

Monel 400/K500 Butt Weld Fittings
  • Monel 400/K500 Butt Weld Fittings
  • Monel 400/K500 Butt Weld Fittings
  • Monel 400/K500 Butt Weld Fittings
  • Monel 400/K500 Butt Weld Fittings
  • Monel 400/K500 Butt Weld Fittings
  • Monel 400/K500 Butt Weld Fittings
  • Monel 400/K500 Butt Weld Fittings
  • Monel 400/K500 Butt Weld Fittings
  • Monel 400/K500 Butt Weld Fittings
  • Monel 400/K500 Butt Weld Fittings
Get Best Quote
Approx. Price: Rs 160 / NumberGet Latest Price
Product Brochure

Product Details:

Minimum Order Quantity1680 Number
Material GradeMonel 400/K500 Buttweld Fittings
MaterialMonel 400/K500 Buttweld Fittings
Size1/2 INCH TO 50 INCH
Usage/Application- Off-Shore Oil Drilling Companies - Power Generation - Petrochemicals - Gas Processing - Specialty
BrandMonel 400/K500 Buttweld Fittings
Corrosion ResistantMonel 400/K500 Buttweld Fittings

HEUBACH INTERNATIONAL offers a wide range of Monel Alloy 400/K500 Butt Weld Pipe Fittings, which are made to perfection using high quality steel by our sedulous professionals who possess rich knowledge in this domain. In fact, Monel 400 Tee Pipe Fittings is a nickel – copper alloy that is resistant to sea water and steam at high temperatures as well as to salt and caustic solutions. Monel 400/K500 Pipe Elbow works in a wide range of temperatures, and is available in multiple forms for a variety of products. Meanwhile, these Monel 400/K500 Reducer are also being offered in different sizes and shapes to our customers. Our Monel 400 Cross Pipe Fittings is a nickel copper alloy with good strength and excellent corrosion resistance in a range of media especially sea water, hydrofluoric acid, sulfuric acid, and alkalis. Monel 400 Bend Pipe Fittings is a solid – solution alloy that can be hardened only by cold working, where nickel and copper form a solid solution in all compositions. These Monel 400/K500 Stub End can be fabricated readily by hot – and cold – working, machining, and welding. Thus, Monel 400 End Cap Pipe Fittings can only be hardened by further rolling.

400/K500 Monel ASTM B366 Buttweld Fittings Equivalent Grades

STANDARD

UNS

WNR.

EN

JIS

GOST

AFNOR

BS

Monel 400

N04400

2.4360

NiCu30Fe

NW 4400

?????????? 28-2,5-1,5

NU-30M

NA 13

Monel K500

N05500

2.4375

-

-

-

-

-

Chemical Composition of Monel 400/K500 Seamless and Welded Pipe Fittings

Grade

Ni

Fe

C

Mn

Si

Cu

Al

Ti

S

Monel 400

63.0- 70.00 max

2.50 max

0.3 max

2.00 max

0.50 max

Remainder

-

-

0.024 max

Monel K500

63.0 min

05 - 2

0.25 max

1.5 max

0.5 max

27.0 - 33.0

2.3 - 3.15

0.35 - 0.85

0.010 max

Mechanical Properties Of ASME SB366 Monel Buttweld Pipe Fittings

Grade

Tensile (ksi)

.2% Yield (ksi)

Elongation %

Hardness (HRb)

400

75 to 90

25 to 50

60 to 35

60 to 80

K500

Psi – 1,60,000 , MPa – 1100

Psi – 1,15,000 , MPa – 790

20 %

-

Request
Callback


Additional Information:

  • Item Code: FITINGS400
  • Production Capacity: 85000
  • Delivery Time: 2 DAYS
  • Packaging Details: We focus on every procedure to assure quality, the package we usually take is pack Monel 400/K500 Buttweld Fittings with environmental poly bags, and then in free fumigation wooden cases or wooden palte. Also can accept customized package such as OEM by negotiation. We offers just about everything to meet your Monel 400/K500 Buttweld Fittings pack requirements. Lot of emphasis is placed on the packing and packaging. The product are packed in wooden corrugated boxes foiled in plastic wraps and bubble wraps. HEUBACH INTERNATIONAL is focusing on to complete requirements and to deliver perfectly suitable solutions to our clients. We pack these product in suitable packing material to protect Bars form any damage in transport. By choosing the fastest way of shipping, we ensure the on-time delivery of orders. We are offering these Bars with convenient doorstep service, proper packing, fast shipping, and at reasonable rates. We are here to provide excellence in minimum time and standards. While packaging we attach some documents and reports along with supply made products that show the quality of our offered range of products. The packaging of this product is done by big bundles with the individual wrapping of plastic film which protects from contaminations.
Yes! I am Interested

Duplex Steel S31803 / S32205 Butt Weld Pipe Fittings

Duplex Steel S31803 / S32205 Butt Weld Pipe Fittings
  • Duplex Steel S31803 / S32205 Butt Weld Pipe Fittings
  • Duplex Steel S31803 / S32205 Butt Weld Pipe Fittings
  • Duplex Steel S31803 / S32205 Butt Weld Pipe Fittings
  • Duplex Steel S31803 / S32205 Butt Weld Pipe Fittings
  • Duplex Steel S31803 / S32205 Butt Weld Pipe Fittings
  • Duplex Steel S31803 / S32205 Butt Weld Pipe Fittings
  • Duplex Steel S31803 / S32205 Butt Weld Pipe Fittings
  • Duplex Steel S31803 / S32205 Butt Weld Pipe Fittings
  • Duplex Steel S31803 / S32205 Butt Weld Pipe Fittings
Get Best Quote
Approx. Price: Rs 940 / NumberGet Latest Price
Product Brochure

Product Details:

Minimum Order Quantity940 Number
UNS NumberDuplex Steel S31803 / S32205 Butt Weld Pipe Fittings
Size1/2 INCH TO 50 INCH
BrandDuplex Steel S31803 / S32205 Butt Weld Pipe Fittings
MaterialDuplex Steel S31803 / S32205 Butt Weld Pipe Fittings
Steel GradeDuplex Steel S31803 / S32205 Butt Weld Pipe Fittings
StandardDuplex Steel S31803 / S32205 Butt Weld Pipe Fittings
Usage/Application- Off-Shore Oil Drilling Companies - Power Generation - Petrochemicals - Gas Processing - Specialty
TypeDuplex Steel S31803 / S32205 Butt Weld Pipe Fittings

HEUBACH INTERNATIONAL offers a wide range of Duplex Steel S31803 / S32205 Butt Weld Pipe Fittings, which is manufactured at par with the international quality standards making use of high-grade steel. Duplex Steel S31803 Elbow Butt Weld Pipe Fittings is stainless steel is a stainless steel whose design enables combining improved resistance to pitting, high strength, stress corrosion, crevice corrosion and cracking. Duplex Steel S32205 Tee Butt Weld Pipe Fittings is often used in Chemical Process Industry: such as in Sulphuric Acid Production, Nitric Acid Processes, Phosphoric Acid Processes, Ethylene oxide, Polypropylene Production, PVC, Equipment Handling Organic and Fatty Acids, Chemical Storage and Tankers, Heat Exchangers, etc. Duplex Steel S31803 Reducer Pipe Fittings resists chloride environments and sulphide stress corrosion. Meanwhile, these Duplex Steel S32205 Cross Pipe Fittings are also being offered in different sizes and shapes to our customers. Duplex Steel S31803 Bend Butt Weld Pipe Fittings will often perform well in environments which cause premature failure of austenitic grades. Although Duplex Steel S32205 Stub End Butt Weld Pipe Fittings has good high temperature oxidation resistance, this grade – like other duplex stainless steels – suffers from embrittlement if held for even short times at temperatures above 300 Degree C. If embrittled.        

S31803/S32205 Duplex Steel ASTM A815 Buttweld Fittings Equivalent Grades

STANDARD

UNS

WNR.

Duplex Steel 2205

S31803 / S32205

1.4462

Chemical Composition of Duplex Steel Seamless and Welded Pipe Fittings

Grade

Common Name

C%

Mn%

Si%

P%

S%

Cr%

Ni%

Mo%

N%

2205

S31803

0.030

2.00

1.00

0.030

0.020

21.0-23.0

4.5-6.5

2.5-3.5

0.08-0.20

S32205

0.030

2.00

1.00

0.030

0.020

22.0-23.0

4.5-6.5

3.0-3.5

0.14-0.20

Mechanical Properties Of ASME SA815 Duplex Steel Buttweld Pipe Fittings

Tensile Strength, ksi

90 min

0.2% Yield Strength, ksi

65 min

Elongation, %

25 min

Hardness [HRC]

293 max

Our Duplex Steel Butt weld Pipe Fittings are used in a wide range of applications and various industries. Below are a few of them:

·         Petrochemical Industry

·         Oil and Gas Industry       

·         Chemical Industry           

·         Power Plant Industry                 

Request
Callback


Additional Information:

  • Item Code: STEELS31803
  • Production Capacity: 90000
  • Delivery Time: 2 DAYS
  • Packaging Details: We focus on every procedure to assure quality, the package we usually take is pack Duplex Steel S31803 / S32205 Butt Weld Pipe Fittings with environmental poly bags, and then in free fumigation wooden cases or wooden palte. Also can accept customized package such as OEM by negotiation. We offers just about everything to meet your Duplex Steel S31803 / S32205 Butt Weld Pipe Fittings pack requirements. Lot of emphasis is placed on the packing and packaging. The product are packed in wooden corrugated boxes foiled in plastic wraps and bubble wraps. HEUBACH INTERNATIONAL is focusing on to complete requirements and to deliver perfectly suitable solutions to our clients. We pack these product in suitable packing material to protect Bars form any damage in transport. By choosing the fastest way of shipping, we ensure the on-time delivery of orders. We are offering these Bars with convenient doorstep service, proper packing, fast shipping, and at reasonable rates. We are here to provide excellence in minimum time and standards. While packaging we attach some documents and reports along with supply made products that show the quality of our offered range of products. The packaging of this product is done by big bundles with the individual wrapping of plastic film which protects from contaminations.
Yes! I am Interested

Nickel 200/201 Butt Weld Fittings

Nickel 200/201 Butt Weld Fittings
  • Nickel 200/201 Butt Weld Fittings
  • Nickel 200/201 Butt Weld Fittings
  • Nickel 200/201 Butt Weld Fittings
  • Nickel 200/201 Butt Weld Fittings
  • Nickel 200/201 Butt Weld Fittings
  • Nickel 200/201 Butt Weld Fittings
  • Nickel 200/201 Butt Weld Fittings
  • Nickel 200/201 Butt Weld Fittings
  • Nickel 200/201 Butt Weld Fittings
  • Nickel 200/201 Butt Weld Fittings
Get Best Quote
Approx. Price: Rs 2,200 / NumberGet Latest Price
Product Brochure

Product Details:

Minimum Order Quantity2200 Number
Material GradeNickel 200/201 Buttweld Fittings
MaterialNickel 200/201 Buttweld Fittings
Size1/2 INCH TO 50 INCH
Usage/Application- Off-Shore Oil Drilling Companies - Power Generation - Petrochemicals - Gas Processing - Specialty
BrandNickel 200/201 Buttweld Fittings
DesignNickel 200/201 Buttweld Fittings

HEUBACH INTERNATIONAL offers a wide array of Nickel Alloy 200 Butt Weld Pipe Fittings to the valued customers, which has some excellent features to offer such as lightweight, durable, dimensionally stable, and more. Our Nickel 200 Elbow Butt Weld Pipe Fittings (UNS N02200) are solid solution strengthened, commercially pure wrought materials with good mechanical properties over a wide range of temperatures and excellent resistance to many corrosives, in particular hydroxides. These Nickel 200 Tee Butt Weld Pipe Fittings are commercially pure wrought nickel, and has good mechanical properties and excellent resistance to many corrosive environments. Our Nickel 200 Reducer are often used in Chemical Processing and Storage. Meanwhile, these Nickel 200 Cross Butt Weld Pipe Fittings are also being offered in different sizes and shapes to our customers. Our annealed Nickel 200 Pipe Bend has a low hardness and good ductility and malleability. These attributes, combined with good weldability, make these Nickel 200 Stub End Butt Weld Pipe Fittings highly fabricable. Our Nickel 200 Pipe End Cap has a relatively low work – hardening rate, but it can be cold worked to moderately high strength levels while maintaining ductility. Typically, the elemental restrictions of these Nickel 200 Dish Cap Butt Weld Pipe Fittings and nickel 201 pipe fittings.

Nickel 200 Pipe Fittings Specifications

Specifications

:

ASTM B366 / ASME SB366

Size

:

Seamless Butt Weld Fittings: 1/2″ – 10″, Welded Butt Weld Fittings: 1/2″ – 48″

Standards

:

ASME/ANSI B16.9, ASME B16.28, MSS-SP-43

Thickness

:

5s, 10s, 40s, 80s, 10, 20, 40, STD, 60, 80, XS, 100, 120, 140, 160, XXS available with NACE MR 01-75

Type

:

Seamless / Welded / Fabricated

200/201 Nickel ASTM B366 Buttweld Fittings Equivalent Grades

STANDARD

WERKSTOFF NR.

UNS

JIS

BS

GOST

AFNOR

EN

Nickel 200

2.4066

N02200

NW 2200

NA 11

????-2

N-100M

Ni 99.2

Nickel 201

2.4068

N02201

NW 2201

NA 12

????-2

-

LC-Ni 99

Our Nickel Butt weld Pipe Fittings are used in a wide range of applications and various industries. Below are a few of them:

·         Petrochemical Industry

·         Oil and Gas Industry

Request
Callback


Additional Information:

  • Item Code: FITTINGS200
  • Production Capacity: 80000
  • Delivery Time: 2 DAYS
  • Packaging Details: We focus on every procedure to assure quality, the package we usually take is pack Nickel 200/201 Buttweld Fittings with environmental poly bags, and then in free fumigation wooden cases or wooden palte. Also can accept customized package such as OEM by negotiation. We offers just about everything to meet your Nickel 200/201 Buttweld Fittings pack requirements. Lot of emphasis is placed on the packing and packaging. The product are packed in wooden corrugated boxes foiled in plastic wraps and bubble wraps. HEUBACH INTERNATIONAL is focusing on to complete requirements and to deliver perfectly suitable solutions to our clients. We pack these product in suitable packing material to protect Bars form any damage in transport. By choosing the fastest way of shipping, we ensure the on-time delivery of orders. We are offering these Bars with convenient doorstep service, proper packing, fast shipping, and at reasonable rates. We are here to provide excellence in minimum time and standards. While packaging we attach some documents and reports along with supply made products that show the quality of our offered range of products. The packaging of this product is done by big bundles with the individual wrapping of plastic film which protects from contaminations.
Yes! I am Interested

Super Duplex S32750/S32760 Butt Weld Fittings

Super Duplex S32750/S32760 Butt Weld Fittings
  • Super Duplex S32750/S32760 Butt Weld Fittings
  • Super Duplex S32750/S32760 Butt Weld Fittings
  • Super Duplex S32750/S32760 Butt Weld Fittings
  • Super Duplex S32750/S32760 Butt Weld Fittings
  • Super Duplex S32750/S32760 Butt Weld Fittings
  • Super Duplex S32750/S32760 Butt Weld Fittings
  • Super Duplex S32750/S32760 Butt Weld Fittings
  • Super Duplex S32750/S32760 Butt Weld Fittings
Get Best Quote
Approx. Price: Rs 1,250 / NumberGet Latest Price
Product Brochure

Product Details:

Minimum Order Quantity1250 Number
Material GradeSuper Duplex S32750/S32760 Buttweld Fittings
MaterialSuper Duplex S32750/S32760 Buttweld Fittings
Size1/2 INCH TO 50 INCH
Usage/Application- Off-Shore Oil Drilling Companies - Power Generation - Petrochemicals - Gas Processing - Specialty
BrandSuper Duplex S32750/S32760 Buttweld Fittings
DiameterSuper Duplex S32750/S32760 Buttweld Fittings

HEUBACH INTERNATIONAL offers a wide range of Super Duplex Steel S32750 / S32760 Butt Weld Pipe Fittings, where our quality controllers stringently check the entire range on different parameters to ensure about flawlessness. These Super Duplex S32750 Elbow Pipe Fittings is designed to feature high strength, resistance to pitting, stress corrosion cracking, erosion corrosion and corrosion fatigue, crevice corrosion and strong weldability. Providing higher strength than both austenitic and 22 percent Cr, our Super Duplex S32760 Tee Butt Weld Pipe Fittings is suited to a variety of applications in industries such as Chemical Processing, Oil & Gas, and Marine environments. Meanwhile, these Super Duplex S32760 Cross Pipe Fittings are as well being offered in different sizes and shapes to our customers. We also offer these Super Duplex S32750 Reducer Butt Weld Pipe Fittings at best prices. Solution treatment – heat for these Super Duplex Steel S32750 Stub End Butt Weld Pipe Fittings is up to 1020 Degree C 1100 Degree C and cool rapidly. Our Super Duplex Steel S32760 Bend has higher strength which is around twice that of Type 304 austenitic stainless steel.

Chemical Composition of Super Duplex Steel Seamless and Welded Pipe Fittings

C

Cr

Ni

Mo

N

Others

0.020

25

7

4.0

.27

S=0.001

Super Duplex S32750/ S32760 Pipe Fittings Specifications

Specifications

:

ASTM A815 / ASME SA815

Size

:

Seamless Butt Weld Fittings: 1/2″ – 10″, Welded Butt Weld Fittings: 1/2″ – 48″

Standards

:

ASME/ANSI B16.9, ASME B16.28, MSS-SP-43

Thickness

:

5s, 10s, 40s, 80s, 10, 20, 40, STD, 60, 80, XS, 100, 120, 140, 160, XXS available with NACE MR 01-75

Type

:

Seamless / Welded / Fabricated

 Types of Super Duplex S32750/ S32760 Buttweld Fittings

Super Duplex S32750/ S32760 45 Degree Elbow

Super Duplex S32750/ S32760 45 Degree Elbow
S32750/ S32760 Super Duplex 90 Degree Elbow
S32750/ S32760 Super Duplex 45 Degree Elbow
Super Duplex S32750/ S32760 45 Degree Elbow
Super Duplex WERKSTOFF NR. 1.4410 45 Degree Elbow
ASME SA815 S32750/ S32760 90 Degree Elbow

Super Duplex S32750/ S32760 Pipe Fittings

Super Duplex S32750/ S32760 Pipe Fittings
S32750/ S32760 Super Duplex Buttweld Fitting
S32750/ S32760 Super Duplex Pipe Fitting
Super Duplex UNS S32750/ S32760 Buttweld Fitting
Super Duplex WERKSTOFF NR. 1.4410 Pipe Fittings
ASTM A815 S32750/ S32760 Super Duplex Buttweld Fitting

Request
Callback


Additional Information:

  • Item Code: S32760FITTINGS
  • Production Capacity: 85000
  • Delivery Time: 2 DAYS
  • Packaging Details: We focus on every procedure to assure quality, the package we usually take is pack Super Duplex S32750/S32760 Buttweld Fittings with environmental poly bags, and then in free fumigation wooden cases or wooden palte. Also can accept customized package such as OEM by negotiation. We offers just about everything to meet your Super Duplex S32750/S32760 Buttweld Fittings pack requirements. Lot of emphasis is placed on the packing and packaging. The product are packed in wooden corrugated boxes foiled in plastic wraps and bubble wraps. HEUBACH INTERNATIONAL is focusing on to complete requirements and to deliver perfectly suitable solutions to our clients. We pack these product in suitable packing material to protect Bars form any damage in transport. By choosing the fastest way of shipping, we ensure the on-time delivery of orders. We are offering these Bars with convenient doorstep service, proper packing, fast shipping, and at reasonable rates. We are here to provide excellence in minimum time and standards. While packaging we attach some documents and reports along with supply made products that show the quality of our offered range of products. The packaging of this product is done by big bundles with the individual wrapping of plastic film which protects from contaminations.
Yes! I am Interested

Titanium Grade 7 Fittings

Titanium Grade 7 Fittings
  • Titanium Grade 7 Fittings
  • Titanium Grade 7 Fittings
  • Titanium Grade 7 Fittings
  • Titanium Grade 7 Fittings
  • Titanium Grade 7 Fittings
  • Titanium Grade 7 Fittings
  • Titanium Grade 7 Fittings
  • Titanium Grade 7 Fittings
  • Titanium Grade 7 Fittings
  • Titanium Grade 7 Fittings
  • Titanium Grade 7 Fittings
Get Best Quote
Approx. Price: Rs 2,250 / NumberGet Latest Price
Product Brochure

Product Details:

Minimum Order Quantity2250 Number
GradeTitanium Grade 7 Fittings
Usage/Application- Off-Shore Oil Drilling Companies - Power Generation - Petrochemicals - Gas Processing - Specialty
Size1/2 INCH TO 50 INCH
MaterialTitanium Grade 7 Fittings
BrandTitanium Grade 7 Fittings
Thread SizeTitanium Grade 7 Fittings
Weight1/2 INCH TO 50 INCH

ASTM B381 Ti Alloy Grade 7 High Pressure Forged Fittings Manufactures, Alloy Gr7 Butt weld Fittings, Titanium Gr.7 Butt weld Pipe Fittings, Titanium Grade 7 Forged Fittings, Titanium Alloy Grade 7 Forged Socket weld Fittings, Titanium Gr.7 ASME SB363 Seamless Pipe Fittings Stockist, Titanium Alloy Gr.7 Pipe Fittings Suppliers in Mumbai India.          

HEUBACH INTERNATIONAL supplies and delivers TITANIUM GRADE 7 FITTINGS, which is often used in chemical Processing and production equipment components. Grade 7 Pipe Fittings is identical (0.2 % Pd) except for impurity limits, where Pd is added for corrosion resistance. Thus, for example, TITANIUM GRADE 7 FORGED FITTINGS is resistant to salt water and is suitable for handling chlorides media.             

GRADE 7 FORGED THREADED FITTINGS is the most resistant to corrosion in reducing acids with physical / mechanical properties equivalent to Ti Gr. 2. The most corrosion resistant of all currently available titanium alloys, Forged Socket Weld Fittings is especially well suited to applications requiring resistance to general as well as localized crevice corrosion. 7 Butt Weld Fittings has outstanding corrosion resistance and useful strength at low density, where a small addition of palladium has been made to this alloy for a substantial increase in corrosion resistance. Titanium Butt Weld Pipe Fittings possesses excellent weld ability and farcicality, and is the most corrosion resistance of all titanium alloys. Forged Threaded Fittings is suitability for coiling and laying on seabed, ability to withstand hot/dry and cold/wet acid gas loading, and excellent resistance to corrosive and erosive action of high-temperature acid steam and brine. Grade 7 Titanium Forged Socket Weld Fittings is very effective for improving crevice corrosion at elevated temperatures and where in contact with mildly reducing or variable oxidizing-reducing media.

Titanium Gr.7 Fittings Specification

SPECIFICATIONS : ASTM B363, B381 / ASME SB363, SB381
DIMENSIONS : ASTM, ASME and API
STANDARD : ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799 / ASME/ANSI B16.9, ASME B16.28, MSS-SP-43
SIZE RANGE : 1/8” NB to 4” NB (Socketweld & Screwed-Threaded) / Seamless 1/2" - 10" , Welded 1/2" - 48"               
TYPE : Socketweld Fittings, Screwed-Threaded Fittings / Seamless / Welded / Fabricated /             
FORGED FITTINGS CLASS : 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS
PIPE FITTINGS THICKNESS : SCH 5S , 10S ,10, 20 , 40S , 40 , STD , 60 , 80S , 80 , XS , 100 , 120 , 140 , 160 & XXS.
BENDING RADIUS : R=1D, 2D, 3D, 5D, 6D, 8D, 10D or Custom
GRADE : Gr.7 UNS (R52400 ), DIN (3.7235)



Equivalent Grade

STANDARD

UNS

WNR.

TITANIUM GR 7

R52400

3.7235

Chemical Composition

GRADE

C

N

O

H

TI

FE

TI GR 7

0.10 max

0.03 max

0.25 max

0.015 max

Bal

0.3 max

 

Request
Callback


Additional Information:

  • Item Code: TITANIUMGR7
  • Production Capacity: 90000
  • Delivery Time: 2 DAYS
  • Packaging Details: We focus on every procedure to assure quality, the package we usually take is pack Titanium Grade 7 Fittings with environmental poly bags, and then in free fumigation wooden cases or wooden palte. Also can accept customized package such as OEM by negotiation. We offers just about everything to meet your Titanium Grade 7 Fpack requirements. Lot of emphasis is placed on the packing and packaging. The product are packed in wooden corrugated boxes foiled in plastic wraps and bubble wraps. HEUBACH INTERNATIONAL is focusing on to complete requirements and to deliver perfectly suitable solutions to our clients. We pack these product in suitable packing material to protect Bars form any damage in transport. By choosing the fastest way of shipping, we ensure the on-time delivery of orders. We are offering these Bars with convenient doorstep service, proper packing, fast shipping, and at reasonable rates. We are here to provide excellence in minimum time and standards. While packaging we attach some documents and reports along with supply made products that show the quality of our offered range of products. The packaging of this product is done by big bundles with the individual wrapping of plastic film which protects from contaminations. We focus on every procedure to assure quality, the package we usually take is pack Stainless Steel 321H Round Bar with environmental poly bags, and then in free fumigation wooden cases or wooden palte. Also can accept customized package such as OEM by negotiation. We offers just about everything to meet your 321H SS Round Bar pack requirements. Lot of emphasis is placed on the packing and packaging. The product are packed in wooden corrugated boxes foiled in plastic wraps and bubble wraps. HEUBACH INTERNATIONAL is focusing on to complete requirements and to deliver perfectly suitable solutions to our clients. We pack these product in suitable packing material to protect Bars form any damage in transport. By choosing the fastest way o
Yes! I am Interested

Titanium Gr 5 Butt Weld Fittings

Titanium Gr 5 Butt Weld Fittings
  • Titanium Gr 5 Butt Weld Fittings
  • Titanium Gr 5 Butt Weld Fittings
  • Titanium Gr 5 Butt Weld Fittings
  • Titanium Gr 5 Butt Weld Fittings
  • Titanium Gr 5 Butt Weld Fittings
  • Titanium Gr 5 Butt Weld Fittings
  • Titanium Gr 5 Butt Weld Fittings
  • Titanium Gr 5 Butt Weld Fittings
  • Titanium Gr 5 Butt Weld Fittings
  • Titanium Gr 5 Butt Weld Fittings
Get Best Quote
Approx. Price: Rs 2,050 / NumberGet Latest Price
Product Brochure

Product Details:

Minimum Order Quantity2050 Number
GradeTitanium Gr 5 Buttweld Fittings
Size1/2 INCH TO 50 INCH
Usage/Application- Off-Shore Oil Drilling Companies - Power Generation - Petrochemicals - Gas Processing - Specialty
MaterialTitanium Gr 5 Buttweld Fittings
BrandTitanium Gr 5 Buttweld Fittings
Product TypeTitanium Gr 5 Buttweld Fittings

HEUBACH INTERNATIONAL offers a vast range of Grade 5 Titanium Butt Weld Pipe Fittings, where they are in tandem with international quality standards and are manufactured using high quality material. These Titanium Grade 5 Elbow Butt Weld Pipe Fittings is a fantastic material, which is difficult to work with, but so rewarding when it can be pulled off. Our Titanium Grade 5 Tee Butt Weld Pipe Fittings is high – strength alloy which can be used at cryogenic temperatures up to about 800 Degree F (427 Degree C). Often referred to as the “work horse” grade, these Titanium Grade 5 Cross Butt Weld Pipe Fittings is most commonly found in the annealed condition. Meanwhile, Titanium Grade 5 Reducer are also being offered in different sizes and shapes to our customers. We offer processing services and a fully automated magazine feed rod blanking line for these Titanium Grade 5 Bend Pipe Fittings, where we can process your material to your exact requirements. Titanium Grade 5 Stub End Butt Weld Pipe Fittings has excellent corrosion resistance in oxidising conditions, and is effectively immune.

Titanium Gr 5 Pipe Fittings Specifications

Specifications

:

ASTM B363 / ASME SB363

Size

:

1/2″ to 24″ NB to 24″NB in

Standards

:

ASME/ANSI B16.9, ASME B16.28, MSS-SP-43

Thickness

:

5s, 10s, 40s, 80s, 10, 20, 40, STD, 60, 80, XS, 100, 120, 140, 160, XXS available with NACE MR 01-75

Type

:

Seamless / Welded / Fabricated

Titanium Gr 5 Pipe Fittings Chemical Composition

Titanium Gr 5

C

Ti

N

Fe

H

O

V

Al

0.10 max

90 min

0.05 max

0.40 max

0.015 max

0.20 max

3.5-4.5

5.5-6.75 max

 

Titanium Gr 5 Buttweld Fittings Mechanical Properties

Density

Melting Point

Yield Strength (0.2%Offset)

Tensile Strength

Elongation

4.43 g/cm3

1632 °C (2970 °F)

Psi – 128000 , MPa – 880

Psi – 138000 , MPa – 950

14 %

Material Testing:
We at HEUBACH INTERNATIONAL ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
Request
Callback


Additional Information:

  • Item Code: TITANIUMGR5
  • Production Capacity: 85000
  • Delivery Time: 3 DAYS
  • Packaging Details: We focus on every procedure to assure quality, the package we usually take is pack Titanium Gr 5 Buttweld Fittings with environmental poly bags, and then in free fumigation wooden cases or wooden palte. Also can accept customized package such as OEM by negotiation. We offers just about everything to meet your Titanium Gr 5 Buttweld Fittings pack requirements. Lot of emphasis is placed on the packing and packaging. The product are packed in wooden corrugated boxes foiled in plastic wraps and bubble wraps. HEUBACH INTERNATIONAL is focusing on to complete requirements and to deliver perfectly suitable solutions to our clients. We pack these product in suitable packing material to protect Bars form any damage in transport. By choosing the fastest way of shipping, we ensure the on-time delivery of orders. We are offering these Bars with convenient doorstep service, proper packing, fast shipping, and at reasonable rates. We are here to provide excellence in minimum time and standards. While packaging we attach some documents and reports along with supply made products that show the quality of our offered range of products. The packaging of this product is done by big bundles with the individual wrapping of plastic film which protects from contaminations.
Yes! I am Interested

Titanium Gr 2 Butt Weld Fittings

Titanium Gr 2 Butt Weld Fittings
  • Titanium Gr 2 Butt Weld Fittings
  • Titanium Gr 2 Butt Weld Fittings
  • Titanium Gr 2 Butt Weld Fittings
  • Titanium Gr 2 Butt Weld Fittings
  • Titanium Gr 2 Butt Weld Fittings
  • Titanium Gr 2 Butt Weld Fittings
  • Titanium Gr 2 Butt Weld Fittings
  • Titanium Gr 2 Butt Weld Fittings
  • Titanium Gr 2 Butt Weld Fittings
Get Best Quote
Approx. Price: Rs 1,750 / NumberGet Latest Price
Product Brochure

Product Details:

Minimum Order Quantity1750 Number
GradeTitanium Gr 2 Buttweld Fittings
Size1/2 INCH TO 50 INCH
Usage/Application- Off-Shore Oil Drilling Companies - Power Generation - Petrochemicals - Gas Processing - Specialty
MaterialTitanium Gr 2 Buttweld Fittings
BrandTitanium Gr 2 Buttweld Fittings
Product TypeTitanium Gr 2 Buttweld Fittings

HEUBACH INTERNATIONAL offers a wide range of Titanium Gr 2 Butt Weld Pipe Fittings, which are manufactured keeping in mind the variegated requirements of our esteemed customers. In addition to this, we offer these Titanium grade 2 Pipe Elbow in a spectrum of sizes and dimensions at reasonable rates. We also offer these products in different grades such as Titanium Grade 2 Butt Weld Pipe Reducer and Titanium Grade 5 Butt Weld Pipe Fittings. In addition, these Titanium UNS R50400 Butt Weld Fittings also offer some excellent features such as dimensionally stable, fine finish, high material strength, and more. Meanwhile, these products are also being offered in different sizes and shapes to our customers.

Titanium Gr 2 Pipe Fittings Specifications

Specifications

:

ASTM B363 / ASME SB363

Size

:

1/2″ to 24″ NB to 24″NB in

Standards

:

ASME/ANSI B16.9, ASME B16.28, MSS-SP-43

Thickness

:

5s, 10s, 40s, 80s, 10, 20, 40, STD, 60, 80, XS, 100, 120, 140, 160, XXS available with NACE MR 01-75

Type

:

Seamless / Welded / Fabricated

 

Types of Titanium Gr 2 Buttweld Fittings

Titanium Gr 2 45 Degree Elbow

Titanium Gr 2 45 Degree Elbow
Gr 2 Titanium 90 Degree Elbow
Gr 2 Titanium Alloy 45 Degree Elbow
Titanium Gr 2 45 Degree Elbow
Titanium WERKSTOFF NR. 3.7035 45 Degree Elbow
ASME SB363 Gr 2 90 Degree Elbow

Titanium Gr 2 Pipe Fittings

Titanium Gr 2 Pipe Fittings
Gr 2 Titanium Buttweld Fitting
Gr 2 Titanium Alloy Pipe Fitting
Titanium UNS R50400 Buttweld Fitting
Titanium WERKSTOFF NR. 3.7035 Pipe Fittings
ASTM B363 Gr 2 Titanium Buttweld Fitting

Titanium Gr 2 Eccentric Reducer

Alloy Gr 2 Eccentric Reducer
Gr 2 Titanium Eccentric Reducer
Gr 2 Titanium Alloy Eccentric Reducer
Titanium UNS R50400 Eccentric Reducer
Alloy WERKSTOFF NR. 3.7035 Eccentric Reducer
ASTM B363 Gr 2 Titanium Eccentric Reducer

Titanium Gr 2 Pipe Fittings Chemical Composition

Titanium Gr 2

C

Ti

N

Fe

H

O

V

Al

0.1 max

99.2 min

0.03 max

0.3 max

0.015 max

0.25 max

Titanium Alloy Gr 2 Buttweld Pipe Fittings Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemical
Request
Callback


Additional Information:

  • Item Code: TITANIUMGR2
  • Production Capacity: 80000
  • Delivery Time: 2 DAYS
  • Packaging Details: We focus on every procedure to assure quality, the package we usually take is pack Titanium Gr 2 Buttweld Fittings with environmental poly bags, and then in free fumigation wooden cases or wooden palte. Also can accept customized package such as OEM by negotiation. We offers just about everything to meet your Titanium Gr 2 Buttweld Fittings pack requirements. Lot of emphasis is placed on the packing and packaging. The product are packed in wooden corrugated boxes foiled in plastic wraps and bubble wraps. HEUBACH INTERNATIONAL is focusing on to complete requirements and to deliver perfectly suitable solutions to our clients. We pack these product in suitable packing material to protect Bars form any damage in transport. By choosing the fastest way of shipping, we ensure the on-time delivery of orders. We are offering these Bars with convenient doorstep service, proper packing, fast shipping, and at reasonable rates. We are here to provide excellence in minimum time and standards. While packaging we attach some documents and reports along with supply made products that show the quality of our offered range of products. The packaging of this product is done by big bundles with the individual wrapping of plastic film which protects from contaminations.
Yes! I am Interested

Alloy Steel WP22 Buttweld Fittings

Alloy Steel WP22 Buttweld Fittings
  • Alloy Steel WP22 Buttweld Fittings
  • Alloy Steel WP22 Buttweld Fittings
  • Alloy Steel WP22 Buttweld Fittings
  • Alloy Steel WP22 Buttweld Fittings
  • Alloy Steel WP22 Buttweld Fittings
  • Alloy Steel WP22 Buttweld Fittings
  • Alloy Steel WP22 Buttweld Fittings
  • Alloy Steel WP22 Buttweld Fittings
  • Alloy Steel WP22 Buttweld Fittings
  • Alloy Steel WP22 Buttweld Fittings
Get Best Quote
Approx. Price: Rs 750 / NumberGet Latest Price
Product Brochure

Product Details:

Minimum Order Quantity750 Number
Material GradeAlloy Steel WP22 Buttweld Fittings
MaterialAlloy Steel WP22 Buttweld Fittings
Size1/2 INCH TO 50 INCH
Usage/Application- Off-Shore Oil Drilling Companies - Power Generation - Petrochemicals - Gas Processing - Specialty
BrandAlloy Steel WP22 Buttweld Fittings
DesignAlloy Steel WP22 Buttweld Fittings
Country of OriginMade in India

Alloy Steel WP22 Pipe Reducer, Alloy Steel WP22 180 Deg Bend, ASTM A234 Alloy Steel WP22 Long Stub, Alloy Steel 3d Pipe Bend, Alloy Steel WP22 Pipe Fittings, Alloy Steel WP22 Pipe bend Exporter in India.

HEUBACH INTERNATIONAL is a known exporter, trader and manufacturer of Alloy Steel WP22 Pipe Fittings, which are provided in numerous specifications to suit the diverse needs of the customers. Alloy Steel WP22 Elbow Butt Weld Pipe Fittings is the molybdenum bearing version and has the same useful combination of properties. The molybdenum addition in these Alloy Steel WP22 Tee Butt Weld Pipe Fittings improves corrosion resistance. Alloy Steel WP22 Cross Butt Weld Pipe Fittings contains excellent mechanical properties as well as exceptional corrosion resistance to corrosives, specifically hydroxides. Because of high compound fixation, these Alloy Steel WP22 Reducer are broadly utilized as connectors for piping frameworks in the ship building and power generation industry. We offer these Alloy Steel WP22 Stub End which is being processed with the most – advanced technology under the observation of our professionals. Alloy Steel WP22 End Cap Butt Weld Pipe Fittings is stabilized by the addition of columbium and tantalum. These Alloy Steel WP22 Dish Cap Butt Weld Pipe Fittings is also advantageous for high temperature service because of its good mechanical properties. Alloy Steel WP22 Seamless Pipe Fittings has good oxidation resistance and creep strength to 1500 Degree F (816 Degree C). These Alloy Steel WP22 Lateral Tee Butt Weld Pipe Fittings can be used for a wide variety of applications including: control valves, pressure relief valves, and centrifugal pumps.

Alloy Steel WP22 Pipe Fittings Specifications

Specifications

:

ASTM A234 / ASME SA234

Size

:

1/8” NB TO 48” NB. (Seamless & 100% X-Ray Welded, Fabricated)

Standards

:

ASME/ANSI B16.9, ASME B16.28, MSS-SP-43

Thickness

:

Sch 5s, Sch 10s, Sch 40s, Sch 80s, Sch 160s, Sch XXS

Type

:

Seamless / Welded / Fabricated

Alloy Steel WP22 Pipe Fittings Chemical Composition

Grade

C

Mn

Si

S

P

Cr

Mo

A234 WP22

0.05-0.15

0.3-0.6

≤0.5

≤0.04

≤0.04

2-2.5

0.87-1.13

 

Alloy Steel WP22 Butt weld Fittings Mechanical Properties

Grade

Tensile Strength (Mpa)

Yield Strength (Mpa)

Elongation %

A234 WP22

415-585

≥205

≥20

Request
Callback


Additional Information:

  • Item Code: ALLOYWP22
  • Production Capacity: 95000
  • Delivery Time: 2 DAYS
  • Packaging Details: We focus on every procedure to assure quality, the package we usually take is pack Alloy Steel WP22 Buttweld Fittings with environmental poly bags, and then in free fumigation wooden cases or wooden palte. Also can accept customized package such as OEM by negotiation. We offers just about everything to meet your Alloy Steel WP22 Buttweld Fittings pack requirements. Lot of emphasis is placed on the packing and packaging. The product are packed in wooden corrugated boxes foiled in plastic wraps and bubble wraps. HEUBACH INTERNATIONAL is focusing on to complete requirements and to deliver perfectly suitable solutions to our clients. We pack these product in suitable packing material to protect Bars form any damage in transport. By choosing the fastest way of shipping, we ensure the on-time delivery of orders. We are offering these Bars with convenient doorstep service, proper packing, fast shipping, and at reasonable rates. We are here to provide excellence in minimum time and standards. While packaging we attach some documents and reports along with supply made products that show the quality of our offered range of products. The packaging of this product is done by big bundles with the individual wrapping of plastic film which protects from contaminations.
Yes! I am Interested

Alloy Steel WP11 Buttweld Fittings

Alloy Steel WP11 Buttweld Fittings
  • Alloy Steel WP11 Buttweld Fittings
  • Alloy Steel WP11 Buttweld Fittings
  • Alloy Steel WP11 Buttweld Fittings
  • Alloy Steel WP11 Buttweld Fittings
  • Alloy Steel WP11 Buttweld Fittings
  • Alloy Steel WP11 Buttweld Fittings
  • Alloy Steel WP11 Buttweld Fittings
  • Alloy Steel WP11 Buttweld Fittings
  • Alloy Steel WP11 Buttweld Fittings
Get Best Quote
Approx. Price: Rs 480 / NumberGet Latest Price
Product Brochure

Product Details:

Minimum Order Quantity480 Number
Material GradeAlloy Steel WP11 Buttweld Fittings
MaterialAlloy Steel WP11 Buttweld Fittings
Size1/2 INCH TO 50 INCH
Usage/Application- Off-Shore Oil Drilling Companies - Power Generation - Petrochemicals - Gas Processing - Specialty
BrandAlloy Steel WP11 Buttweld Fittings
DesignAlloy Steel WP11 Buttweld Fittings
Country of OriginMade in India

HEUBACH INTERNATIONAL is a known trader, exporter and manufacturer of Alloy Steel WP11 Pipe Fittings, which is the free – machining version of this grade, available in bar form for use in automatic screw machines. These attributes, combined with good weldability, make Alloy Steel WP11 Elbow Butt Weld Pipe Fittings highly fabricable. We have achieved huge appreciation in the market as major manufacturer and supplier of Alloy Steel WP11 Tee Butt Weld Pipe Fittings. We are a leading manufacturer and supplier of Alloy Steel WP11 Cross Butt Weld Pipe Fittings made of nitrogen which ensures the resistance power against corrosion and heat while providing high tensile strength. Other alloying elements in Alloy Steel WP11 Reducer are added to enhance their structure and properties such as formability, strength and cryogenic toughness. Alloy Steel WP11 Stub End Butt Weld Pipe Fittings may perhaps be welded using shielded fusion and resistance methods, but oxyacetylene welding should not be used due to the danger of carbon pickup in the weld. Alloy Steel WP11 Pipe End Cap are available at very reasonable price to our clients, which is being used in various industrial purposes these pipes are available in different sizes and shapes.           

Alloy Steel WP11 Pipe Fittings Specifications

Specifications

:

ASTM A234 / ASME SA234

Size

:

1/8” NB TO 48” NB. (Seamless & 100% X-Ray Welded, Fabricated)

Standards

:

ASME/ANSI B16.9, ASME B16.28, MSS-SP-43

Thickness

:

Sch 5s, Sch 10s, Sch 40s, Sch 80s, Sch 160s, Sch XXS

Type

:

Seamless / Welded / Fabricated

 Alloy Steel WP11 Buttweld Pipe Fittings Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing

Types of Alloy Steel WP11 Buttweld Fittings

Alloy Steel  WP11 45 Degree Elbow

Alloy Steel WP11 45 Degree Elbow
Alloy Steel WP11 Buttweld 45 Deg. Elbow
WP11 Alloy Steel 45 Degree Elbow
Chrome Moly WP11 45 Degree Elbow
Alloy Steel WP11 45 Degree Elbow
ASME A234 Alloy Steel WP11 90 Degree Elbow

Alloy Steel WP11 Pipe Fittings

Alloy Steel WP11 Pipe Fittings
Chrome Moly WP11 Buttweld Fitting
WP11 Alloy Steel Pipe Fitting
Alloy Steel  WP11 Buttweld Fitting
Alloy Steel WP11 Pipe Fittings
ASTM A234 Alloy Steel WP11 45 Buttweld Fitting

Alloy Steel WP11 Eccentric Reducer

Alloy Steel WP11 Eccentric Reducer
WP11 Alloy Steel Eccentric Reducer
Chrome Moly WP11  Eccentric Reducer
Alloy Steel  WP11 Eccentric Reducer
Alloy Steel WP11 Eccentric Reducer
ASTM A234  Alloy Steel WP11 Eccentric Reducer

Request
Callback


Additional Information:

  • Item Code: ALLOYWP11
  • Production Capacity: 75000
  • Delivery Time: 2 DAYS
  • Packaging Details: We focus on every procedure to assure quality, the package we usually take is pack Alloy Steel WP11 Buttweld Fittings with environmental poly bags, and then in free fumigation wooden cases or wooden palte. Also can accept customized package such as OEM by negotiation. We offers just about everything to meet your Alloy Steel WP11 Buttweld Fittings pack requirements. Lot of emphasis is placed on the packing and packaging. The product are packed in wooden corrugated boxes foiled in plastic wraps and bubble wraps. HEUBACH INTERNATIONAL is focusing on to complete requirements and to deliver perfectly suitable solutions to our clients. We pack these product in suitable packing material to protect Bars form any damage in transport. By choosing the fastest way of shipping, we ensure the on-time delivery of orders. We are offering these Bars with convenient doorstep service, proper packing, fast shipping, and at reasonable rates. We are here to provide excellence in minimum time and standards. While packaging we attach some documents and reports along with supply made products that show the quality of our offered range of products. The packaging of this product is done by big bundles with the individual wrapping of plastic film which protects from contaminations.
Yes! I am Interested

Alloy Steel WP1/WP5/WP9 Butt Weld Fittings

Alloy Steel WP1/WP5/WP9 Butt Weld Fittings
  • Alloy Steel WP1/WP5/WP9 Butt Weld Fittings
  • Alloy Steel WP1/WP5/WP9 Butt Weld Fittings
  • Alloy Steel WP1/WP5/WP9 Butt Weld Fittings
  • Alloy Steel WP1/WP5/WP9 Butt Weld Fittings
  • Alloy Steel WP1/WP5/WP9 Butt Weld Fittings
  • Alloy Steel WP1/WP5/WP9 Butt Weld Fittings
  • Alloy Steel WP1/WP5/WP9 Butt Weld Fittings
  • Alloy Steel WP1/WP5/WP9 Butt Weld Fittings
  • Alloy Steel WP1/WP5/WP9 Butt Weld Fittings
  • Alloy Steel WP1/WP5/WP9 Butt Weld Fittings
  • Alloy Steel WP1/WP5/WP9 Butt Weld Fittings
Get Best Quote
Approx. Price: Rs 430 / NumberGet Latest Price
Product Brochure

Product Details:

Minimum Order Quantity430 Number
Material GradeAlloy Steel WP1/WP5/WP9 Buttweld Fittings
MaterialAlloy Steel WP1/WP5/WP9 Buttweld Fittings
Size1/2 INCH TO 50 INCH
Usage/Application- Off-Shore Oil Drilling Companies - Power Generation - Petrochemicals - Gas Processing - Specialty
BrandAlloy Steel WP1/WP5/WP9 Buttweld Fittings
DesignAlloy Steel WP1/WP5/WP9 Buttweld Fittings
Country of OriginMade in India

HEUBACH INTERNATIONAL is a known manufacturer, exporter and trader of Alloy Steel WP1 Pipe Fittings, which appears to fall between both the stainless and nickel categories as it contains characteristics of both. An advantage of Alloy Steel WP1 Pipe Elbow is that it can be precipitation hardened and strengthened by heat treatments. Alloy Steel WP1 Tee Butt Weld Pipe Fittings has bright annealed or bright annealed and cold rolled grease, where ultra – bright finishes is used for decorative applications. Applications of Alloy Steel WP1 Reducer are limited to a maximum temperature of 1000 Degree F per ASME. The high – temperature strength of Alloy Steel WP1 Cross Butt Weld Pipe Fittings is basically the same in the range of 950 Degree C to 1150 Degree C. There is no risk of inter – crystalline corrosion on cooling or welding in Alloy Steel WP1 Stub End due to the low carbon content. The maximum service temperature of Alloy Steel WP1 End Cap Butt Weld Pipe Fittings is at 450 Degree C.              

Alloy Steel WP1 Pipe Fittings Chemical Composition

C, %

Mn, %

P, %

S, %

Si, %

Mo, %

0.28 max

0.30- 0.90

0.045 max

0.045 max>

0.10- 0.50

0.044-0.65 max

Grade

C

Mn

Si

S

P

Cr

Mo

A234 WP5

≤0.15

≤0.6

≤0.5

≤0.04

≤0.03

4-6

0.44-0.65

Grade

C

Mn

Si

S

P

Cr

Mo

A234 WP9

≤0.15

≤0.6

1.00

≤0.03

≤0.03

8-10

0.99-1.10

 

Alloy Steel WP1 Buttweld Fittings Mechanical Properties

Tensile Strength , MPa

Yield Strength, MPa

Elongation, %

Hardness, HB

220 min

415 min

20 min

121-174

Grade

Tensile Strength (Mpa)

Yield Strength (Mpa)

Elongation %

A234 WP5

415 – 585

≥205

≥20

Grade

Tensile Strength (Mpa)

Yield Strength (Mpa)

Elongation %

A234 WP9

380 min

585 min

≥30

Request
Callback


Additional Information:

  • Item Code: ALLOYWP1
  • Production Capacity: 85000
  • Delivery Time: 3 DAYS
  • Packaging Details: We focus on every procedure to assure quality, the package we usually take is pack Alloy Steel WP1/WP5/WP9 Buttweld Fittings with environmental poly bags, and then in free fumigation wooden cases or wooden palte. Also can accept customized package such as OEM by negotiation. We offers just about everything to meet your Alloy Steel WP1/WP5/WP9 Buttweld Fittings pack requirements. Lot of emphasis is placed on the packing and packaging. The product are packed in wooden corrugated boxes foiled in plastic wraps and bubble wraps. HEUBACH INTERNATIONAL is focusing on to complete requirements and to deliver perfectly suitable solutions to our clients. We pack these product in suitable packing material to protect Bars form any damage in transport. By choosing the fastest way of shipping, we ensure the on-time delivery of orders. We are offering these Bars with convenient doorstep service, proper packing, fast shipping, and at reasonable rates. We are here to provide excellence in minimum time and standards. While packaging we attach some documents and reports along with supply made products that show the quality of our offered range of products. The packaging of this product is done by big bundles with the individual wrapping of plastic film which protects from contaminations.
Yes! I am Interested

Alloy Steel WP91 Buttweld Fittings

Alloy Steel WP91 Buttweld Fittings
  • Alloy Steel WP91 Buttweld Fittings
  • Alloy Steel WP91 Buttweld Fittings
  • Alloy Steel WP91 Buttweld Fittings
  • Alloy Steel WP91 Buttweld Fittings
  • Alloy Steel WP91 Buttweld Fittings
  • Alloy Steel WP91 Buttweld Fittings
  • Alloy Steel WP91 Buttweld Fittings
  • Alloy Steel WP91 Buttweld Fittings
  • Alloy Steel WP91 Buttweld Fittings
Get Best Quote
Approx. Price: Rs 930 / NumberGet Latest Price
Product Brochure

Product Details:

Minimum Order Quantity930 Number
Material GradeAlloy Steel WP91 Buttweld Fittings
MaterialAlloy Steel WP91 Buttweld Fittings
Size1/2 INCH TO 50 INCH
Usage/Application- Off-Shore Oil Drilling Companies - Power Generation - Petrochemicals - Gas Processing - Specialty
BrandAlloy Steel WP91 Buttweld Fittings
DesignAlloy Steel WP91 Buttweld Fittings
Country of OriginMade in India

HEUBACH INTERNATIONAL is a known exporter, manufacturer and trader of Alloy Steel WP91 Pipe Fittings, which is essentially non – magnetic in the annealed condition and can only be hardened by cold working. Alloy Steel WP91 Elbow Butt Weld Pipe Fittings should be used in heavier sections to reduce the occurrence of carbide precipitation in the heat affected region adjacent to the weld pool. Alloy Steel WP91 Tee Butt Weld Pipe Fittings exhibit high resistance to sulphite liquors and are useful for handling nitric acid, nitric – sulphuric acid mixtures, and acetic, citric, and lactic acids. Because of its excellent heat and corrosion resistant properties, along with its ductility, Alloy Steel WP91 Cross Butt Weld Pipe Fittings is used in countless applications, because it costs less than the chrome – nickel grades. Alloy Steel WP91 Reducer Butt Weld Pipe Fittings is used primarily for stainless and decorative purposes including household appliances, metal moulding, metal trim, cabinet hardware, hinges, drawn and formed parts and stampings.              

Alloy Steel WP91 Pipe Fittings Specifications                  

Specifications

:

ASTM A234 / ASME SA234

Size

:

1/8” NB TO 48” NB. (Seamless & 100% X-Ray Welded, Fabricated)

Standards

:

ASME/ANSI B16.9, ASME B16.28, MSS-SP-43

Thickness

:

Sch 5s, Sch 10s, Sch 40s, Sch 80s, Sch 160s, Sch XXS

Type

:

Seamless / Welded / Fabricated

Types of Alloy Steel WP91 Buttweld Fittings

Alloy Steel WP91 45 Degree Elbow

Alloy Steel WP91 45 Degree Elbow
Alloy Steel WP91 Buttweld 45 Deg. Elbow
WP91 Alloy Steel 45 Degree Elbow
Chrome Moly WP91 45 Degree Elbow
Alloy Steel WP91 45 Degree Elbow
ASME A234 Alloy Steel WP91 90 Degree Elbow

Alloy Steel WP91 Pipe Fittings

Alloy Steel WP91 Pipe Fittings
Chrome Moly WP91 Buttweld Fitting
WP91 Alloy Steel Pipe Fitting
Alloy Steel  WP91 Buttweld Fitting
Alloy Steel WP91 Pipe Fittings
ASTM A234 Alloy Steel WP91 45 Buttweld Fitting

Alloy Steel WP91 Eccentric Reducer

Alloy Steel WP91 Eccentric Reducer
WP91 Alloy Steel Eccentric Reducer
Chrome Moly WP91 Eccentric Reducer
Alloy Steel  WP91 Eccentric Reducer
Alloy Steel WP91 Eccentric Reducer
ASTM A234  Alloy Steel WP91 Eccentric Reducer

Alloy Steel WP91 Concentric Reducer

Alloy Steel WP91 Concentric Reducer
WP91 Alloy Concentric Reducer
Chrome Moly WP91 Concentric Reducer
Alloy Steel WP91 Concentric Reducer
Alloy Steel WP91 Concentric Reducer
ANSI B16.9 Alloy Steel WP91 Concentric Reducer

Request
Callback


Additional Information:

  • Production Capacity: 70000
  • Delivery Time: 2 DAYS
  • Packaging Details: We focus on every procedure to assure quality, the package we usually take is pack Alloy Steel WP91 Buttweld Fittings with environmental poly bags, and then in free fumigation wooden cases or wooden palte. Also can accept customized package such as OEM by negotiation. We offers just about everything to meet yourAlloy Steel WP91 Buttweld Fittings pack requirements. Lot of emphasis is placed on the packing and packaging. The product are packed in wooden corrugated boxes foiled in plastic wraps and bubble wraps. HEUBACH INTERNATIONAL is focusing on to complete requirements and to deliver perfectly suitable solutions to our clients. We pack these product in suitable packing material to protect Bars form any damage in transport. By choosing the fastest way of shipping, we ensure the on-time delivery of orders. We are offering these Bars with convenient doorstep service, proper packing, fast shipping, and at reasonable rates. We are here to provide excellence in minimum time and standards. While packaging we attach some documents and reports along with supply made products that show the quality of our offered range of products. The packaging of this product is done by big bundles with the individual wrapping of plastic film which protects from contaminations.
Yes! I am Interested

Inconel 718 Threaded Forged Fittings

Inconel 718 Threaded Forged Fittings
  • Inconel 718 Threaded Forged Fittings
  • Inconel 718 Threaded Forged Fittings
  • Inconel 718 Threaded Forged Fittings
  • Inconel 718 Threaded Forged Fittings
  • Inconel 718 Threaded Forged Fittings
  • Inconel 718 Threaded Forged Fittings
  • Inconel 718 Threaded Forged Fittings
  • Inconel 718 Threaded Forged Fittings
  • Inconel 718 Threaded Forged Fittings
  • Inconel 718 Threaded Forged Fittings
Get Best Quote
Approx. Price: Rs 8,400 / NumberGet Latest Price
Product Brochure

Product Details:

Minimum Order Quantity8400 Number
Size1/2 inch o 50 inch
MaterialInconel 718 Threaded Forged Fittings
Usage/Application- Off-Shore Oil Drilling Companies - Power Generation - Petrochemicals - Gas Processing - Specialty
Surface FinishInconel 718 Threaded Forged Fittings
BrandInconel 718 Threaded Forged Fittings
Connection TypeInconel 718 Threaded Forged Fittings
Country of OriginMade in India

HEUBACH INTERNATIONAL offers a wide range of Inconel 718 Forged Threaded Fittings to the clients, which are tested for its quality before being introduced in the market. Inconel 718 Forged Threaded Elbow (UNS N07718) also exhibits excellent tensile and impact strength. Inconel 718 Forged Threaded Tee has better mechanical properties at lower temperatures than Nimonic 90 Forged Fittings and Inconel X – 750 Forged Threaded Fittings. Inconel 718 Forged Threaded Cross has been used for jet engine and high – speed airframe parts such as wheels, buckets, spacers, and high temperature bolts and fasteners. Inconel 718 Forged Threaded Cap is also used in gas turbines, rocket motors, spacecraft, nuclear reactors, pumps, and tooling. Inconel 718 Forged Threaded Fittings has excellent weldability compared to the nickel – base super alloys hardened by Aluminum and Titanium. Meanwhile, these Inconel 718 Forged Threaded Coupling are also being offered in different sizes and shapes to our customers. Inconel 718 Forged Threaded Union has excellent strength from -423 degrees F to 1300 degrees F (-253 degrees C to 705 degrees C). These Inconel 718 Forged Threaded Bushing combines corrosion resistance and high strength with outstanding weldability, including resistance to post – weld cracking. To reap the best costs and performance benefits from metal additive layer manufacturing, aerospace applications focus on complex components made of high-value materials such as Inconel 718 Forged Threaded Plug.

Inconel 718 Forged Threaded Fittings Chemical Composition

Grade

C

Mn

Si

S

Cu

Fe

Ni

Cr

Inconel 718

0.08 max

0.35 max

0.35 max

0.015max

0.30 max

50.00 – 55.00

17.00 – 21.00

Inconel 718 Threaded Fitting Mechanical Properties

Element

Density

Melting Point

Tensile Strength

Yield Strength (0.2%Offset)

Elongation

Inconel 718

8.2 g/cm3

1350 °C (2460 °F)

Psi – 1,35,000 , MPa – 930

Psi – 75,000 , MPa – 482

45 %

Equivalent Grades for 718 Inconel Forged Threaded Fittings

STANDARD

WERKSTOFF NR.

UNS

JIS

BS

GOST

AFNOR

EN

Inconel 718

2.4668

N07718

 

Inconel 718 Forged Threaded Fittings Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry
Request
Callback


Additional Information:

  • Production Capacity: 70000
  • Delivery Time: 2 DAYS
  • Packaging Details: We focus on every procedure to assure quality, the package we usually take is pack Inconel 718 Threaded Forged Fittings with environmental poly bags, and then in free fumigation wooden cases or wooden palte. Also can accept customized package such as OEM by negotiation. We offers just about everything to meet your Inconel 718 Threaded Forged Fittings pack requirements. Lot of emphasis is placed on the packing and packaging. The product are packed in wooden corrugated boxes foiled in plastic wraps and bubble wraps. HEUBACH INTERNATIONAL is focusing on to complete requirements and to deliver perfectly suitable solutions to our clients. We pack these product in suitable packing material to protect Bars form any damage in transport. By choosing the fastest way of shipping, we ensure the on-time delivery of orders. We are offering these Bars with convenient doorstep service, proper packing, fast shipping, and at reasonable rates. We are here to provide excellence in minimum time and standards. While packaging we attach some documents and reports along with supply made products that show the quality of our offered range of products. The packaging of this product is done by big bundles with the individual wrapping of plastic film which protects from contaminations.
Yes! I am Interested

Inconel 600/601/625 Forged Fittings

Inconel 600/601/625 Forged Fittings
  • Inconel 600/601/625 Forged Fittings
  • Inconel 600/601/625 Forged Fittings
  • Inconel 600/601/625 Forged Fittings
  • Inconel 600/601/625 Forged Fittings
  • Inconel 600/601/625 Forged Fittings
  • Inconel 600/601/625 Forged Fittings
  • Inconel 600/601/625 Forged Fittings
  • Inconel 600/601/625 Forged Fittings
  • Inconel 600/601/625 Forged Fittings
Get Best Quote
Approx. Price: Rs 5,500 / NumberGet Latest Price
Product Brochure

Product Details:

Minimum Order Quantity5500 Number
BrandInconel 600/601/625 Forged Fittings
Size1/2 inch o 50 inch
MaterialInconel 600/601/625 Forged Fittings
Usage/Application- Off-Shore Oil Drilling Companies - Power Generation - Petrochemicals - Gas Processing - Specialty
Material GradeInconel 600/601/625 Forged Fittings
ShapeInconel 600/601/625 Forged Fittings
Country of OriginMade in India

HEUBACH INTERNATIONAL is a leading manufacturer and supplier of the Inconel 600/601/625 Forged Fittings  and industrial steel which is compromised of ferrous and nonferrous steel. We even design the customized form of the fittings as per the customer dimensions and specifications. Our all the fittings are well tested and examined before the delivery to the clients. 

Inconel 600/601/625/718 Forged Fittings is made with the various types of the specification such as tolerance, conditions, types, grade, standards, pressure, shape, size, width, length, thickness, surface, and finish as well. These specifications help the fitting to perform better in hostile environments. These fittings are also designed with several chemical compositions like manganese, sulfur, silicon, Iron, nickel, chromium, copper, carbon, and molybdenum. 
Inconel 600/601/625 Forged Fittings is applicable in many of the general works and industries such as offshore oil drilling industries, pharmaceutical industry, chemical equipment, gas processing, electrical equipment, military components, food processing, water supply transportation, paper industry, fertilizer industry, heat exchanger, condensers, pharmaceutical equipment, sweater equipment, shafts, pumps, home appliances, petrochemical industry, and power generation industry as well.

Inconel 600 Threaded Fittings Specifications

Specifications

:

ASTM B564 & ASME B564

Size

:

1/8” NB to 4” NB  

Standards

:

ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799

Class

:

2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS

Type

:

Threaded Fittings

 

Types of Inconel 600 Threaded Forged Fittings

 

Inconel 600 Threaded Elbow

Inconel Alloy 600 45 Threaded Elbow
600 Inconel 90 Degree Forged Threaded Elbow
Inconel 600  45 Degree Forged Threaded Elbow
Inconel  UNS N06600 45 Degree Forged Threaded Elbow
Inconel  WERKSTOFF NR. 2.4816 45 Degree Threaded Elbow
ASME B564 Inconel 90 Degree Forged Threaded

Inconel 600 Threaded Tee

Inconel 600 Threaded Tee
Alloy 600 Forged Threaded Tee
600 Inconel Forged Threaded Tee
Inconel UNS N06600 Threaded Tee
Inconel WERKSTOFF NR. 2.4816 Threaded Tee
ASTM B564 Inconel Threaded Tee

Inconel 600 Threaded Coupling

Inconel Alloy 600 Threaded Coupling
600 Inconel Forged Threaded Coupling
Inconel 600 Threaded Coupling
Inconel UNS N06600 Forged Threaded Coupling
Inconel WERKSTOFF NR. 2.4816 Threaded Coupling
ASTM B564 600 Inconel Threaded Coupling

Inconel 600 Threaded Cross

Inconel 600 Threaded Cross
600 Inconel Forged Threaded Cross
Alloy 600 Threaded Cross
Inconel UNS N06600 Forged Threaded Cross
Inconel WERKSTOFF NR. 2.4816 Threaded Cross
ASME B564 600 Inconel Forged Threaded Cross

 

Request
Callback


Additional Information:

  • Production Capacity: 75000
  • Delivery Time: 2 DAYS
  • Packaging Details: We focus on every procedure to assure quality, the package we usually take is pack Inconel 600/601/625 Forged Fittings with environmental poly bags, and then in free fumigation wooden cases or wooden palte. Also can accept customized package such as OEM by negotiation. We offers just about everything to meet your Inconel 600/601/625 Forged Fittings pack requirements. Lot of emphasis is placed on the packing and packaging. The product are packed in wooden corrugated boxes foiled in plastic wraps and bubble wraps. HEUBACH INTERNATIONAL is focusing on to complete requirements and to deliver perfectly suitable solutions to our clients. We pack these product in suitable packing material to protect Bars form any damage in transport. By choosing the fastest way of shipping, we ensure the on-time delivery of orders. We are offering these Bars with convenient doorstep service, proper packing, fast shipping, and at reasonable rates. We are here to provide excellence in minimum time and standards. While packaging we attach some documents and reports along with supply made products that show the quality of our offered range of products. The packaging of this product is done by big bundles with the individual wrapping of plastic film which protects from contaminations.
Yes! I am Interested

Stainless Steel 904L Forged Fittings

Stainless Steel 904L Forged Fittings
  • Stainless Steel 904L Forged Fittings
  • Stainless Steel 904L Forged Fittings
  • Stainless Steel 904L Forged Fittings
  • Stainless Steel 904L Forged Fittings
  • Stainless Steel 904L Forged Fittings
  • Stainless Steel 904L Forged Fittings
  • Stainless Steel 904L Forged Fittings
  • Stainless Steel 904L Forged Fittings
  • Stainless Steel 904L Forged Fittings
  • Stainless Steel 904L Forged Fittings
Get Best Quote
Approx. Price: Rs 3,500 / NumberGet Latest Price
Product Brochure

Product Details:

Minimum Order Quantity3500 Number
BrandStainless Steel 904L Forged Fittings
MaterialStainless Steel 904L Forged Fittings
Usage/Application- Off-Shore Oil Drilling Companies - Power Generation - Petrochemicals - Gas Processing - Specialty
Material GradeStainless Steel 904L Forged Fittings
Size1/2 inch o 50 inch
StandardStainless Steel 904L Forged Fittings
Country of OriginMade in India

HEUBACH INTERNATIONAL is one of the pioneer stockiest and dealer for Stainless Steel 904L Forged Threaded Fittings, which have excellent resistance to warm seawater and chloride attack. The corrosion resistance properties of Stainless Steel 904L Forged Threaded Elbow are not as good as the 18 – 8 chromium – nickel steels and its susceptibility to carbide precipitation during welding restricts its use in many applications. The mechanical properties for the different tempers of Stainless Steel 904L Forged Threaded Tee are obtained by cold working and not by heat treating. Stainless Steel 904L Forged Threaded Cross has a minimum tensile strength and is used in the fabrication of parts that require moderate drawing or forming. Stainless Steel 904L Forged Threaded Cap is a non – stabilized austenitic stainless steel with low carbon content. This high alloy Stainless Steel 904L Forged Threaded Fittings/ is added with copper to improve its resistance to strong reducing acids, such as sulphuric acid. Stainless Steel 904L Forged Threaded Coupling is also resistant to stress corrosion cracking and crevice corrosion. Stainless Steel 904L Forged Threaded Union is non – magnetic, and offers excellent formability, toughness and weldability. Stainless Steel 904L Forged Threaded Bushing contains high amounts of expensive ingredients, such as molybdenum and nickel.

Specifications

:

ASTM A182 & ASME SA182

Size

:

1/8” NB to 4” NB

Standards

:

ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799

Class

:

2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS

Type

:

Threaded Fittings


Chemical Composition of Stainless Steel 904L Forged Fittings


C

Cr

Cu

Mn

Mo

Ni

P

S

Max

 

 

Max

 

 

Max

Max

0.02

19.0-23.0

2.0

4.0-5.0

23.0-28.0

0.045

0.035

1.0

Mechanical Properties Of Stainless Steel 904L Forged Fittings

Grade 

Tensile Strength (MPa) min 

Yield Strength 0.2% Proof (MPa) min 

Elongation (% in 50mm) min 

Hardness 

Rockwell B (HR B) 

Brinell (HB) 

904L

490

220

36

70-90 typical

150

 

Request
Callback


Additional Information:

  • Item Code: FITTINGS904L
  • Production Capacity: 85000
  • Delivery Time: 2 DAYS
  • Packaging Details: We focus on every procedure to assure quality, the package we usually take is pack Stainless Steel 904L Forged Fittings with environmental poly bags, and then in free fumigation wooden cases or wooden palte. Also can accept customized package such as OEM by negotiation. We offers just about everything to meet your Stainless Steel 904L Forged Fittings pack requirements. Lot of emphasis is placed on the packing and packaging. The product are packed in wooden corrugated boxes foiled in plastic wraps and bubble wraps. HEUBACH INTERNATIONAL is focusing on to complete requirements and to deliver perfectly suitable solutions to our clients. We pack these product in suitable packing material to protect Bars form any damage in transport. By choosing the fastest way of shipping, we ensure the on-time delivery of orders. We are offering these Bars with convenient doorstep service, proper packing, fast shipping, and at reasonable rates. We are here to provide excellence in minimum time and standards. While packaging we attach some documents and reports along with supply made products that show the quality of our offered range of products. The packaging of this product is done by big bundles with the individual wrapping of plastic film which protects from contaminations.
Yes! I am Interested

Hastelloy C22 Threaded Forged Fittings

Hastelloy C22 Threaded Forged Fittings
  • Hastelloy C22 Threaded Forged Fittings
  • Hastelloy C22 Threaded Forged Fittings
  • Hastelloy C22 Threaded Forged Fittings
  • Hastelloy C22 Threaded Forged Fittings
  • Hastelloy C22 Threaded Forged Fittings
  • Hastelloy C22 Threaded Forged Fittings
  • Hastelloy C22 Threaded Forged Fittings
  • Hastelloy C22 Threaded Forged Fittings
  • Hastelloy C22 Threaded Forged Fittings
  • Hastelloy C22 Threaded Forged Fittings
Get Best Quote
Approx. Price: Rs 2,900 / NumberGet Latest Price
Product Brochure

Product Details:

Minimum Order Quantity2900 Number
Size1/2 inch o 50 inch
MaterialHastelloy C22 Threaded Forged Fittings
Usage/Application- Off-Shore Oil Drilling Companies - Power Generation - Petrochemicals - Gas Processing - Specialty
Material GradeHastelloy C22 Threaded Forged Fittings
BrandHastelloy C22 Threaded Forged Fittings
StandardHastelloy C22 Threaded Forged Fittings
Country of OriginMade in India

HEUBACH INTERNATIONAL. is known for providing the wide range of the Hastelloy c22 Forged Fittings  We make these forged fittings with the best raw materials to provide the best products to the customer. We always try to give the best services except for the products.

These Hastelloy Forged Fittings are made from Nickel, chromium, an iron alloy which is further added with copper and molybdenum. These fitting are heated between the temperature 1200 degree F and 2250 degree F with temperature control. These fittings have resistance to inter-granular corrosion. It also has stress corrosion cracking resistance as well as resistance to the welded condition. These fittings have excellent resistance to chloride corrosion and also avoid cracking. They also show excellent mechanical properties and fabricability.

All these Hastelloy c22 Forged Fittings are sent for testing before supplying it to the customers. The tests that are done on the fittings are material identification test, mechanical test, hardness test, chemical test and many more. We also allow the third party inspection and 100 % radiography test report.

Hastelloy C22 Threaded Fittings Specifications

Specifications

:

ASTM B564 & ASME B564

Size

:

1/8” NB to 4” NB

Standards

:

ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799

Class

:

2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS

Type

:

Threaded Fittings

Hastelloy C22 Forged Threaded Fittings Chemical Composition

Grade

C

Mn

Si

S

Co

Ni

Cr

Fe

Mo

P

C22

0.010 max

0.50 max

0.08 max

0.02 max

2.50 max

50.015 min*

20.00 – 22.50

2.00 – 6.00

12.50 – 14.50

0.02 max

Hastelloy C22 Threaded Fitting Mechanical Properties

Density

Melting Point

Tensile Strength

Yield Strength (0.2%Offset)

Elongation

8.69 g/cm3

1399 °C (2550 °F)

Psi – 1,00,000 , MPa – 690

Psi – 45000 , MPa – 310

45 %


We at HEUBACH INTERNATIONAL provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Request
Callback


Additional Information:

  • Item Code: HASELLOYC22
  • Production Capacity: 85000
  • Delivery Time: 2 DAYS
  • Packaging Details: We focus on every procedure to assure quality, the package we usually take is pack Hastelloy C22 Threaded Forged Fittings with environmental poly bags, and then in free fumigation wooden cases or wooden palte. Also can accept customized package such as OEM by negotiation. We offers just about everything to meet your Hastelloy C22 Threaded Forged Fittings pack requirements. Lot of emphasis is placed on the packing and packaging. The product are packed in wooden corrugated boxes foiled in plastic wraps and bubble wraps. HEUBACH INTERNATIONAL is focusing on to complete requirements and to deliver perfectly suitable solutions to our clients. We pack these product in suitable packing material to protect Bars form any damage in transport. By choosing the fastest way of shipping, we ensure the on-time delivery of orders. We are offering these Bars with convenient doorstep service, proper packing, fast shipping, and at reasonable rates. We are here to provide excellence in minimum time and standards. While packaging we attach some documents and reports along with supply made products that show the quality of our offered range of products. The packaging of this product is done by big bundles with the individual wrapping of plastic film which protects from contaminations.
Yes! I am Interested

Monel 400/K500 Forged Fittings

Monel 400/K500 Forged Fittings
  • Monel 400/K500 Forged Fittings
  • Monel 400/K500 Forged Fittings
  • Monel 400/K500 Forged Fittings
  • Monel 400/K500 Forged Fittings
  • Monel 400/K500 Forged Fittings
  • Monel 400/K500 Forged Fittings
  • Monel 400/K500 Forged Fittings
  • Monel 400/K500 Forged Fittings
  • Monel 400/K500 Forged Fittings
  • Monel 400/K500 Forged Fittings
  • Monel 400/K500 Forged Fittings
  • Monel 400/K500 Forged Fittings
Get Best Quote
Approx. Price: Rs 5,650 / NumberGet Latest Price
Product Brochure

Product Details:

Minimum Order Quantity5650 Number
BrandBackMonel 400/K500 Forged Fittings
Size1/2 inch o 50 inch
MaterialBackMonel 400/K500 Forged Fittings
Usage/Application- Off-Shore Oil Drilling Companies - Power Generation - Petrochemicals - Gas Processing - Specialty
Material GradeBackMonel 400/K500 Forged Fittings
Thread SizeBackMonel 400/K500 Forged Fittings
Country of OriginMade in India

The company HEUBACH INTERNATIONAL has a widespread group of products through some of the handpicked equipment that aids and helps most of the industry in the productions. Monel 400/K500 Forged Fittings  is the product which is present in ample amount.

There are various sorts of items fabricated utilizing Monel composite one such item is Monel 400/K500 Forged Fittings that are broadly utilized in modern and business applications because of its magnificent exhibition. It is a gathering of nickel amalgams that are made out of nickel and copper with some measure of manganese, iron, silicon, and carbon. The composite is more grounded and is profoundly impervious to erosion by various specialists like seawater. 

Monel 400/K500 Threaded Fittings Specifications

Specifications

:

ASTM B564 & ASME B564

Size

:

1/8” NB to 4” NB

Standards

:

ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799

Class

:

2000 LBS, 3000 LBS, 4000 LBS, 9000 LBS

Type

:

Threaded Fittings

400/K500 Monel Forged Fittings Equivalent Grades

STANDARD

UNS

WNR.

JIS

EN

Monel 400

N04400

2.4360

NW 4400

NiCu30Fe

Monel K500

N05500

2.4375

-

-

Chemical Composition of Monel 400/K500 Forged Fittings

Grade

Ni

Fe

C

Mn

Si

Cu

Al

Ti

S

400

63.0- 70.00 max

2.50 max

0.3 max

2.00 max

0.50 max

Remainder

-

-

0.024 max

K500

63.0 min

05 - 2

0.25 max

1.5 max

0.5 max

27.0 - 33.0

2.3 - 3.15

0.35 - 0.85

0.010 max


Our Monel 400/K500 Forged Fittings are used in a wide range of applications and various industries.

·         Petrochemical Industry

·         Oil and Gas Industry

·         Chemical Industry

·         Power Plant Industry

Request
Callback


Additional Information:

  • Item Code: FITTINGS400
  • Production Capacity: 85000
  • Delivery Time: 2 DAYS
  • Packaging Details: We focus on every procedure to assure quality, the package we usually take is pack Monel 400/K500 Forged Fittings with environmental poly bags, and then in free fumigation wooden cases or wooden palte. Also can accept customized package such as OEM by negotiation. We offers just about everything to meet your Monel 400/K500 Forged Fittings pack requirements. Lot of emphasis is placed on the packing and packaging. The product are packed in wooden corrugated boxes foiled in plastic wraps and bubble wraps. HEUBACH INTERNATIONAL is focusing on to complete requirements and to deliver perfectly suitable solutions to our clients. We pack these product in suitable packing material to protect Bars form any damage in transport. By choosing the fastest way of shipping, we ensure the on-time delivery of orders. We are offering these Bars with convenient doorstep service, proper packing, fast shipping, and at reasonable rates. We are here to provide excellence in minimum time and standards. While packaging we attach some documents and reports along with supply made products that show the quality of our offered range of products. The packaging of this product is done by big bundles with the individual wrapping of plastic film which protects from contaminations.
Yes! I am Interested

Hastelloy X Threaded Forged Fittings

Hastelloy X Threaded Forged Fittings
  • Hastelloy X Threaded Forged Fittings
  • Hastelloy X Threaded Forged Fittings
  • Hastelloy X Threaded Forged Fittings
  • Hastelloy X Threaded Forged Fittings
  • Hastelloy X Threaded Forged Fittings
  • Hastelloy X Threaded Forged Fittings
  • Hastelloy X Threaded Forged Fittings
  • Hastelloy X Threaded Forged Fittings
  • Hastelloy X Threaded Forged Fittings
  • Hastelloy X Threaded Forged Fittings
Get Best Quote
Approx. Price: Rs 4,200 / NumberGet Latest Price
Product Brochure

Product Details:

Size1/2 inch o 50 inch
MaterialHastelloy X Threaded Forged Fittings
Usage/Application- Off-Shore Oil Drilling Companies - Power Generation - Petrochemicals - Gas Processing - Specialty
Surface FinishHastelloy X Threaded Forged Fittings
BrandHastelloy X Threaded Forged Fittings
Connection TypeHastelloy X Threaded Forged Fittings
Country of OriginMade in India

Hastelloy X Threaded Tee, Hastelloy X Threaded Forged Fittings, ASTM B564 Hastelloy X Threaded Elbow, X Hastelloy Threaded Bushing, Hastelloy X Hexagonal Plug, Hastelloy X Threaded Cap Manufacturer and Suppliers In Mumbai, India.

HEUBACH INTERNATIONAL offers Hastelloy Alloy X Forged Threaded Fittings in a wide range, which has some excellent features to offer such as high tensile strength, fine finish standards, abrasion resistant, and more. Although Hastelloy X Forged Threaded Elbow Fittings (UNS N06002) is primarily noted for heat and oxidation resistance, it also has good resistance to chloride stress – corrosion cracking and has good resistance to carburization, excellent resistance to reducing or carburizing atmospheres. Oxidation resistance of Hastelloy X Forged Threaded Tee Fittings is excellent up to 2200 Degree F. Hastelloy X Forged Threaded Cross Fittings has excellent forming and welding characteristics. Hastelloy X Forged Threaded Cap Fittings also has performed well in jet engine tailpipes, afterburner components, cabin heaters, and other aircraft parts. Meanwhile, these Hastelloy X Forged Threaded Bend Fittings are also being offered in customized sizes and shapes to our customers. Typical operating temperatures of Hastelloy X Forged Threaded Coupling Fittings are 500 Degree F to -20 Degree F. Hastelloy X Forged Threaded Union Fittings can be bent up to 180 degrees with a maximum allowable thinning of 10 % and flattening of 8 % depending on tube OD and wall thickness and will maintain their physical properties.

Hastelloy X Threaded Fittings Specifications

Specifications

:

ASTM B564 & ASME B564

Size

:

1/8” NB to 4” NB (Socketweld & Screwed-Threaded)

Standards

:

ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799

Class

:

2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS

Type

:

Threaded Fittings

Types of Hastelloy X Threaded Forged Fittings

Hastelloy X Threaded Elbow

Hastelloy Alloy X 45 Threaded Elbow
X Hastelloy 90 Degree Forged Threaded Elbow
Hastelloy X 45 Degree Forged Threaded Elbow
Hastelloy UNS N06002 45 Degree Forged Threaded Elbow
Hastelloy WERKSTOFF NR. 2.4665 45 Degree Threaded Elbow
ASME B564 Hastelloy X 90 Degree Forged Threaded

Hastelloy X Threaded Tee

Hastelloy X Threaded Tee
Alloy X Forged Threaded Tee
X Hastelloy Forged Threaded Tee
Hastelloy UNS N06002 Threaded Tee
Hastelloy WERKSTOFF NR. 2.4665 Threaded Tee
ASTM B564 X Hastelloy Threaded Tee

Hastelloy X Threaded Coupling

Hastelloy Alloy X Threaded Coupling
X Hastelloy Forged Threaded Coupling
Hastelloy X Threaded Coupling
Hastelloy UNS N06002 Forged Threaded Coupling
Hastelloy WERKSTOFF NR. 2.4665 Threaded Coupling
ASTM B564 X Hastelloy Threaded Coupling

Request
Callback
Yes! I am Interested

Hastelloy B2/B3 Threaded Forged Fittings

Hastelloy B2/B3 Threaded Forged Fittings
  • Hastelloy B2/B3 Threaded Forged Fittings
  • Hastelloy B2/B3 Threaded Forged Fittings
  • Hastelloy B2/B3 Threaded Forged Fittings
  • Hastelloy B2/B3 Threaded Forged Fittings
  • Hastelloy B2/B3 Threaded Forged Fittings
  • Hastelloy B2/B3 Threaded Forged Fittings
  • Hastelloy B2/B3 Threaded Forged Fittings
  • Hastelloy B2/B3 Threaded Forged Fittings
  • Hastelloy B2/B3 Threaded Forged Fittings
  • Hastelloy B2/B3 Threaded Forged Fittings
Get Best Quote
Approx. Price: Rs 3,300 / NumberGet Latest Price
Product Brochure

Product Details:

BrandHastelloy B2/B3 Threaded Forged Fittings
Size1/2 inch o 50 inch
MaterialHastelloy B2/B3 Threaded Forged Fittings
Usage/Application- Off-Shore Oil Drilling Companies - Power Generation - Petrochemicals - Gas Processing - Specialty
Material GradeHastelloy B2/B3 Threaded Forged Fittings
Thread SizeHastelloy B2/B3 Threaded Forged Fittings
Country of OriginMade in India

HEUBACH INTERNATIONAL offers Hastelloy Alloy B2/B3 Forged Threaded Fittings, which are made in cohesion with the universally defined quality standards and norms. Due to the presence of high molybdenum content, our Hastelloy B2/B3 Forged Threaded Elbow Fittings (UNS N10665) is expensive. These Hastelloy B2/B3 Forged Threaded Tee Fittings is one of the most popular nickel steel alloys for a reason. Our Hastelloy B2/B3 Forged Threaded Cross Fittings provides resistance to pure sulfuric acid and a number of non – oxidizing acids. These Hastelloy B2/B3 Forged Threaded Cap Fittings can be used in the as-welded condition because it resists the formation of grain – boundary carbide precipitates in the weld heat – affected zone. Our Hastelloy B2/B3 Forged Threaded Bend Fittings with restricted chemistry can be used in the welded condition and is less susceptible to SCC under many conditions. Meanwhile, our Hastelloy B2/B3 Forged Threaded Coupling Fittings are also being offered in customized sizes and shapes to our customers. These Hastelloy B2/B3 Forged Threaded Union Fittings prevents carburization and sulfidation at the elevated temperatures. Our Hastelloy B2/B3 Forged Threaded Bushing Fittings suitably prevents the development of grain boundary precipitates in the weld heated region and is easily weldable by gas tungsten arc, gas metal arc or shielded metal welding methods.                     

Hastelloy B2/B3 Forged Threaded Fittings Chemical Composition

Grade

C

Mn

Si

S

Co

Ni

Cr

Fe

Mo

P

B2

0.01 max

1.00 max

0.08 max

0.03 max

2.50 max

50.99 min*

14.50 – 16.50

4.00 – 7.00

15.0 – 17.0

0.04 max

Grade

Ni

Mo

Cr

Fe

W

Mn

C

Al

Ti

Si

B3

65.0 min

28.5

1.5

1.5

3.0 max

3.0 max

0.01 max

0.50 max

0.2 max

10 max

 

Hastelloy B2/B3 Threaded Fitting Mechanical Properties

Density

Melting Point

Tensile Strength

Yield Strength (0.2%Offset)

Elongation

8.89 g/cm3

1370 °C (2500 °F)

Psi – 1,15,000 , MPa – 790

Psi – 52000 , MPa – 355

40 %

Density

Melting Point

Tensile Strength

Yield Strength (0.2%Offset)

Elongation

9.2 g/cm3

1370 °C (2550 °F)

Psi – 1,15,000 , MPa –760

Psi – 52,000 , MPa – 350

40%

 

Request
Callback
Yes! I am Interested

Hastelloy C276 Threaded Forged Fittings

Hastelloy C276 Threaded Forged Fittings
  • Hastelloy C276 Threaded Forged Fittings
  • Hastelloy C276 Threaded Forged Fittings
  • Hastelloy C276 Threaded Forged Fittings
  • Hastelloy C276 Threaded Forged Fittings
  • Hastelloy C276 Threaded Forged Fittings
  • Hastelloy C276 Threaded Forged Fittings
  • Hastelloy C276 Threaded Forged Fittings
  • Hastelloy C276 Threaded Forged Fittings
  • Hastelloy C276 Threaded Forged Fittings
Get Best Quote
Approx. Price: Rs 3,100 / NumberGet Latest Price
Product Brochure

Product Details:

BrandHastelloy C276 Threaded Forged Fittings
Size1/2 inch o 50 inch
MaterialHastelloy C276 Threaded Forged Fittings
Usage/Application- Off-Shore Oil Drilling Companies - Power Generation - Petrochemicals - Gas Processing - Specialty
Material GradeHastelloy C276 Threaded Forged Fittings
Thread SizeHastelloy C276 Threaded Forged Fittings
Country of OriginMade in India

HEUBACH INTERNATIONAL offers a wide range of Hastelloy Alloy C276 Forged Threaded Fittings , which is available in variegated specifications which suits diverse requirements of our esteemed customers. Hastelloy C276 Forged Threaded Elbow Fittings UNS N10276 has resisted the formation of grain boundary precipitates in the weld heat – affected zone, making it a candidate for most chemical and petrochemical processing applications in the as – welded condition. Hastelloy C276 Forged Threaded Tee Fittings has exceptional resistance to a wide variety of chemical environments. Hastelloy C276 Forged Threaded Cross Fittings is resistant to the formation of grain boundary precipitates in the weld heat – affected zone, thus making it suitable for most chemical process application in an as welded condition. Hastelloy C276 Forged Threaded Cap Fittings is weldable by all common methods except that excessive heat input should be avoided.   

Product Features:

  • Corrosion resistant
  • Accurate dimensions
  • Can sustain high pressure & temperature load
  • Rust proof finish
  • Smooth transition from flange thickness to pipe
  • Ensure excellent stress distribution

Specification:

Dimension Std.

ANSI/ASME B16.11 & BS3799, etc.

Specification

ASTM / ASME B/SB 564 / 160 / 472

Size

½” NB – 4” NB

Class

2000LBS, 3000LBS, 6000LBS, 9000LBS, etc.

Type

Socket Weld & Screwed – NPT, BSP, BSPT, Threaded Fittings

Hastelloy C276 Forged Threaded Fittings Chemical Composition

Grade

C

Mn

Si

S

Co

Ni

Cr

Fe

Mo

P

C276

0.01 max

1.00 max

0.08 max

0.03 max

2.50 max

50.99 min*

14.50 – 16.50

4.00 – 7.00

15.0 – 17.0

0.04 max

Hastelloy C276 Threaded Fitting Mechanical Properties

Density

Melting Point

Tensile Strength

Yield Strength (0.2%Offset)

Elongation

8.89 g/cm3

1370 °C (2500 °F)

Psi – 1,15,000 , MPa – 790

Psi – 52000 , MPa – 355

40 %

Equivalent Grades for C276 Hastelloy Forged Threaded Fittings

STANDARD

WERKSTOFF NR.

UNS

JIS

GOST

EN

OR

C276

2.4819

N10276

NW 0276

????65??????

NiMo16Cr15W

????760

Request
Callback
Yes! I am Interested

Incoloy 330/ SS 330/ RA 330 Threaded Forged Fittings

Incoloy 330/ SS 330/ RA 330 Threaded Forged Fittings
  • Incoloy 330/ SS 330/ RA 330 Threaded Forged Fittings
  • Incoloy 330/ SS 330/ RA 330 Threaded Forged Fittings
  • Incoloy 330/ SS 330/ RA 330 Threaded Forged Fittings